A little ecx barrage comparison

[Jeepkid]

More info and pics of the rocksta basher. It looks sick dude

Sent from my SM-G930P using Tapatalk

[spoo76]

Originally Posted by arevir

thanks,

Are those Scrambler bigger than the miclaw tires?
I dont recall seeing them before they must have been released recently or been out of stock forever.

so far which one is working better on the barrage?

They are a hair taller and more narrow. Not by much

Sent from my SM-N900T using Tapatalk

[R.Billy Rob]

The Scramblers measure around 62mm or 2 7/16” tall, and 21mm or 27/32” wide roughly. And the Miclaws are 59mm or 2 5/16” tall, and 24mm or 15/16” wide roughly. Here’s some comparison pics:

[arevir]

wow thanks for the photos.

those tires are definitely new to me, those miclaw stopped production about time someone came with a similar size tire.
To bad they are out of stock.

have you try them on about the same area/rocks how to they compare?

[Tennesseetommy81]

Originally Posted by arevir

wow thanks for the photos.

those tires are definitely new to me, those miclaw stopped production about time someone came with a similar size tire.
To bad they are out of stock.

have you try them on about the same area/rocks how to they compare?

I think the scramblers are better rubber I like my miclaws but I paid so much for them I'm scared to use them


Sent from my SAMSUNG-SM-J320A using Tapatalk

[R.Billy Rob]

I have yet to actually run the Scramblers. I have run the Miclaws though, and the are amazingly good tires. The tread is almost too aggressive, the lugs like to get caught under rock ledges if you’re not careful.

[arevir]

Originally Posted by Tennesseetommy81

I think the scramblers are better rubber I like my miclaws but I paid so much for them I'm scared to use them


Sent from my SAMSUNG-SM-J320A using Tapatalk

that funny, I also have the last set from rcmart, I am like you afraid to use them.

Originally Posted by R.Billy Rob

I have yet to actually run the Scramblers. I have run the Miclaws though, and the are amazingly good tires. The tread is almost too aggressive, the lugs like to get caught under rock ledges if you’re not careful.

it would be interesting to hear how the scrambler compare, cant wait for them to come back in stock.

[noel2]

Originally Posted by arevir

that funny, I also have the last set from rcmart, I am like you afraid to use them.



it would be interesting to hear how the scrambler compare, cant wait for them to come back in stock.

I emailed RC4WD a few days ago and they said the scramblers would be back in stock in 2-3 weeks.

[arevir]

Originally Posted by noel2

I emailed RC4WD a few days ago and they said the scramblers would be back in stock in 2-3 weeks.

ouch!

thanks.

[spoo76]

Imo don't be afraid to run them, that's what they are for and they do no good sitting there.
I have a set that I use and in most cases for Micro crawlers they will last a good while anyway.
I have another set new in package, but just the other day I was made an offer I couldn't refuse on my new in box Trekker, micro crawler, and new in package Miclaws. It will be sad to see them go and I'm sure I'll regret it for any amount haha. Plus even once the miclaws do wear our the scramblers are a great and more scale replacement. They are softer and stickier IMO

Sent from my SM-N900T using Tapatalk

[arevir]

Originally Posted by spoo76

Imo don't be afraid to run them, that's what they are for and they do no good sitting there.
I have a set that I use and in most cases for Micro crawlers they will last a good while anyway.
I have another set new in package, but just the other day I was made an offer I couldn't refuse on my new in box Trekker, micro crawler, and new in package Miclaws. It will be sad to see them go and I'm sure I'll regret it for any amount haha. Plus even once the miclaws do wear our the scramblers are a great and more scale replacement. They are softer and stickier IMO

Sent from my SM-N900T using Tapatalk

that so true, I need beadlocks to use them.

[spoo76]

I've never run them with beadlocks. In fact the bead is tight enough they lock on a standard micro wheel fine. The bead is also different enough that I don't know how well they'd fit in beadlocks for Losi style tires.

Sent from my SM-N900T using Tapatalk

[Tennesseetommy81]

Custom upper links to improve drive shaft angle with the punisher shafts for the 1/18 gelande. Hs-65mg servo is in and a badge winch

Sent from my SAMSUNG-SM-J320A using Tapatalk

[Tennesseetommy81]

.

Sent from my SAMSUNG-SM-J320A using Tapatalk

[Tennesseetommy81]

.

Sent from my SAMSUNG-SM-J320A using Tapatalk

[Tennesseetommy81]

Couple of pics on my little course

Sent from my SAMSUNG-SM-J320A using Tapatalk

[arevir]

Originally Posted by spoo76

I've never run them with beadlocks. In fact the bead is tight enough they lock on a standard micro wheel fine. The bead is also different enough that I don't know how well they'd fit in beadlocks for Losi style tires.

Sent from my SM-N900T using Tapatalk

I asked on the other thread about beadlock, but if they would work without that is nice as they are way cheaper lol.
what wheel are you using with the scrambler

Tennesseetommy81 those are some nice photos.
did you end up changing the trans how is running?
low end torque, fast?

[Tennesseetommy81]

Originally Posted by arevir

I asked on the other thread about beadlock, but if they would work without that is nice as they are way cheaper lol.
what wheel are you using with the scrambler

Tennesseetommy81 those are some nice photos.
did you end up changing the trans how is running?
low end torque, fast?

I use the rc4wd stamped steel wheels they 're cheap and have some weight to them the ftx trans and motor gives plenty of torque and decent wheel speed

Sent from my SAMSUNG-SM-J320A using Tapatalk

[Tennesseetommy81]

A short video

Sent from my SAMSUNG-SM-J320A using Tapatalk

[Tennesseetommy81]

Originally Posted by Tennesseetommy81

A short video

Sent from my SAMSUNG-SM-J320A using Tapatalk

Or not


Sent from my SAMSUNG-SM-J320A using Tapatalk