| |
03-16-2021, 03:52 AM
| #1 |
| Newbie Join Date: Mar 2019 Location: US
Posts: 14
|  Mini Z 4x4 LED Lights
I've got a set of the Kyosho LED lights installed on my Mini Z 4x4, but was wondering if there was a way to turn the lights completely on and off from the receiver. Is there an adapter for the LED lights to plug into which could turn the lights off and on via the third channel knob on the receiver? Thanks! Sent from my SM-N975U1 using Tapatalk |
|  |
| Sponsored Links | |
| | |
|
03-16-2021, 01:47 PM
| #2 |
| Newbie Join Date: Mar 2017 Location: Vineland
Posts: 29
| Re: Mini Z 4x4 LED Lights
Not familiar with the mini Z but if the lights plug into the receiver on an open channel (channel 3 for instance) and your radio has a 3rd channel switch you would just need to purchase an rc remote switch and install it between the lights and the receiver. Relatively cheap and available.
|
|
| |
|
03-16-2021, 02:12 PM
| #3 |
| Newbie Join Date: Mar 2019 Location: US
Posts: 14
| Re: Mini Z 4x4 LED Lights
Thanks. I was able to locate some 3rd channel switches for the SCX24 and some other RC models, but not for the Mini Z since it appears they use a different connector plug for the 3rd channel. And I have no idea what that connector is called. Sent from my SM-N975U1 using Tapatalk |
|
| |
 |
Mini Z 4x4 LED Lights - Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Axial SCX10 and AX24257 simple LED controller w/LED lights problem | driverx2 | Axial SCX-10 | 6 | 12-08-2014 08:31 PM |
| |
Linear Mode
