scx24 bouncer Rage Reloaded

[ben h]

any one used this cage for a bouncer setup? keep putting it off into the corner because it just seems to not work great.
have 2 steering axles under it and with extended shocks i get maybe .25in of up travel. ill grab pics of how it sits tonight thought i took some the other day but forgot
this is the cage i have

https://www.shapeways.com/product/UU...110&li=ostatus

[AK KRAWLER]

I believe that is more of a crawler chassis.

This thread may give some insight for a bouncer chassis.
SCX24 Bouncer Chassis Build w/ Big Motor

[R.Billy Rob]

Originally Posted by AK KRAWLER

I believe that is more of a crawler chassis.

This thread may give some insight for a bouncer chassis.
SCX24 Bouncer Chassis Build w/ Big Motor

That chassis is based off of a 1:1 bouncer, so it should work as one. I did find this in the description from Shapeways.
“Front and rear links must be reversed, shocks should be extended if extreme articulation is required”
So maybe that might help? Sounds like some extended shocks are in order!
Here’s a pic of the 1:1 bouncer.

[AK KRAWLER]

Originally Posted by R.Billy Rob

That chassis is based off of a 1:1 bouncer, so it should work as one. I did find this in the description from Shapeways.
“Front and rear links must be reversed, shocks should be extended if extreme articulation is required”
So maybe that might help? Sounds like some extended shocks are in order!

Gotcha, I completely missed the whole description.

I would only think you would do this "shocks should be extended if extreme articulation is required", if wanting to use it as a crawler. I have never owned a bouncer, so I am not sure of the setup.
From your original post, it sounds like you already had the extended shocks.

I will kindly bow out of this one, as I have no first hand knowledge of bouncers.
Unless they are the big guys at the bar , then I have plenty of knowledge

[ben h]

i did put on the links backwards when i did it long up front short in the back. i have the extended shocks im assuming is what these are called. just wasnt sure if i was missing somthing. extended shocks almost seem bad cuz you do anything fast its gunna crash the servo into the frame and break so thought id ask others inputs