RCCrawler Forums

JEFF THE JET · 01-30-2008, 02:32 PM

Anybody Wants To Come Up With A Logo I Can Get Them Made Up?

hairba11 · 01-30-2008, 05:13 PM

we're pretty laid back, do you have any ideas?

JEFF THE JET · 01-30-2008, 05:28 PM

Somthing Like The Gateway Arch, Under The Arch Sits The Rockcrawler On The Rccrawler Logo With 'gateway Scale Rock Crawler Under All That?.......or A Crawler On The Side Of The Arch?

hairba11 · 01-31-2008, 08:20 AM

probably not

max power · 01-31-2008, 12:12 PM

^freaked me out a little^

I used this as my scale4x4 sig

Nacho · 01-31-2008, 12:21 PM

How about a crawler flexing on the arch...with the wording below

hairba11 · 01-31-2008, 04:12 PM

Quote:

Originally Posted by Nachos02ss

How about a crawler flexing on the arch...with the wording below

I like it. using the arch as an articulation ramp. I'll look through my pics and see if anything would stand a little photoshopping

:edit:

RCminded · 01-31-2008, 06:27 PM

You might want to keep it a little more simple than that. I think the sillouetted truck is the way to go. Something that can easily be made small without being to condensed. I like the Idea od the arch but maybe over the crawler not with the crawler on it. Just my .02!

Nacho · 01-31-2008, 06:38 PM

Wish i could photoshop..I was thinkin Crawler and Arch of the same size,just one wheel on it,not even all the way up..all in B/W

but im new here, dont listen to me

hairba11 · 01-31-2008, 06:55 PM

try this on for size

need to clean up the tire/arch intersection, but I think it's ok in vision

hairba11 · 01-31-2008, 07:09 PM

Here's one for Nacho

JEFF THE JET · 01-31-2008, 07:15 PM

KEEP THEM COMEING.

Nacho · 01-31-2008, 07:19 PM

Quote:

Originally Posted by hairba11

Here's one for Nacho

SWEET

JEFF THE JET · 02-19-2008, 12:40 PM

At The March Gtg. I Cant Show Them Right Now So You'll Have To Wait Tell Then.:-p I Think We Can Get Shirts To .btw Do Any Of The 'local' Guys Have A 1/6 Nylint ? I Need One For My Son.

Hawk Mortimer · 02-19-2008, 03:42 PM

hairball, I like the Arch and the AX10, if only you could find an AX10 with the front wheel up. You done good hairball.

Keep it up.

Wish I knew how to post pictures. Oh well, what is it they say bout old dogs and new tricks?

Nacho · 02-19-2008, 04:24 PM

I can take another pc of mine with the front flexed instead,if you guys would like.

RCminded · 02-19-2008, 11:00 PM

I don't mean to nit pick but I would make alot more simple and more generic.

hairba11 · 02-20-2008, 08:31 AM

I would also, I was knocking those out for fun. To make a successful logo, you don't want grayscale, you need solid color so it can be cut out of a vinyl if you want.

Looking at the way the rccrawler logo looks, I could probably duplicate that using a photo, but it will be harder, and I'm busy. monday was columbia, tuesday was chicago and back, thursday I'm taking of for pennsylvania and new york.

nacho, go ahead and email me a photo of your truck articulating. give me a shot from the drivers side, with driver's front down and passenger front up. a front 3/4 veiw will work, but try and support the camera so it is fairly level (like you walked up to the real truck and took a pic instead of flying in from a helicopter)

JEFF THE JET · 02-20-2008, 01:55 PM

i'll show you guys at thr march gtg.it has the rccrawler truck under the arch ,it looks pretty cool . they are 1 color . i copied the jeep off of this site ?

Nacho · 02-20-2008, 05:26 PM

heres a lil flex....

alota flex...

Hey you guys dont have to use this at all, i was just trying to throw in a idea also,sorry if i stepped on any toes:neutral:

01-30-2008, 02:32 PM	#1
JEFF THE JET Quarry Creeper Join Date: Dec 2005 Location: ST LOUIS.MO Posts: 441	Decals For Gsrc Anybody Wants To Come Up With A Logo I Can Get Them Made Up?

01-30-2008, 05:28 PM	#3
JEFF THE JET Quarry Creeper Join Date: Dec 2005 Location: ST LOUIS.MO Posts: 441	Well Heres An Idea Somthing Like The Gateway Arch, Under The Arch Sits The Rockcrawler On The Rccrawler Logo With 'gateway Scale Rock Crawler Under All That?.......or A Crawler On The Side Of The Arch?

01-31-2008, 12:12 PM	#5
max power Rock Stacker Join Date: Dec 2005 Location: 8 feet underground Posts: 61	^freaked me out a little^ I used this as my scale4x4 sig Attached Images

01-31-2008, 07:15 PM	#12
JEFF THE JET Quarry Creeper Join Date: Dec 2005 Location: ST LOUIS.MO Posts: 441	Looks Good So Far KEEP THEM COMEING.

02-19-2008, 12:40 PM	#14
JEFF THE JET Quarry Creeper Join Date: Dec 2005 Location: ST LOUIS.MO Posts: 441	I'll Have The Decals At The March Gtg. I Cant Show Them Right Now So You'll Have To Wait Tell Then.:-p I Think We Can Get Shirts To .btw Do Any Of The 'local' Guys Have A 1/6 Nylint ? I Need One For My Son.

01-30-2008, 05:13 PM	#2
hairba11 RCC Addict Join Date: Mar 2007 Location: St. Louis (High Ridge) Posts: 1,279	we're pretty laid back, do you have any ideas?

01-31-2008, 08:20 AM	#4
hairba11 RCC Addict Join Date: Mar 2007 Location: St. Louis (High Ridge) Posts: 1,279	probably not

01-31-2008, 12:21 PM	#6
Nacho Quarry Creeper Join Date: Dec 2007 Location: St. Louis Posts: 210	How about a crawler flexing on the arch...with the wording below

01-31-2008, 06:27 PM	#8
RCminded Newbie Join Date: Sep 2007 Location: St. Louis Posts: 32	You might want to keep it a little more simple than that. I think the sillouetted truck is the way to go. Something that can easily be made small without being to condensed. I like the Idea od the arch but maybe over the crawler not with the crawler on it. Just my .02!

01-31-2008, 06:38 PM	#9
Nacho Quarry Creeper Join Date: Dec 2007 Location: St. Louis Posts: 210	Wish i could photoshop..I was thinkin Crawler and Arch of the same size,just one wheel on it,not even all the way up..all in B/W but im new here, dont listen to me

01-31-2008, 06:55 PM	#10
hairba11 RCC Addict Join Date: Mar 2007 Location: St. Louis (High Ridge) Posts: 1,279	try this on for size need to clean up the tire/arch intersection, but I think it's ok in vision

01-31-2008, 07:09 PM	#11
hairba11 RCC Addict Join Date: Mar 2007 Location: St. Louis (High Ridge) Posts: 1,279	Here's one for Nacho

02-19-2008, 03:42 PM	#15
Hawk Mortimer Quarry Creeper Join Date: Jan 2007 Location: Hawk Point Posts: 195	hairball, I like the Arch and the AX10, if only you could find an AX10 with the front wheel up. You done good hairball. Keep it up. Wish I knew how to post pictures. Oh well, what is it they say bout old dogs and new tricks?

02-19-2008, 04:24 PM	#16
Nacho Quarry Creeper Join Date: Dec 2007 Location: St. Louis Posts: 210	I can take another pc of mine with the front flexed instead,if you guys would like.

02-19-2008, 11:00 PM	#17
RCminded Newbie Join Date: Sep 2007 Location: St. Louis Posts: 32	I don't mean to nit pick but I would make alot more simple and more generic.

Sponsored Links

02-20-2008, 08:31 AM	#18
hairba11 RCC Addict Join Date: Mar 2007 Location: St. Louis (High Ridge) Posts: 1,279	I would also, I was knocking those out for fun. To make a successful logo, you don't want grayscale, you need solid color so it can be cut out of a vinyl if you want. Looking at the way the rccrawler logo looks, I could probably duplicate that using a photo, but it will be harder, and I'm busy. monday was columbia, tuesday was chicago and back, thursday I'm taking of for pennsylvania and new york. nacho, go ahead and email me a photo of your truck articulating. give me a shot from the drivers side, with driver's front down and passenger front up. a front 3/4 veiw will work, but try and support the camera so it is fairly level (like you walked up to the real truck and took a pic instead of flying in from a helicopter)

02-20-2008, 01:55 PM	#19
JEFF THE JET Quarry Creeper Join Date: Dec 2005 Location: ST LOUIS.MO Posts: 441	i already have a few made up i'll show you guys at thr march gtg.it has the rccrawler truck under the arch ,it looks pretty cool . they are 1 color . i copied the jeep off of this site ?

02-20-2008, 05:26 PM	#20
Nacho Quarry Creeper Join Date: Dec 2007 Location: St. Louis Posts: 210	heres a lil flex.... alota flex... Hey you guys dont have to use this at all, i was just trying to throw in a idea also,sorry if i stepped on any toes:neutral:

RCCrawler Forums

Thread: Decals For Gsrc