KCRC - Kansas City Remote Crawlers -

[ohh EPiC FAiL]

happy bday!

[the DMG]

seen this in a thread,
someone said they changed a rule in sportsman/2.2S class - body/body-less national level rule change !


looked it up & it now says:
2.2S rule 2.5.5:
body's only - no body-less rigs in 2.2s class

can our regional rules representative clarify/confirm this change ??

& fun comp today guys

[Harley]

Yes, the 2.2S class is bodies rigs only. On a CLUB level you can run it as a sportsman class still and run bodiless. I felt no reason to stress this as a local level. Most people are not looking to compete nationally so I figure we will just let people have fun and run whatever they like.

[schiesz]

Originally Posted by RivBlueNoma

Thanks, Chris. And 48 isn't right.

He's just bumping it up so he can buy smokes :-) happy birthday Brian .

[Nish]

Originally Posted by BC Racing

You will want the 5mm one's then......doubt I have six, but should have at least a few.

Yes it's the 5mm I need. I have 2 & I think Matt has 2 for me if you have an extra pair that would be great

[BC Racing]

Working on a new prototype....would anyone have a set of the 19mm Junfac wheel wideners, the blue ones, (specifically the 20mm barrel nuts) that I might borrow for proof of concept? Having trouble locating the barrel nuts without having to order from H-Kong, gonna check one more place locally today. thx

[Harley]

Originally Posted by BC Racing

Working on a new prototype....would anyone have a set of the 19mm Junfac wheel wideners, the blue ones, (specifically the 20mm barrel nuts) that I might borrow for proof of concept? Having trouble locating the barrel nuts without having to order from H-Kong, gonna check one more place locally today. thx

90% sure I do.

[muddauber7]

For Sale!

I have a barely used, Black, VP hurst dig with stock Axial Trans going up for sale later today.
Unless someone local was interested. I'm thinking around $110

Also, perhaps an Axial EXO roller up for sale as well.
Normal wear and tear, light bar and rear roof scratches, chassis street scrapes.
Great truck, just don't have time to drive it that often.
And could use the chedda for other things. Not sure on price yet...

[ev0l]

that EXO would be a great score. To get one and not have to build it! They are a blast to drive!

[CromagnonCommando]

I have an Extra- NEW Wraith Body Cage(bought for a different project that went south), New Unpainted/Not Trimmed Exterior Body Panels, Seats, all interior junk that comes in kit as well as a bunch of plastic from my Honcho, Dingo, and Wraith kits and the stock(4) Wraith Wheels -never glued or installed- (4)1.9 Wheels and tires from The Dingo Kit never glued or installed (4) Stock Honcho Wheels Factory Glued- Never ran on At All -ALL FOR SALE. WILL CONSIDER TRADES BUT NEED AS FEW $ FOR NEW PROJECTS TOO...WILL GIVE A GREAT DEAL FOR CASH OFFER. JUST MAKE ME A FAIR OFFER FOR ALL OF IT AND IT'S YOURS.. There is no battery tray or Rx box but upper 3 links and plastic lowers for wraith and scx10 in there too. I can take pics for anyone interested.. Wraith Kit Stickers Too......... The Wraith Trans Mount/Skid Plate is there too (NEW)

[ev0l]

Any of you guys have an Axial AX-3 rx laying around or Tx/Rx? looking for a set cheap.

[MrDublin]

Originally Posted by scaryclownguy

Anyone got any motors for an mrc? I think I need a new one...

I have a stock motor that I would part with. Let me know if your interested.

[ohh EPiC FAiL]

Anyone got some torquemaster pro bushes (stand up type)? Bought some used motors and the brushes arent usable. I'm hoping to comp Saturday let me know ASAP!


Sent from my iPhone 4S using Tapatalk

[RivBlueNoma]

You might check with Chuck at Fastlane. He might still have some brushes like you need on the shelf. They may not be the same compound and he won't know since he has probably never heard of a Torquemaster motor.

[ohh EPiC FAiL]

Originally Posted by RivBlueNoma

You might check with Chuck at Fastlane. He might still have some brushes like you need on the shelf. They may not be the same compound and he won't know since he has probably never heard of a Torquemaster motor.

I would but because of his hours I won't be able to get up there before Saturday. If no one has some I can check hobbytown.


Sent from my iPhone 4S using Tapatalk

[RivBlueNoma]

I'm not sure what part of town you live in but Hobby Haven might also be an option.

Originally Posted by ohh EPiC FAiL

I would but because of his hours I won't be able to get up there before Saturday. If no one has some I can check hobbytown.


Sent from my iPhone 4S using Tapatalk

[ohh EPiC FAiL]

yeah i'll call them if eric doesn't have any. i only go there if there's no other option

[RivBlueNoma]

Can't blame you there. If HT wasn't an hour drive from my house I'd go there a lot more often.

Originally Posted by ohh EPiC FAiL

yeah i'll call them if eric doesn't have any. i only go there if there's no other option

[muddauber7]

If you need some brushes, come get 'em, just got some.

Shoot me a pm.
Be around all day tomorrow.

[FreqEsKinz]

Originally Posted by ev0l

Any of you guys have an Axial AX-3 rx laying around or Tx/Rx? looking for a set cheap.

Yes sir, radio and receiver, new. Sell for what I paid Harley for it. $50

I need to talk to you anyway..... call or pm.