Go Back   RCCrawler Forums > Vendors > MOD19RC
Loading

Notices

Thread: SCX24 ECX Barrage Motor Mount

Reply
 
LinkBack Thread Tools Display Modes
Old 01-04-2020, 02:44 PM   #1
Let me 3D Print that...
 
RexRacer19's Avatar
 
Join Date: Jun 2007
Location: Concord
Posts: 281
Default SCX24 ECX Barrage Motor Mount

Now available for the Axial Racing SCX24 is a 3D printed brass motor mount that lets you install the 1/24 ECX Barrage motor into the SCX24. As folks modify and add weight to the SCX24 the stock motor starts to struggle and many report early failures. A popular upgrade motor is the ECX Barrage motor. It is a FF-050 motor which is a similar format but longer. This motor has good low end and more torque than the stock motor, but has a different hole pattern than the stock 030 motor. Some folks have drilled their mounts to accept the barrage motor with mixed results.

The Mod19RC ECX Barrage motor mount takes the guesswork out of the swap. It is a direct replacement for the factory motor mount and allows you to use either the stock motor size or the Barrage motor size.








The stock battery tray needs to be modified for the the larger motor to fit. The Mod19RC Low CG battery tray does not work in it's current design, but the Super Low CG battery tray will work by removing one leg of the mount and cutting it flush with the side of the tray. (see pics) This motor will fit in the Micro Shark conversion. If the Micro Shark was purchased before 12/23/19 then you will have to clearance the interior crossmember to get it to fit correctly. Micro Sharks purchased after 12/23/19 have this clearance already added.









The ECX Barrage Motor mount can be found in the SCX24 section of the Mod19RC Shapeways store here: https://www.shapeways.com/shops/mod1...CX24+Parts&s=0
RexRacer19 is offline   Reply With Quote
Sponsored Links
Old 01-29-2020, 03:07 PM   #2
MEOW
 
Natedog's Avatar
 
Join Date: Jan 2006
Location: Wackifornia
Posts: 11,860
Default Re: SCX24 ECX Barrage Motor Mount

Wow, very nicely done!
Natedog is offline   Reply With Quote
Old 01-30-2020, 10:25 AM   #3
Let me 3D Print that...
 
RexRacer19's Avatar
 
Join Date: Jun 2007
Location: Concord
Posts: 281
Default Re: SCX24 ECX Barrage Motor Mount

Thanks!
RexRacer19 is offline   Reply With Quote
Reply



SCX24 ECX Barrage Motor Mount - Similar Threads
Thread Thread Starter Forum Replies Last Post
ECX Barrage Double Motor Tranny Shape_Shifter Micro Scale Rigs 34 08-01-2019 09:38 PM
ECX Barrage - motor getting very hot, traxxas 380 upgrade? 2k2wranglerx General Scale Talk 22 11-21-2018 06:37 AM
Ecx barrage motor upgrade? Yotaboy89 Micro Scale Rigs 10 09-03-2018 02:30 PM
Ecx barrage motor upgrade? Darrell Newbie General 5 06-08-2017 01:35 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 05:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com