RCCrawler Forums

Unimoger · 09-02-2009, 12:35 PM

Guys, this topic has come up many times and we are thinking about adding it to scale nats this next year. What do you guys think about having some comps with these little guys in montana over the next few months to see how it goes? The ORCRC crew has been doing this for awhile and had GREAT success with it. This in NO way will take away from our regular comps, just an added bonus for those who want to participate.

How many people have CC-01's already?
How many people would buy and build one if we had a class?
How many people are as excited as I am to run them in a group?

Post up, I want to hear all thoughts.

here are the rules that OREGON runs:

Class rules:

1. Must use a CC-01/XC chassis.
2. Must have IFS.
3. Must have a hardbody.
4. Steering servo must be in the stock location.

Course design:

CC-01/XC's will run a standard 10 gate 1.9 course, modified to make it slightly easier. CC-01/XC trucks will run first, before the 1.9's.

CC-01/XC's will be able to run the new class or 1.9 class but not both (Please pick a class, and stick with it throughout the series).

TruckerBrad · 09-02-2009, 12:52 PM

I'm ordering one this weekend and should have the rest of the parts within a month.

montana.matt · 09-02-2009, 12:55 PM

You're only doing this because you bought somebody's orange Why J

(count me in

)

montana.matt · 09-02-2009, 12:58 PM

Seriously, though... After talking to you yesterday about it, I'm in fo sho

It sounds like a lot of fun to me.... I'll put my super on the back shelf to get a CC-01 going I guess

Yawzer · 09-02-2009, 05:42 PM

Ya, I will very probably get one also - since Matts getting one & he's my hero

montana.matt · 09-02-2009, 06:08 PM

Quote:

Originally Posted by Yawzer

Ya, I will very probably get one also - since Matts getting one & he's my hero

If Ron's getting one, I'm not

squatch71 · 09-02-2009, 10:22 PM

I'd be in...but why the servo in the stock location...I'm going to move mine...can I haul around my trailer when I get that built as well....

montana.matt · 09-02-2009, 10:23 PM

Quote:

Originally Posted by squatch71

I'd be in...but why the servo in the stock location...I'm going to move mine...can I haul around my trailer when I get that built as well....

Those are the rules ORCRC use and they work, so why change them?

I'd imagine you could haul your trailer around, but I don't know why you'd want to do that since it would put you at a serious disadvantage in a comp

montana.matt · 09-02-2009, 10:56 PM

Was going through some old pics tonight..... Might have to resurrect my CC-01 FJ Cruiser

Unimoger · 09-03-2009, 09:14 AM

I love that truck matt. Here is a pic of my new CC-01 courtesy of K2. this was at norris.

I also have a roller CC-01 with a pajero body that has been made in to a pickup, has a rc3wd gear reduction unit , 645 servo, locked diffs and bearings, if anyone needs a truck to get started it would be a good one, hit me up.

montana.matt · 09-03-2009, 09:21 AM

Ya, K2's Why J is a nice rig

PM sent about the CC-01

Unimoger · 09-03-2009, 11:26 AM

Quote:

Originally Posted by montana.matt

Ya, K2's Why J is a nice rig

PM sent about the CC-01

here ya go matt.

kennebell50 · 09-03-2009, 12:08 PM

You can count me in for this. I've been watching for a Wrangler for awhile and when one pops up I'll get it. Don't want to build a new one, don't have the time.

BTW when would an event be held.

squatch71 · 09-03-2009, 12:42 PM

Quote:

Originally Posted by montana.matt

Those are the rules ORCRC use and they work, so why change them?

I'd imagine you could haul your trailer around, but I don't know why you'd want to do that since it would put you at a serious disadvantage in a comp

was just a question, why not improve on something

as far as the trailer...would go for the more "scale" look

montana.matt · 09-03-2009, 01:15 PM

Thanks for posting the pics of that CC-01 Ben

montana.matt · 09-03-2009, 01:21 PM

Quote:

Originally Posted by squatch71

was just a question, why not improve on something

That's cool, but my vote would have to go to keeping the rules the way they are already

There's a couple reasons for that and I'm sure Ben will tell us soon enough

Quote:

Originally Posted by squatch71

as far as the trailer...would go for the more "scale" look

I had a trailer (Ben has it now) that I towed around with my FJ Cruiser CC-01 and it was good on the flat stuff, but when it came to any "serious" off roading, I left the trailer on the side of the road. Just too much dead weight... For the "scale" look, you can't beat a trailer behind your rig, though

kennebell50 · 09-04-2009, 09:20 AM

I found one with a long wheel base chassis but appears to be unaltered from stock. Is that OK for the comp?

montana.matt · 09-04-2009, 10:49 AM

Quote:

Originally Posted by kennebell50

I found one with a long wheel base chassis but appears to be unaltered from stock. Is that OK for the comp?

I would think so. Sounds like you found the Touraeg chassis, which has a longer wheelbase than the Jeep, Jero, etc

skid · 09-04-2009, 12:18 PM

Guess I'll have to keep an eye on this for more info.

http://www3.towerhobbies.com/cgi-bin...?&I=LXYEH3&P=7

cc-01 land cruiser.

TruckerBrad · 09-04-2009, 02:17 PM

Is there a pic on Tamiya's site? Might have to get that instead of a Jeep.

09-02-2009, 12:35 PM	#1
Unimoger I wanna be Dave Join Date: Aug 2005 Location: G6'N Posts: 7,391	~~ CC-01 Scale Class ~~ Guys, this topic has come up many times and we are thinking about adding it to scale nats this next year. What do you guys think about having some comps with these little guys in montana over the next few months to see how it goes? The ORCRC crew has been doing this for awhile and had GREAT success with it. This in NO way will take away from our regular comps, just an added bonus for those who want to participate. How many people have CC-01's already? How many people would buy and build one if we had a class? How many people are as excited as I am to run them in a group? Post up, I want to hear all thoughts. here are the rules that OREGON runs: Class rules: 1. Must use a CC-01/XC chassis. 2. Must have IFS. 3. Must have a hardbody. 4. Steering servo must be in the stock location. Course design: CC-01/XC's will run a standard 10 gate 1.9 course, modified to make it slightly easier. CC-01/XC trucks will run first, before the 1.9's. CC-01/XC's will be able to run the new class or 1.9 class but not both (Please pick a class, and stick with it throughout the series).

09-02-2009, 12:55 PM	#3
montana.matt RCC Addict Join Date: Dec 2007 Location: On The Lake Posts: 1,449	You're only doing this because you bought somebody's orange Why J (count me in)

09-02-2009, 12:52 PM	#2
TruckerBrad Quarry Creeper Join Date: Sep 2008 Location: Oakley Posts: 280	I'm ordering one this weekend and should have the rest of the parts within a month.

09-02-2009, 12:58 PM	#4
montana.matt RCC Addict Join Date: Dec 2007 Location: On The Lake Posts: 1,449	Seriously, though... After talking to you yesterday about it, I'm in fo sho It sounds like a lot of fun to me.... I'll put my super on the back shelf to get a CC-01 going I guess

09-02-2009, 05:42 PM	#5
Yawzer Quarry Creeper Join Date: Nov 2007 Location: Bozeman, MT Posts: 292	Ya, I will very probably get one also - since Matts getting one & he's my hero

09-02-2009, 10:22 PM	#7
squatch71 I wanna be Dave Join Date: Sep 2008 Location: four o six Posts: 2,101	I'd be in...but why the servo in the stock location...I'm going to move mine...can I haul around my trailer when I get that built as well....

09-02-2009, 10:56 PM	#9
montana.matt RCC Addict Join Date: Dec 2007 Location: On The Lake Posts: 1,449	Was going through some old pics tonight..... Might have to resurrect my CC-01 FJ Cruiser

09-03-2009, 09:14 AM	#10
Unimoger I wanna be Dave Join Date: Aug 2005 Location: G6'N Posts: 7,391	I love that truck matt. Here is a pic of my new CC-01 courtesy of K2. this was at norris. I also have a roller CC-01 with a pajero body that has been made in to a pickup, has a rc3wd gear reduction unit , 645 servo, locked diffs and bearings, if anyone needs a truck to get started it would be a good one, hit me up.

09-03-2009, 09:21 AM	#11
montana.matt RCC Addict Join Date: Dec 2007 Location: On The Lake Posts: 1,449	Ya, K2's Why J is a nice rig PM sent about the CC-01

09-03-2009, 12:08 PM	#13
kennebell50 Pebble Pounder Join Date: Oct 2006 Location: Leaving black marks on Hwy 200 Posts: 129	You can count me in for this. I've been watching for a Wrangler for awhile and when one pops up I'll get it. Don't want to build a new one, don't have the time. BTW when would an event be held.

09-03-2009, 01:15 PM	#15
montana.matt RCC Addict Join Date: Dec 2007 Location: On The Lake Posts: 1,449	Thanks for posting the pics of that CC-01 Ben

09-04-2009, 09:20 AM	#17
kennebell50 Pebble Pounder Join Date: Oct 2006 Location: Leaving black marks on Hwy 200 Posts: 129	I found one with a long wheel base chassis but appears to be unaltered from stock. Is that OK for the comp?

Sponsored Links

09-04-2009, 12:18 PM	#19
skid Rock Crawler Join Date: Nov 2004 Location: in a basement in Kalispell, MT Posts: 857	Guess I'll have to keep an eye on this for more info. http://www3.towerhobbies.com/cgi-bin...?&I=LXYEH3&P=7 cc-01 land cruiser.

09-04-2009, 02:17 PM	#20
TruckerBrad Quarry Creeper Join Date: Sep 2008 Location: Oakley Posts: 280	Is there a pic on Tamiya's site? Might have to get that instead of a Jeep.

RCCrawler Forums

Thread: ~~ CC-01 Scale Class ~~

Thread: CC-01 Scale Class