RCCrawler Forums

Mini · 04-30-2009, 09:16 AM

I gues crawling and drifting go hand in hand except drifting is still a little underground, I wish it had the support that other rc stuff had. Any way here's my baby's enjoy.

Here are some of my many body pics adn my chassis's.
The chassis are a TT full hopped, a TA-R 3 Racing Fully Hopped that was then converted to a Fully Hopped TA05R Square, and a Yokomo SD converted into a Drift Master SD Fully Hopped. Enjoy.

JOOTZ · 05-01-2009, 03:03 PM

1M cupracer drift

Mini · 05-02-2009, 10:06 AM

Here's a little vid of a comp we had last weekend I took first, you'll see my car at the end doing the victory drift

http://www.rcdriftcentral.com/videos/Round2.wmv

dorji · 05-02-2009, 11:14 AM

Heres my drifter, a Yokomo Lcg with most of the upgrades, with a Novak slydr 6.5, running on a 2s 5000mah from cheapbatterypacks.com

Yokomo s-13

Hpi s-15

JOOTZ · 05-22-2009, 03:47 PM

akapmar · 05-23-2009, 01:38 AM

Mr. Hayashi's Levin Trueno
Futaba S9451 servo
Dynamite 15t ESC
Yokomo 23T motor

marmech · 05-24-2009, 10:44 PM

CC-01 drifter project

YoUnG_vErSiOn · 06-03-2009, 02:41 AM

that is all.

JOOTZ · 06-10-2009, 07:10 PM

JOOTZ · 06-10-2009, 07:11 PM

KvilleKrawler · 06-18-2009, 09:59 AM

This was my drift car. Looking back I wish I didn't trade it.

HPI Sprint 2 drift
Castle Creations Mamba Max
Castle Creations 4600 Kv BL
Hitec BB steering servo (can't remember the model #)
Spektrum DX3R TX \ RX SR 3100

bassguitar · 06-26-2009, 12:16 PM

Here's my TA03-F Drifter.
To many hop ups to list - most of the purple GPM bits available.
Mamba Max 5700.

It's pretty much a shelf queen cause it's so damn pretty rare and expensive!

Mini · 06-26-2009, 12:36 PM

Quote:

Originally Posted by bassguitar

Here's my TA03-F Drifter.
To many hop ups to list - most of the purple GPM bits available.
Mamba Max 5700.

It's pretty much a shelf queen cause it's so damn pretty rare and expensive!

You have the chassis of my dreams

Been wanting to build one up but to find parts especially hop-ups is almost imposiable. Great looking chassis

rx-7 · 07-13-2009, 07:49 AM

I run Both of These bodies on a Fully Hopped up HPI Sprint 2 Drift, I run a Novak Havoc 8.5 brushless system and 2s lipo.

and another Shell i've Done:

MadForce · 07-16-2009, 04:04 PM

These are my babies. I drive the Coppermix which is a TB-03D with a hobbywing 9t combo a sanwa VR and DX3R. The 320 is my older TT-01D that I have lent to a good buddy with whom with drift together every monday night. It has a tamiya dyna run with RV-15 esc and MX3A and a VR servo as well.

Goose · 07-28-2009, 01:08 AM

Heres my AE86 on a RS4 Pro2

my Skyline ER34, aka Purple Cow, also on my Pro2

And last but not least my Micro RS4 Penguin chassis with a RX7 Body

DickyT · 08-24-2009, 12:49 PM

My x-ray t2

and with a different shell\rims on:

stuboy · 08-27-2009, 01:39 PM

hpi pro 4
hpi t drift
lock front and rear diffs
brm 19t motor
acoms 2.4 ghz
tamiya ta03f pro drifter
27t stock motor

S.I.C · 10-07-2009, 10:15 PM

Here's my micro rs4 drifter...

Destroyah · 10-23-2009, 03:39 PM

TT01 w/sport tuned 540motor (tow hooks f/r, intercooler, tail pipe, time attack style wheels w/drift tires)

SC10: twin pipes and clip cables.....nothing too in depth

04-30-2009, 09:16 AM	#61
Mini "HOLLYWOOD" Join Date: Dec 2008 Location: Miami Posts: 3,119	I gues crawling and drifting go hand in hand except drifting is still a little underground, I wish it had the support that other rc stuff had. Any way here's my baby's enjoy. Here are some of my many body pics adn my chassis's. The chassis are a TT full hopped, a TA-R 3 Racing Fully Hopped that was then converted to a Fully Hopped TA05R Square, and a Yokomo SD converted into a Drift Master SD Fully Hopped. Enjoy. Attached Images

05-22-2009, 03:47 PM	#65
JOOTZ RCC Addict Join Date: Nov 2008 Location: never been Posts: 1,317	Sty

05-23-2009, 01:38 AM	#66
akapmar Newbie Join Date: Apr 2009 Location: Doha Posts: 27	Yokomo Drift Plus Mr. Hayashi's Levin Trueno Futaba S9451 servo Dynamite 15t ESC Yokomo 23T motor

06-03-2009, 02:41 AM	#68
YoUnG_vErSiOn REST IN ALOHA CHIP Join Date: Nov 2005 Location: * Posts: 3,549	team zigzag ninjas that is all.

06-10-2009, 07:10 PM	#69
JOOTZ RCC Addict Join Date: Nov 2008 Location: never been Posts: 1,317	SuperStreet KPGC10

05-01-2009, 03:03 PM	#62
JOOTZ RCC Addict Join Date: Nov 2008 Location: never been Posts: 1,317	1M cupracer drift

05-02-2009, 10:06 AM	#63
Mini "HOLLYWOOD" Join Date: Dec 2008 Location: Miami Posts: 3,119	Here's a little vid of a comp we had last weekend I took first, you'll see my car at the end doing the victory drift http://www.rcdriftcentral.com/videos/Round2.wmv

05-02-2009, 11:14 AM	#64
dorji Quarry Creeper Join Date: Jun 2005 Location: in the middle of the pacific ocean Posts: 455	Heres my drifter, a Yokomo Lcg with most of the upgrades, with a Novak slydr 6.5, running on a 2s 5000mah from cheapbatterypacks.com Yokomo s-13 Hpi s-15

05-24-2009, 10:44 PM	#67
marmech Pebble Pounder Join Date: Mar 2007 Location: Toronto Posts: 119	CC-01 drifter project

06-10-2009, 07:11 PM	#70
JOOTZ RCC Addict Join Date: Nov 2008 Location: never been Posts: 1,317

06-18-2009, 09:59 AM	#71
KvilleKrawler Quarry Creeper Join Date: Oct 2007 Location: Kernersville Posts: 352	This was my drift car. Looking back I wish I didn't trade it. HPI Sprint 2 drift Castle Creations Mamba Max Castle Creations 4600 Kv BL Hitec BB steering servo (can't remember the model #) Spektrum DX3R TX \ RX SR 3100 Attached Images

06-26-2009, 12:16 PM	#72
bassguitar Rock Stacker Join Date: Jan 2009 Location: Toronto Posts: 93	Here's my TA03-F Drifter. To many hop ups to list - most of the purple GPM bits available. Mamba Max 5700. It's pretty much a shelf queen cause it's so damn pretty rare and expensive!

07-13-2009, 07:49 AM	#74
rx-7 Newbie Join Date: Jul 2009 Location: Williamsburk Posts: 0	I run Both of These bodies on a Fully Hopped up HPI Sprint 2 Drift, I run a Novak Havoc 8.5 brushless system and 2s lipo. and another Shell i've Done:

07-16-2009, 04:04 PM	#75
MadForce RCC Addict Join Date: Nov 2008 Location: Greece, sun, sea and rocks Posts: 1,242	These are my babies. I drive the Coppermix which is a TB-03D with a hobbywing 9t combo a sanwa VR and DX3R. The 320 is my older TT-01D that I have lent to a good buddy with whom with drift together every monday night. It has a tamiya dyna run with RV-15 esc and MX3A and a VR servo as well.

07-28-2009, 01:08 AM	#76
Goose Newbie Join Date: Jan 2009 Location: Detroit Posts: 37	Heres my AE86 on a RS4 Pro2 my Skyline ER34, aka Purple Cow, also on my Pro2 And last but not least my Micro RS4 Penguin chassis with a RX7 Body

Sponsored Links

08-24-2009, 12:49 PM	#77
DickyT I wanna be Dave Join Date: Oct 2007 Location: Scumrise, Flooriduh Posts: 5,181	My x-ray t2 and with a different shell\rims on:

08-27-2009, 01:39 PM	#78
stuboy Newbie Join Date: Aug 2009 Location: stoke on trent Posts: 1	hpi pro 4 hpi t drift lock front and rear diffs brm 19t motor acoms 2.4 ghz tamiya ta03f pro drifter 27t stock motor

10-07-2009, 10:15 PM	#79
S.I.C Newbie Join Date: Oct 2009 Location: Dublin, Ca Posts: 29	Here's my micro rs4 drifter...

10-23-2009, 03:39 PM	#80
Destroyah Newbie Join Date: Jan 2008 Location: SanDiego Posts: 13	Coppermix and SC10 TT01 w/sport tuned 540motor (tow hooks f/r, intercooler, tail pipe, time attack style wheels w/drift tires) SC10: twin pipes and clip cables.....nothing too in depth

RCCrawler Forums

Thread: RCC's official DRiFT pic archive!