xmod EVO help

[mini freak]

i have had this xmod EVO for about 2 years and i got the awd kit with the car, i took the awd kit out and i lost the shafts, i found one but it is too short, my xmod is a the xmod evolution series nissian gt-r . all i know is that the medium shaft is 84mm long. i want to know what are the lengths of the three shafts.

also, im having a problem with my steering, it jitters in nuetral position and when turning, how do i fix this prolem or should i find some losi micro-t electronics and rig a micro servo to it . or could i even hook a micro servo to the stock electronic board

[benoj]

regarding your steering gittering, are you still running only 4 AAAs or have you upgraded to 5-6 AAAs/li-ion/lipo? if you increase the voltage the gittering is normal. you may be able to hook a micro servo up to the stock pcb, since all you would need to do is lengthen the 3 wires from the pot and the 2 from the motor

[mini freak]

yes im still running the 4 AAA, let me get this straight, remove the micro servo board, lenghten the two wires on the motor and lengthen the 3 pot wires and just put them were the stock 5 wires go

[benoj]

it should work but it also can depend on the potentiometer resistance difference between them