RCCrawler Forums

ttrmike · 08-20-2005, 01:18 AM

Quote:

Originally Posted by TwistedCreations

BTW guys, here is my new sweetheart

I still want to see you do this: http://www.endlesswinters.org/mpg/SuzukiGSX-R1300.wmv

TwistedCreations · 08-20-2005, 07:32 AM

nice, but something is screwy there.. i don't see him hitting 80mph in 1st gear. as soon as he was taking off, he was already doing 10-20... either that or he has it geared like a mofo.

my 1st gear only hits like 40 and then i have to hit 2nd.

syco133 · 08-20-2005, 08:30 AM

That bike is geared like a mofo.I saw that on the guy that built the bikes website its a hyabusa 1300r that is turbo charged and intercooled.put out something like 400 horses to the rear wheel

silvr_tung_devl · 08-20-2005, 04:11 PM

Thats just OUTRAGEOUS!!!!!!!

That was easily 250 mph.....speedo was maxxed out and tach was still climbing!!!!!

crawlerready · 08-20-2005, 05:12 PM

gahhhhhhhhh, i so want to make it out there but theres no way in hell. couple people pmed me and told me they lived near me so maybe i can crawl with them. ill try and make it there one day i really want to crawl with you guys.

thefordmccord · 08-20-2005, 08:42 PM

Well, I'm not going to be able to make it tomorrow. I have a family reunion to go to and it is hard to pass up the good food!! I hope you all have fun!

TwistedCreations · 08-20-2005, 09:53 PM

i dont feel like going and searching through 4 pages of crap.... did we pick a time when its gonna start? I gotta cruise to KY. in the morning, so i'll just swing on by on my way back home.. i'll try to bring the camera, but we shall see :?

AdamF · 08-20-2005, 09:54 PM

I'd say around 10 like last time. I'll be there a little before.

Grape Ape !!! · 08-20-2005, 10:31 PM

OK I will be out bout 10:30 due to meeting 3 other guys that are coming, for breakfast at 9 at IHOP We will be as close as possible but we are going to charge up some batts then. I will be out asap then.....TXT wont make it due to linkage problems(too long and wrong) tlt is done hummer will come along with pajero and possibly an emaxx.

TwistedCreations · 08-20-2005, 10:32 PM

Alrighty then, I'll get there when i get there

Adam- you have PM and have one of these too

AdamF · 08-20-2005, 10:34 PM

I'm charging batts right now as we speak. Putting the finishing touches on the clod as well. Steering still sucks, but it runs.

silvr_tung_devl · 08-21-2005, 05:31 AM

BTW Adam...I found a couple of clod parts lingering around the garage......i'm bringing to ya....I have no use for 'em.....

JasonInAugusta · 08-21-2005, 11:29 AM

Quote:

Originally Posted by TwistedCreations

nice, but something is screwy there.. i don't see him hitting 80mph in 1st gear. as soon as he was taking off, he was already doing 10-20... either that or he has it geared like a mofo.

my 1st gear only hits like 40 and then i have to hit 2nd.

He's got at least twice the bike you do...

2 x 40 = 80

TwistedCreations · 08-21-2005, 01:37 PM

wow, you can mulitply

well next time we have a GTG, i'll try to bring a truck next time and stay longer

Cory missed a good time though... owell, that's just too bad

EeePee · 08-21-2005, 04:13 PM

Rub it in why don't ya!?

I need pictures!

Shafties ruled again? What the hell is that crap!?

AdamF · 08-21-2005, 04:13 PM

I had a good time guys. I actually wheeled the clod without breaking anything major. A few screws came loose and a solder joint came loose, that was it. Oh wait, there is something wrong, there is a lot of wobble in the front end. I'll have to check that out later. Oh and I think I stripped out a hex in my rear axle, but that was pulling my 18 month old nephew around on his little ride along 4wheeler!

I'm working on the video, might have it posted here shortly, or later on tonight.

Cory, I don't think anyone actually took any pictures. I took a little bit of video though.

TwistedCreations · 08-21-2005, 07:09 PM

Quote:

Originally Posted by EeePee

Rub it in why don't ya!?

I need pictures!

Shafties ruled again? What the hell is that crap!?

HAHA!!.. just wait til Kris posts up here

as for the shafty thing, that was Kevins' idea since there was only 1 clod at the meet

I don't think there are any pics, just adams little bit of video me and him shot. I rode the bike out and didn't take anything with me. Kevin has a nice battery pack setup on his front axle though

AdamF · 08-21-2005, 10:59 PM

http://www.rccrawler.com/forum/showt...121#post138121

Yea, shafties ruled, only by majority though!

silvr_tung_devl · 08-22-2005, 06:07 AM

SHAFTIES RULE!!!!!CLODS DRUEL!!!!!SHAFTIES RULE!!!!!CLODS DRUEL!!!!!
Even IF it was by majority!!!!

Cory......you shoulda threw some Moabs on a wheelchair and joined us!!!!
Sorry no pics.....I couldn't wheel and shoot pics at the same time!!!!!
We are already talking about another next month!!!!!

old_dog · 08-22-2005, 06:29 AM

Adam,
Thanks once again for hosting this get together. Had a great time again and met several great new people, it was well worth the drive.
Cory,
Guy took several pictures of my truck which included the new battery set up. If he doesn't post them I will have my digital camera back over Labor Day week and and will send you some pictures.

08-20-2005, 07:32 AM	#82
TwistedCreations Colt Python/SR9c Join Date: Feb 2004 Location: out in the shop, reloading ammo! Posts: 8,626	nice, but something is screwy there.. i don't see him hitting 80mph in 1st gear. as soon as he was taking off, he was already doing 10-20... either that or he has it geared like a mofo. my 1st gear only hits like 40 and then i have to hit 2nd.

08-20-2005, 08:30 AM	#83
syco133 RCC Addict Join Date: Jan 2005 Location: Green River Kentucky Posts: 1,067	That bike is geared like a mofo.I saw that on the guy that built the bikes website its a hyabusa 1300r that is turbo charged and intercooled.put out something like 400 horses to the rear wheel

08-20-2005, 04:11 PM	#84
silvr_tung_devl Quarry Creeper Join Date: Feb 2005 Location: Indy-Westside Posts: 306	Thats just OUTRAGEOUS!!!!!!! That was easily 250 mph.....speedo was maxxed out and tach was still climbing!!!!!

08-20-2005, 05:12 PM	#85
crawlerready Rock Stacker Join Date: Jul 2005 Location: richmond Posts: 59	gahhhhhhhhh, i so want to make it out there but theres no way in hell. couple people pmed me and told me they lived near me so maybe i can crawl with them. ill try and make it there one day i really want to crawl with you guys.

08-20-2005, 08:42 PM	#86
thefordmccord Quarry Creeper Join Date: Jan 2005 Location: Carlisle, KY Posts: 327	Well, I'm not going to be able to make it tomorrow. I have a family reunion to go to and it is hard to pass up the good food!! I hope you all have fun!

08-20-2005, 09:53 PM	#87
TwistedCreations Colt Python/SR9c Join Date: Feb 2004 Location: out in the shop, reloading ammo! Posts: 8,626	i dont feel like going and searching through 4 pages of crap.... did we pick a time when its gonna start? I gotta cruise to KY. in the morning, so i'll just swing on by on my way back home.. i'll try to bring the camera, but we shall see :?

08-20-2005, 09:54 PM	#88
AdamF RCC Addict Join Date: Apr 2004 Location: Cincinnati Ohio Posts: 1,673	I'd say around 10 like last time. I'll be there a little before.

08-20-2005, 10:31 PM	#89
Grape Ape !!! I joined the Band! Join Date: Aug 2005 Location: Cincinnati Posts: 48	OK I will be out bout 10:30 due to meeting 3 other guys that are coming, for breakfast at 9 at IHOP We will be as close as possible but we are going to charge up some batts then. I will be out asap then.....TXT wont make it due to linkage problems(too long and wrong) tlt is done hummer will come along with pajero and possibly an emaxx.

08-20-2005, 10:32 PM	#90
TwistedCreations Colt Python/SR9c Join Date: Feb 2004 Location: out in the shop, reloading ammo! Posts: 8,626	Alrighty then, I'll get there when i get there Adam- you have PM and have one of these too

08-20-2005, 10:34 PM	#91
AdamF RCC Addict Join Date: Apr 2004 Location: Cincinnati Ohio Posts: 1,673	I'm charging batts right now as we speak. Putting the finishing touches on the clod as well. Steering still sucks, but it runs.

Sponsored Links

08-21-2005, 05:31 AM	#92
silvr_tung_devl Quarry Creeper Join Date: Feb 2005 Location: Indy-Westside Posts: 306	BTW Adam...I found a couple of clod parts lingering around the garage......i'm bringing to ya....I have no use for 'em.....

08-21-2005, 01:37 PM	#94
TwistedCreations Colt Python/SR9c Join Date: Feb 2004 Location: out in the shop, reloading ammo! Posts: 8,626	wow, you can mulitply well next time we have a GTG, i'll try to bring a truck next time and stay longer Cory missed a good time though... owell, that's just too bad

08-21-2005, 04:13 PM	#95
EeePee MODERATOR™ Join Date: Jul 2004 Location: Ohio Posts: 18,928	Rub it in why don't ya!? I need pictures! Shafties ruled again? What the hell is that crap!?

08-21-2005, 10:59 PM	#98
AdamF RCC Addict Join Date: Apr 2004 Location: Cincinnati Ohio Posts: 1,673	http://www.rccrawler.com/forum/showt...121#post138121 Yea, shafties ruled, only by majority though!

08-22-2005, 06:07 AM	#99
silvr_tung_devl Quarry Creeper Join Date: Feb 2005 Location: Indy-Westside Posts: 306	SHAFTIES RULE!!!!!CLODS DRUEL!!!!!SHAFTIES RULE!!!!!CLODS DRUEL!!!!! Even IF it was by majority!!!! Cory......you shoulda threw some Moabs on a wheelchair and joined us!!!! Sorry no pics.....I couldn't wheel and shoot pics at the same time!!!!! We are already talking about another next month!!!!!

08-22-2005, 06:29 AM	#100
old_dog Pebble Pounder Join Date: Oct 2004 Location: Indianapolis Posts: 182	Adam, Thanks once again for hosting this get together. Had a great time again and met several great new people, it was well worth the drive. Cory, Guy took several pictures of my truck which included the new battery set up. If he doesn't post them I will have my digital camera back over Labor Day week and and will send you some pictures.

RCCrawler Forums

Thread: (OHIO) T.S.R.C.R.C. August 21st ( Shafties ruled again :) )