Where to find a rubber snorkel for 1/8 NB JK Brute

[alexchen86]

So I trashed the idea of using the typical scx10 chassis in favor of GCM's Cross Canyon front mounted motor and t-case setup to keep my NB JK interior intact. Also that and I've built about 6 scx10 rigs by now!

I will be chopping out the second row seats and doors and moving the tail right behind the front can for the NB JK Brute I'm building.

Then of course squadron putty, styrene, plastistruct, primer, and kits of sanding.

Gonna take a lot of work so I'm gathering as many parts immediately as possible.

I've see. Rc4wd having a 1/10 TJ Wrangler snorkel but I don't think the curves will work and I don't want to use a heat gun to make it work as it looks a little unproportional to the larger NB JK 1/8 14" wheelbase body.

Anyone can help me please?

[humve]

When I did the snorkel on my axial honcho I used a piece of brake line. Then I put a whole in the body and hot glued it on the inside and used a piece of very soft foam for the filter.

[pardonmyn00b]

S.snorkle + Fender + mirror | Safari Snorkle for Jeep JK 1/8 | RCmodelex - specialized for RC rock crawling, trial and expeditions