09-09-2013, 06:00 PM | #1 |
Rock Crawler Join Date: Jan 2013 Location: Middleburg Florida
Posts: 920
| Slash into rally car?
Ok I have a seriously modified slash, it has the aluminum LCG plate chassis, 5200kv motor, MMP esc and nice shocks. I don't need another truck and I want to make this into a rally car. Granted it won't be a standard issue rally car. I want to put drift tires on it and have fun that way too. Any recommendations on this? I can post pics of what I have if there is any interest in what exactly I am working with. Wheelbase is about 12.3" and overall outside tire width is barely under 11" Thanks! Last edited by Exocaged; 09-09-2013 at 06:20 PM. |
Sponsored Links | |
09-09-2013, 07:01 PM | #2 |
Gettin’ back on the horse Join Date: Feb 2006 Location: Hoonsville
Posts: 6,671
| Re: Slash into rally car?
Thats the exact same thing the Traxxas "10th scale Rally" is anyway. Kills the look and what rally is to me, but it is very feasible to do. However if you want to help the look you can also swap the A-arms out and use a Kyosho DRX body, it really, really helps with the scale proportions and makes it look 100% better then going with one of the Traxxas "10th scale rally" bodies. FYI if left stock the wheelbase scales out to about 7th scale and the width about 6th scale. If a DRX bodies is used it makes the dimensions closer to all being the same scale around, 7.4th scale. |
09-09-2013, 07:23 PM | #3 |
Rock Crawler Join Date: Jan 2013 Location: Middleburg Florida
Posts: 920
| Re: Slash into rally car?
With the chassis being aluminum I can cut and reweld it if its absolutely necessary plus I should be able to shorten the driveshaft to match. What A-arms can I use to narrow it up? One thing I am wanting is to use a General Lee body on it. I just haven't found a 1/10 scale one yet. I'm not really concerned with perfect scale really, just a fun car. |
09-09-2013, 07:45 PM | #4 |
Pebble Pounder Join Date: May 2013 Location: Lees Summit
Posts: 139
| Re: Slash into rally car?
Don't think you can narrow it enough to get even close to fitting under a 1/10th dodge charger body. If you're dead set on wanting to use the slash, start cutting and hacking away...then you can buy a chassis that fits properly once you've destroyed the slash and made it unusable. I've seen far too many people try things like that only to end up so frustrated that they sell off what they can and leave the hobby entirely. Just my opinion for what it's worth.
|
09-09-2013, 08:26 PM | #6 | |
Gettin’ back on the horse Join Date: Feb 2006 Location: Hoonsville
Posts: 6,671
| Re: Slash into rally car? Quote:
Whether they make a General Lee in the size you need I have no idea. | |
09-09-2013, 08:29 PM | #7 |
Gettin’ back on the horse Join Date: Feb 2006 Location: Hoonsville
Posts: 6,671
| Re: Slash into rally car? |
09-10-2013, 04:35 AM | #8 | |
Rock Crawler Join Date: Jan 2013 Location: Middleburg Florida
Posts: 920
| Re: Slash into rally car? Quote: Chrisshooting, I'm not finding any 1/10 dodge charger bodies, only 1/18 stuff. And I'm not going anywhere. Last edited by Exocaged; 09-10-2013 at 05:29 AM. | |
09-10-2013, 06:55 AM | #9 |
Pebble Pounder Join Date: May 2013 Location: Lees Summit
Posts: 139
| Re: Slash into rally car?
Then look at the 69 charger body from HPI for the T/E Maxx. Wheelbase will be close (not perfect) though I don't think you can narrow the slash to fit the wheels inside the wheel wells. If you can make it work, please put up a build thread. I would love to see how it's done....if it can be.
|
09-10-2013, 10:07 AM | #10 |
Rock Crawler Join Date: Jan 2013 Location: Middleburg Florida
Posts: 920
| Re: Slash into rally car?
Yeah I have an emaxx and that length would work. I'll check into that. Thanks!
|
Slash into rally car? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New Traxxas Rally: 1/16th Rally Car | Szczerba | Chit Chat | 20 | 10-05-2010 10:26 PM |
Rally car? | Major Bummer | Rally | 12 | 06-04-2009 03:22 PM |
| |