batteries for my new Bully!

[The Black Nasty]

Hey guys, i come from nitro and have no idea what i should do about batteries for my new bully build. Lets get some suggestions for what i should use in my rig and some links to them and a good charger : )

[Mr Glassman]

What ESC are you running? That's your starting point!

[romulus22]

3 cell
http://www.hobbycity.com/hobbyking/s...idProduct=9608

2 cell
http://www.hobbycity.com/hobbyking/s...0C_Lipoly_Pack

as far as as charger goes this is what i have and i really like mine
http://www.rpphobby.com/product_p/rcesc2000.htm

[Kraqa]

check my bully motor thread. its full of diferent types of bats and run times with what motors.

[Mudsy]

[QUOTE=romulus22;2424284]3 cell
http://www.hobbycity.com/hobbyking/s...idProduct=9608

That's a nice one. I shall look into that one. Thanks for the link. I am starting to collect parts for my new bully built.

[The Black Nasty]

its an Outcry dual motor ESC with BEC.

[GEARSCIENCE]

Originally Posted by romulus22

3 cell
http://www.hobbycity.com/hobbyking/s...idProduct=9608

2 cell
http://www.hobbycity.com/hobbyking/s...0C_Lipoly_Pack

as far as as charger goes this is what i have and i really like mine
http://www.rpphobby.com/product_p/rcesc2000.htm

What kind of run times do you get on that 3s? I've been using holmes hobbies 1300 packs but the wiring seems to have been done by a 3 yr old so I gotta resolder the balancing lines all the time. Def looking for another affordable option thanks man

[romulus22]

i haven't used it that much cause both of my trucks are programmed for 2s right now. and even when i do run my batteries i only use 1 pack per course. so i never look to see how long one pack runs for. i know on my axial i use anywhere from 150-250mah to complete 1 course. i have messed around with the bully quite a bit on the rhino 1050mah 2s and it runs for a good 20 min or so. so i would guess close to that. i never time them

[Boids]

Originally Posted by Kraqa

check my bully motor thread. its full of diferent types of bats and run times with what motors.

is it in the bully or electronic section , can't seem to find it or i'm looking right passed it.

[romulus22]

Bully motor Thread

[Boids]

thank you time to read it

[UPSman]

I have the same esc, which comes with the rtr, and i run a 2200mah 30c 3s lipo in mine... Make sure you get a lipo cutoff though, because it doesn't have one.

[GEARSCIENCE]

Originally Posted by romulus22

i haven't used it that much cause both of my trucks are programmed for 2s right now. and even when i do run my batteries i only use 1 pack per course. so i never look to see how long one pack runs for. i know on my axial i use anywhere from 150-250mah to complete 1 course. i have messed around with the bully quite a bit on the rhino 1050mah 2s and it runs for a good 20 min or so. so i would guess close to that. i never time them

Thanks man for that price it's worth finding out for myself right lol