|
| LinkBack | Thread Tools | Display Modes |
09-01-2016, 07:58 PM | #1 |
Pebble Pounder Join Date: May 2016 Location: Warwick
Posts: 187
| 1st Comp Rig - Bully RTR
First off thanks to RC4WD for putting out a product that gets those on the fence about getting into these crawlers an option that isn't horribly costly or time consuming. And also a thanks to all of the knowledgeable people in this forum along with the ECRCC crew that have given great advice to a newcomer! Here is my rig from start until now and there is plenty more in the works for the fun of it and the hopes to complete a comp course haha Pics soon after getting the rig but cleaned up the wires but there were still a ton of wires: Then I went to a local ECRCC comp after painting some panels, changing the esc for a cheap hobbywing which worked better than the outcry, cut some pins, added rc4wd extenders and mounted shocks/links on what others did on RCC. Oh heh and cleaned up wires again: Then I got home after not completing any courses but was happy enough with my true first runs other than climbing children's toys. I learned a ton more and will be getting back to work on it. Started by adding the 2nd hobbywing esc to run dual on the cheap to learn and hacking my GT3C which was fun. I also painted the side panels now. Installed CI foams (DD6comp cut softnarrow front - DD5.5med narrow rear) and installed promodeler 420oz servo. Also cleaned up some wires again and placed my steering link on top of the knuckles. I'm waiting on a castle bec and 2661 shocks with losi springs and dlux standoffs plus no preload retainers..... Think that's all for the moment. Sent from my HTC One_M8 using Tapatalk |
Sponsored Links | |
09-01-2016, 08:06 PM | #2 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: 1st Comp Rig - Bully RTR
Sweet the Promodeler servo really makes a difference ! HANG UP AND DRIVE ! |
09-01-2016, 08:38 PM | #3 |
Newbie Join Date: Aug 2016 Location: Keizer
Posts: 3
| Re: 1st Comp Rig - Bully RTR
Thats pretty awesome man, I like all that carbon fiber on there!
|
09-01-2016, 09:10 PM | #4 |
I wanna be Dave Join Date: Dec 2006 Location: here
Posts: 3,042
| Re: 1st Comp Rig - Bully RTR
QUOTE.. started by adding the 2nd hobbywing esc to run dual on the cheap to learn and hacking my GT3C which was fun. QUOTE Add more info and pics possibly a run video with/On the dual ESC set up. |
09-01-2016, 09:14 PM | #5 | ||
Pebble Pounder Join Date: May 2016 Location: Warwick
Posts: 187
| Re: 1st Comp Rig - Bully RTR Quote:
Quote:
Sent from my HTC One_M8 using Tapatalk | ||
09-01-2016, 09:23 PM | #6 | |
Pebble Pounder Join Date: May 2016 Location: Warwick
Posts: 187
| Re: 1st Comp Rig - Bully RTR Quote:
Sent from my HTC One_M8 using Tapatalk | |
09-01-2016, 09:38 PM | #7 |
I wanna be Dave Join Date: Dec 2006 Location: here
Posts: 3,042
| Re: 1st Comp Rig - Bully RTR
Try running rear dragbake only... think I might have mentioned this in another thread.
|
09-01-2016, 09:56 PM | #8 | |
Pebble Pounder Join Date: May 2016 Location: Warwick
Posts: 187
| Re: 1st Comp Rig - Bully RTR Quote:
Sent from my HTC One_M8 using Tapatalk | |
09-02-2016, 07:16 AM | #9 |
Pebble Pounder Join Date: May 2016 Location: Warwick
Posts: 187
| Re: 1st Comp Rig - Bully RTR Thanks, planned on airbrushing but it didn't work so used what I had lying around. Might be in need of a few decals, thinking about it but might just keep it simple. Decisions, decisions, decisions..... Sent from my HTC One_M8 using Tapatalk |
09-02-2016, 01:53 PM | #10 |
Rock Crawler Join Date: Dec 2010 Location: Ct.
Posts: 644
| Re: 1st Comp Rig - Bully RTR
The additions you have made to the rig over the past week will make a big difference and then some nice shocks and you'll be in good shape! Great to meet you last week, keep going to comps and you'll be amazed at how much you learn and how much better your driving will be. I still learn something at every comp I attend!! Thanks again for taking pics last week, they look awesome especially the ones of my truck!! |
09-02-2016, 06:19 PM | #11 | |
Quarry Creeper Join Date: May 2012 Location: enfield CT
Posts: 240
| Re: 1st Comp Rig - Bully RTR Quote:
| |
09-10-2016, 12:05 PM | #12 |
Pebble Pounder Join Date: May 2016 Location: Warwick
Posts: 187
| Re: 1st Comp Rig - Bully RTR
Ok so I've done a couple more updates and took it out for a spin this morning and it feels like it has improved and the dual esc is a really nice feature even with them falling into the cheaper variety. Here are a few pics of the updates and my mess of a workstation: Had to modify Barry's batt/electronics tray Out with the stocks and in with the big bores What a mess! Cap modded the front shocks Used DLUX no preload retainers all around and his shock ends on the rear Cut down the chassis a bit. Sent from my HTC One_M8 using Tapatalk Last edited by THX_138; 10-16-2016 at 02:12 PM. |
09-10-2016, 02:30 PM | #13 |
I wanna be Dave Join Date: Apr 2015 Location: Roseville, Ca
Posts: 2,506
| Re: 1st Comp Rig - Bully RTR
Lookin good! Should notice a big difference in performance. What weight oil did you start with?
|
09-10-2016, 04:43 PM | #14 |
Pebble Pounder Join Date: May 2016 Location: Warwick
Posts: 187
| Re: 1st Comp Rig - Bully RTR |
09-10-2016, 05:29 PM | #15 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: 1st Comp Rig - Bully RTR
Orange or pink springs? HANG UP AND DRIVE ! |
09-10-2016, 05:31 PM | #16 |
Pebble Pounder Join Date: May 2016 Location: Warwick
Posts: 187
| Re: 1st Comp Rig - Bully RTR |
09-10-2016, 06:08 PM | #17 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: 1st Comp Rig - Bully RTR
That's what I chose, and was curious. Mine arrive Monday. HANG UP AND DRIVE ! |
09-10-2016, 06:22 PM | #18 | |
Pebble Pounder Join Date: May 2016 Location: Warwick
Posts: 187
| Re: 1st Comp Rig - Bully RTR Quote:
Sent from my HTC One_M8 using Tapatalk | |
09-13-2016, 03:33 PM | #19 |
RCC Addict Join Date: Nov 2011 Location: Surrey,BC- Canada
Posts: 1,663
| Re: 1st Comp Rig - Bully RTR
Nice build you got going here, you might want to invest in some knuckle weights. This will help out a lot.
|
09-13-2016, 03:46 PM | #20 | |
Pebble Pounder Join Date: May 2016 Location: Warwick
Posts: 187
| Re: 1st Comp Rig - Bully RTR Quote:
Sent from my HTC One_M8 using Tapatalk | |
| |