RCCrawler Forums
Page 22 of 39 « First 121718192021 22 232425262732 Last »
Show 40 post(s) from this thread on one page

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Superclass Crawlers (http://www.rccrawler.com/forum/superclass-crawlers/)
-   -   Ivory (http://www.rccrawler.com/forum/superclass-crawlers/222126-ivory.html)

Gear Jammer 12-20-2011 10:29 PM
Re: Ivory
 
Quote:
Originally Posted by JeremyH (Post 3449057)
Nahh....this truck still isnt even running....the electronics are sitting in a pile waiting for me to wire them up. I've been quite busy lately, so not much progress has been made...

IIRC, there is a 10t pinion out there...I might need to try to find it.
Here's a 10T pinion:10 Tooth 48 Pitch Hardened Steel Pinion Gear
I'm not sure if they'd work for you; just figured I'd see if I could find one."thumbsup"

JeremyH 12-21-2011 07:26 AM
Re: Ivory
 
Thanks for the heads up GJ. These bergs run off 0.6mod gears....10T pinions are a bit tough to find, but I had a local hook me up with some. "thumbsup"

JeremyH 12-21-2011 07:26 AM
Re: Ivory
 
Quote:
Originally Posted by scatterbrains (Post 3459276)
WTF? you going for the longest super thread award??

HEHEHEHE
Is the prize a cookie? If so, then YES!:ror:

Gear Jammer 12-21-2011 07:40 AM
Re: Ivory
 
I completely forgot about Berg gears being 0.6mod. Glad you got ahold of some and I can't wait to see some vids when you get it wired back up!:twisted:

JeremyH 12-21-2011 07:50 AM
Re: Ivory
 
Well, hopefully the wiring will be finished this week. My family is out of town (I have to work through the rest of the week), so my evenings will be less hectic than usual.

BentMetaL 12-21-2011 09:57 AM
Re: Ivory
 
If the bergs are 48 pitch, RC4WD has 10 tooth pinions

JeremyH 12-21-2011 09:59 AM
Re: Ivory
 
They are 0.6mod. "thumbsup"

krawlfreak 12-21-2011 10:22 AM
Re: Ivory
 
Quote:
Originally Posted by JeremyH (Post 3449057)
Nahh....this truck still isnt even running....the electronics are sitting in a pile waiting for me to wire them up. I've been quite busy lately, so not much progress has been made...

IIRC, there is a 10t pinion out there...I might need to try to find it.
Quote:
Originally Posted by Erik D_lux (Post 3449031)
I am going to give 3s a go. I have no idea how it will do though. I thought you might have tried them, gave up and went to 4s.

I do wish there was a tiny pinion avail though. I would think a 9,10t pinion would be great.
there are 10 tooth pinions available but i have broke at least 7 of them...

JeremyH 12-21-2011 10:26 AM
Re: Ivory
 
Damn....that's not good to hear. Yeah, I was told not to overtighten them.

So, what pinions do you run in your super Jeremy?

krawlfreak 12-21-2011 10:31 AM
Re: Ivory
 
Quote:
Originally Posted by JeremyH (Post 3460021)
Damn....that's not good to hear. Yeah, I was told not to overtighten them.

So, what pinions do you run in your super Jeremy?
the stock 12's

you could volt up but i will be the first to tell ya, i was breaking the strongest parts on the market regularly with that voltage.

i drive like an animal though:ror:

CREEPERBOB 12-21-2011 10:35 AM
Re: Ivory
 
What is the gear ratio of the berg gearboxes? As in 65:1 for the super Bully's.

JeremyH 12-21-2011 10:42 AM
Re: Ivory
 
Quote:
Originally Posted by krawlfreak (Post 3460033)
the stock 12's

you could volt up but i will be the first to tell ya, i was breaking the strongest parts on the market regularly with that voltage.

i drive like an animal though:ror:
Yeah, I actually stepped down to 3S (from 4S on my bullys) for that exact reason. I think I put the 12 in the back and 13 in the front of mine. I just need a bit of time to drive it and see how it feels.

JeremyH 12-21-2011 10:45 AM
Re: Ivory
 
Quote:
Originally Posted by CREEPERBOB (Post 3460046)
What is the gear ratio of the berg gearboxes? As in 65:1 for the super Bully's.
I am not exactly sure....it isnt as low as the 65:1 but it isnt as high as the 38:1...

TURBOFEST 12-21-2011 11:33 AM
Re: Ivory
 
Quote:
Originally Posted by JeremyH (Post 3460062)
I am not exactly sure....it isnt as low as the 65:1 but it isnt as high as the 38:1...
Bergs are 36.67:1 with a 12t pinion

JeremyH 12-21-2011 11:36 AM
Re: Ivory
 
Good to know. Thanks TF! "thumbsup"

TURBOFEST 12-21-2011 11:37 AM
Re: Ivory
 
Anytime man.

You get those White things I sent you??

CREEPERBOB 12-21-2011 11:41 AM
Re: Ivory
 
Quote:
Originally Posted by TURBOFEST (Post 3460140)
Bergs are 36.67:1 with a 12t pinion

Wow , thats suprises me.

JeremyH 12-21-2011 11:59 AM
Re: Ivory
 
Quote:
Originally Posted by TURBOFEST (Post 3460147)
Anytime man.

You get those White things I sent you??
I sure did and thank you VERY much! Sorry that I didnt message you about receiving them....it slipped my mind. "thumbsup"

JeremyH 12-29-2011 04:29 AM
Re: Ivory
 
I have had a few folks message me about the length of my links, so I thought I'd post them here:

Link Measurements (eye to eye)
Front Uppers = 6.25"
Front Lowers = 6.5"
Rear Uppers = 6 5/8"
Rear Lowers = 7.25"

CREEPERBOB 12-29-2011 09:46 AM
Re: Ivory
 
Those Berg guys are sure damn demanding :evil: :lmao:.


Quote:
Originally Posted by JeremyH (Post 3473900)
I have had a few folks message me about the length of my links, so I thought I'd post them here:

Link Measurements (eye to eye)
Front Uppers = 6.25"
Front Lowers = 6.5"
Rear Uppers = 6 5/8"
Rear Lowers = 7.25"


All times are GMT -6. The time now is 10:55 AM.
Page 22 of 39 « First 121718192021 22 232425262732 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com