Dani's Chaotic SuperSpecial Pro Berg

[53 willys]

Sweet set up dani!! Nice work..

[nicodrive01]

Originally Posted by eXtremeCostumez

Awesome Dani ! You make me want to build a super ,too ..

Thanks Felix, good to hear, Germany needs more Super drivers

Originally Posted by EverettY

That isn't a little bit of CF that's a lot of CF and I can't say it's to much CF You can never have to much CF IMO

Word!

Originally Posted by 53 willys

Sweet set up dani!! Nice work..

Thanks, Mark. Have a break now and spending my Weekend with Manu and two more friends in Norway at the Crawler Nordics2012. Just 2.2 Pro, no Super

[nicodrive01]

just a small step, some "paperwork" for getting the skin templates. Just did and sent to Krawler Konceptz; can't await the skinz





was very busy the past 2 weeks and awaiting parts from allover the world, pretty sure next week the things are going on...

[winkscrawler]

Looking good Dani. I wish my super rebuild was going as well as yours. Not much time here either.

[EverettY]

Nice! BTW are those motors in the background the ones that are going in this build?

[nicodrive01]

Originally Posted by EverettY

Nice! BTW are those motors in the background the ones that are going in this build?

Yes, those are Brood Apo 45T HHK. I guess enough power for a lightweight Super.

[JeremyH]

Originally Posted by nicodrive01

Yes, those are Brood Apo 45T HHK. I guess enough power for a lightweight Super.

That should be perfect! I run 45T Creep HHKs in my super and it is my fastest crawler and has PLENTY of torque.

[nicodrive01]

Originally Posted by JeremyH

That should be perfect! I run 45T Creep HHKs in my super and it is my fastest crawler and has PLENTY of torque.

thanks Jeremy. What pinions are you running with the Creeps?

[JeremyH]

12/11

[ittybitty]

Originally Posted by nicodrive01

Yes, those are Brood Apo 45T HHK. I guess enough power for a lightweight Super.

That's what I'm running in mine...great motors

[nicodrive01]

Originally Posted by JeremyH

12/11

Thanks, gonna start like that

Originally Posted by ittybitty

That's what I'm running in mine...great motors

good to hear that, Ryan, thanks

[Erik D_lux]

Originally Posted by JeremyH

12/11

Where can I find an 11t pinion?

[EGRESSor]

Originally Posted by Erik D_lux

Where can I find an 11t pinion?

About RW Racing!

RW Racing 0.6 Module Steel Pinions 9T - 30T - Freeprawn Racing

[nicodrive01]

Originally Posted by EGRESSor

About RW Racing!

RW Racing 0.6 Module Steel Pinions 9T - 30T - Freeprawn Racing

exactly! Thanks Christian. What about my Knuckles for the Super, paypal is ready

[4xFord]

Be cautious about those pinions, they can and will break.

[nicodrive01]

Originally Posted by 4xFord

Be cautious about those pinions, they can and will break.

Do you have an option ? RR?

[4xFord]

Enroute makes 11 tooth pinions that are a better design. The RW pinions set screw goes through the pinion teeth, unlike the better design where they go through a collar type deal.

I broke one on my 2.2 rear berg motor at Vanquish Co comp in 2010. That sucked. Also broke one in my super and know others that have been through a few. Just a friendly warning.

[nicodrive01]

Originally Posted by 4xFord

Enroute makes 11 tooth pinions that are a better design. The RW pinions set screw goes through the pinion teeth, unlike the better design where they go through a collar type deal.

I broke one on my 2.2 rear berg motor at Vanquish Co comp in 2010. That sucked. Also broke one in my super and know others that have been through a few. Just a friendly warning.

Thanks Shelby; gonna start with some Robinson 12/12.

Hell yeah, today the postman rings twice and brought me some small plastic bags from Salt Lake City:





That was fast; 5 days from overseas, not bad at all, Erik. Thanks for this support!

So I started to disassemble my axles and prepared a little helper for milling and grinding the gear cases a bit more...





I'll mill them down later today and just unpacked all the fine D-Lux stuff:

got some upper link mounts:

old one:




and the new ones:




make some more pix later on, can't wait to do work now

[winkscrawler]

Awesome. What do the tubes weigh? I so wanted to go that route but I am on a real tight budget right now. Looking really good.

[Erik D_lux]

Is it done yet