02-13-2009, 09:45 AM | #121 |
Newbie Join Date: Sep 2007 Location: Canada
Posts: 39
|
Add'd some ST Racing Concepts " Bling " |
Sponsored Links | |
02-15-2009, 09:15 PM | #122 |
Rock Stacker Join Date: Dec 2008 Location: Eagle Mountain
Posts: 50
| Work in progress
Well here it is - I think that I am going to end up spending a lot of time (and money) upgrading this rig (don't tell my wife) Futaba 3PM 2.4 Ghz ESC: Mtroniks Viper Marine 20 It is 2WS for now but I will be converting it to 4WS soon Everything else is stock for now.... It isn't as dark as it shows in this picture - although it went a little darker then I planned. |
02-15-2009, 11:42 PM | #123 |
Rock Stacker Join Date: Sep 2008 Location: Ewa Beach, HI
Posts: 76
|
Specs: CR-01 Novak Goat SC Brushless Motor 18.5 Losi Shocks Proline Hammers tires and Memory Foam 4WS - JR servos DX3R Spektrum Last edited by Vtown Crawl; 04-07-2009 at 12:15 AM. |
02-16-2009, 09:43 PM | #124 |
Newbie Join Date: Nov 2008 Location: New Zealand
Posts: 1
|
Heres my new CR01. Purchased the Land Cruiser at a rather cheap price. The body is still away getting painted, should have that back next week and then ill fit the LED light kit to it. So far, i have done away with the cantilevers (were limiting my articulation too much and didnt like the slack in them). Still running factory shocks and springs for now. Running a crappy futuba servo, which is WAAAY to weak for this purpose, so i have a traxxas waterproof high torque on its way. My CR01 still in completely stock form, with cantilevers, posing after it drove over my old TT01. The old articulation limit... just starting to lift off rear tire. And the new one... (all tires still touching) And the new issue, which will lead to me getting coilovers... Last edited by KwS; 02-16-2009 at 09:45 PM. |
02-24-2009, 07:13 AM | #125 |
Rock Stacker Join Date: Mar 2008 Location: socal rock garden
Posts: 80
| Jk cr-01 Here's mine with a new bright body and KHAN chassis |
02-28-2009, 01:21 PM | #126 |
Newbie Join Date: Jun 2008 Location: Montreal
Posts: 7
| Hey guys what do you think of my recycled cheminy foundation?
from this To that!!! Sorry for the picture quality, my wife took the camera with her! |
03-05-2009, 02:03 PM | #127 |
Newbie Join Date: Feb 2009 Location: Affligem [BE]
Posts: 17
|
* Novak Goat with 55t |
03-05-2009, 07:45 PM | #128 |
Newbie Join Date: Jan 2009 Location: Western Australia
Posts: 30
|
CR-01 from down under! JunFac goodies .. HPI 45T .. Sidewinder .. Rock Claws .. Pro-line F100 body. |
03-15-2009, 02:21 AM | #129 |
Rock Stacker Join Date: Feb 2009 Location: Australia
Posts: 49
|
My CR-01 Tamiya ESC Standard motor Last edited by lewy; 03-22-2009 at 03:59 AM. |
03-15-2009, 02:57 PM | #130 |
Newbie Join Date: Dec 2007 Location: Germany
Posts: 15
| Installed several Hop-Ups from Proline and other scale parts, made a rudimentary cockpit, Driver was named "Legolas" before ;). Greetings, Michael |
03-21-2009, 08:17 PM | #131 |
Newbie Join Date: Jan 2009 Location: Brampton, Ontario
Posts: 42
| Cr01 fj
I know many people have issues with 3Racing, but it is easy for me to get these parts over other manufacturers. I've am waiting for 1.9 Pyhtons and Rock Crushers from RC4WD... Hope you like. This truck is probably my most favorite rig just because of all the time I spent wrenching on it. But don't get me wrong, my AX10 Alpha Male is still the Alpha Male in the collection. 3Racing parts (aluminums, leds, winch, li-po) out the wazoo, Tekin FX-R & 55T combo, Spektrum SR3001 rx, Integy F-350 wheels, Tamiya Rock Cruiser tires, HiTec 645MG servo, and Nikko FJ Cruiser body with added lightbar off another Nikko body. Last edited by IRON MAN; 03-22-2009 at 10:53 AM. |
03-23-2009, 06:21 PM | #132 |
Quarry Creeper Join Date: Sep 2008 Location: South Glens Falls
Posts: 214
| First Day out
Well this was our first day out on the rocks. Finally enough snow melted. She got a bit scuffed up but who cares, we had a blast!
|
03-27-2009, 01:01 AM | #133 |
Pebble Pounder Join Date: Mar 2009 Location: Las Vegas
Posts: 134
|
Hi, first post This is my first R/C since I was a youngin' and I've never been into trucks, just those cheap german boxes This isht is a blast though! Mine is box stock, save for the Tamiya alum servo mount up front. Has a 2400 something-something battery, HiTec Aggressor radio, Traxxas waterproof hi-torque servo and a Novak Goat. Also made a water resistant craft case to hold the electronics. Last edited by CJ318; 06-10-2010 at 04:33 AM. |
03-27-2009, 09:26 PM | #134 |
Newbie Join Date: Mar 2009 Location: Moe Valley
Posts: 14
| My first Crawler.....
Freshly Stock just 1 test run.... Spectrum 3000 tamiya 101 bk cheap futaba servo |
04-02-2009, 04:37 AM | #135 |
Pebble Pounder Join Date: Oct 2008 Location: Prague, Czech Republic
Posts: 118
| Last edited by carlos46; 04-07-2009 at 05:38 AM. |
04-10-2009, 06:28 PM | #136 |
Newbie Join Date: Mar 2009 Location: Belgium
Posts: 9
| Chevy CR-01 Hello i'm from belgium and this is my tamiya crawler i first wanted to make a scale monstertruck of it but crawling is much more fun The servo is a Hitec HS-5955TG so thats OK but the speed control and motor are dynamite tazer 12T and the stock motor. Cam somebody tell me whats the best to install for better power (novak goat ? integy55t with the dynamite speedcontrol , novak rooster?) every comment is welcome thx
|
04-17-2009, 06:34 PM | #137 |
Pebble Pounder Join Date: Jul 2007 Location: Deland, Fl.
Posts: 110
| Grumpy's wrangler
Just finished. Going on the "bay" Last edited by Grumpy; 04-17-2009 at 06:41 PM. |
04-23-2009, 12:20 AM | #138 |
Newbie Join Date: Nov 2008 Location: East Bay, CA
Posts: 3
| |
04-28-2009, 10:15 PM | #139 |
Rock Stacker Join Date: Mar 2009 Location: bellingham
Posts: 73
|
heres mine i need to get a new body without cut up fenders... and the scale goodies |
04-29-2009, 08:10 AM | #140 |
Newbie Join Date: Apr 2009 Location: Doha
Posts: 27
| Hi Guys!Newbie here from Doha, Qatar
I would like to share my ride... Last edited by akapmar; 05-03-2009 at 11:28 AM. |
Tamiya CR-01 Picture Archive - No talking - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Redcat Picture Archive - No talking | EeePee | Redcat Crawlers | 404 | 02-08-2024 06:23 PM |
Axial AX-10 Picture archive - No talking | jason | Axial AX-10 Scorpion | 1456 | 08-19-2023 09:13 PM |
1.5 scale picture archive - No talking | 1BadJeepBruiser | 1.5 Scale Rigs | 358 | 07-04-2023 03:22 PM |
SCX10 Picture Archive - No talking | BENDER | Axial SCX-10 | 3332 | 06-04-2023 05:40 PM |
Wraith Picture Archive - No talking | Harley | Axial Wraith | 1586 | 03-22-2023 11:32 AM |
| |