RCCrawler Forums

|maniac| · 09-28-2008, 06:06 PM

Thats sick!

Love the little crawler...

51WillysJeep · 09-28-2008, 06:23 PM

Awesome job on the interior for your "First" time at it..!! . Your dashboard is Spot on..! I'm also lovin' the mini Ax10 tuber you made as well !! You've got one sick lookin' CR-01..! Congrats

Jeephead · 09-29-2008, 10:27 AM

That is totally amazing!! Never tried messing with Styrene, well done! Attention to detail is great. Any tips with working with styrene..if that is what it is?
-Zack
o|||||o

srcars · 09-29-2008, 01:10 PM

Quote:

Never tried messing with Styrene, well done! Attention to detail is great. Any tips with working with styrene..if that is what it is?

Trail and error

I am fairly new to it myself but I must say its not really that hard. I brought a good selection of profiles and then just sat with a set of needle files some super glue and plastic weld.

I found loads of hints/tips and ideas going through this and other forums.

Give it a go it is very rewarding.

cyberdog · 09-29-2008, 02:46 PM

I also built my own interior recently for my CR01 and its comming along. A few more details and then i am done for the time beeing

srcars · 09-29-2008, 03:02 PM

Quote:

I also built my own interior recently for my CR01 and its comming along. A few more details and then i am done for the time beeing :smile:

Cool, Any pics, would be really good to compare how you went about it ?

cyberdog · 09-30-2008, 02:46 AM

Here are the 2 latest pics but have some more in my thread HERE

srcars · 10-01-2008, 02:17 AM

Sorry Cyberdog I had seen you post post (memory) Looks cool will look smart with the roll cage on, you gotta get on and finish it now

Do you have any experiance of sticking Lexan to styrene ?

cyberdog · 10-01-2008, 02:35 AM

Will do the rollcage as soon as i get my thumb out

Have been planning to do it for a long time but hasnt been done yet. No experience with sticking lexan to styrene but guess ca glue could work.

Steve182 · 10-01-2008, 08:27 AM

I love the fuel tubing shift knobs

srcars · 10-06-2008, 08:38 AM

Done a few finishing touches. Couple more things to try before mini Rc is fitted in the back and its done.
I removed the rear bumper and fitted an ally job. The lights were then mounted out of harms way on the body (may do indicators later) Also made an exhaust.

Up front I fitted a working winch, the motor in fitted in the rear and the 'rope' runs along a tube under the chassis to the front, All the lights are wired up and everything is operated by a seperate tv type remote, Its a bit unconventional but it was cheap and it gives me 8 chanels to play with.

Jeephead · 10-09-2008, 08:12 PM

I can only hope to detail my tub as well. Not sure when I am going to start. Waiting for some other parts and time.

Gordkoff · 10-31-2008, 10:10 AM

I know i can not hope too get anything close too that... awesome work...

carlos46 · 05-12-2009, 02:24 AM

Hi,
your Yota is fantastic. It's inspiration for me. We're you buy the driver? He's great

lewy · 05-12-2009, 03:55 AM

That interior is awesome.

Given me some ideas for when I start mine.

T-buck · 05-12-2009, 10:51 PM

Very nice & Talking me into getting a CR-01.

srcars · 05-13-2009, 01:06 PM

Wow this is an old thread, but the good news is this car is still one of my favorites and has proved to be completley relaible despite having quite a few battle scars

here is a couple of its latest outings

http://www.youtube.com/watch?v=U6ygU...e=channel_page

http://www.youtube.com/watch?v=hCaIY...eature=channel

Anybody thinking about getting a CR-01 I would say go for it

09-30-2008, 02:46 AM	#27
cyberdog Quarry Creeper Join Date: Jul 2008 Location: SWEDEN Posts: 301	Here are the 2 latest pics but have some more in my thread HERE Last edited by cyberdog; 09-30-2008 at 02:49 AM.

10-09-2008, 08:12 PM	#32
Jeephead Quarry Creeper Join Date: Sep 2008 Location: South Glens Falls Posts: 214	Just received CR-01 I can only hope to detail my tub as well. Not sure when I am going to start. Waiting for some other parts and time.

09-28-2008, 06:06 PM	#21
\|maniac\| Newbie Join Date: Dec 2007 Location: Chicago Posts: 32	Thats sick! Love the little crawler...

09-28-2008, 06:23 PM	#22
51WillysJeep RCC Addict Join Date: Nov 2007 Location: Massachusetts Posts: 1,184	Awesome job on the interior for your "First" time at it..!! . Your dashboard is Spot on..! I'm also lovin' the mini Ax10 tuber you made as well !! You've got one sick lookin' CR-01..! Congrats

09-29-2008, 10:27 AM	#23
Jeephead Quarry Creeper Join Date: Sep 2008 Location: South Glens Falls Posts: 214	That is totally amazing!! Never tried messing with Styrene, well done! Attention to detail is great. Any tips with working with styrene..if that is what it is? -Zack o\|\|\|\|\|o

09-29-2008, 02:46 PM	#25
cyberdog Quarry Creeper Join Date: Jul 2008 Location: SWEDEN Posts: 301	I also built my own interior recently for my CR01 and its comming along. A few more details and then i am done for the time beeing

10-01-2008, 02:17 AM	#28
srcars Newbie Join Date: May 2008 Location: Dorset U.K. Posts: 21	Sorry Cyberdog I had seen you post post (memory) Looks cool will look smart with the roll cage on, you gotta get on and finish it now Do you have any experiance of sticking Lexan to styrene ?

10-01-2008, 02:35 AM	#29
cyberdog Quarry Creeper Join Date: Jul 2008 Location: SWEDEN Posts: 301	Will do the rollcage as soon as i get my thumb out Have been planning to do it for a long time but hasnt been done yet. No experience with sticking lexan to styrene but guess ca glue could work.

10-01-2008, 08:27 AM	#30
Steve182 Rock Stacker Join Date: Sep 2008 Location: Connecticut Posts: 94	I love the fuel tubing shift knobs

10-06-2008, 08:38 AM	#31
srcars Newbie Join Date: May 2008 Location: Dorset U.K. Posts: 21	Done a few finishing touches. Couple more things to try before mini Rc is fitted in the back and its done. I removed the rear bumper and fitted an ally job. The lights were then mounted out of harms way on the body (may do indicators later) Also made an exhaust. Up front I fitted a working winch, the motor in fitted in the rear and the 'rope' runs along a tube under the chassis to the front, All the lights are wired up and everything is operated by a seperate tv type remote, Its a bit unconventional but it was cheap and it gives me 8 chanels to play with.

10-31-2008, 10:10 AM	#33
Gordkoff Newbie Join Date: Sep 2007 Location: Canada Posts: 39	I know i can not hope too get anything close too that... awesome work...

05-12-2009, 02:24 AM	#34
carlos46 Pebble Pounder Join Date: Oct 2008 Location: Prague, Czech Republic Posts: 118	Hi, your Yota is fantastic. It's inspiration for me. We're you buy the driver? He's great

Sponsored Links

05-12-2009, 03:55 AM	#35
lewy Rock Stacker Join Date: Feb 2009 Location: Australia Posts: 49	That interior is awesome. Given me some ideas for when I start mine.

05-12-2009, 10:51 PM	#36
T-buck Rock Crawler Join Date: Feb 2009 Location: Milwaukee Posts: 609	Very nice & Talking me into getting a CR-01.

05-13-2009, 01:06 PM	#37
srcars Newbie Join Date: May 2008 Location: Dorset U.K. Posts: 21	Wow this is an old thread, but the good news is this car is still one of my favorites and has proved to be completley relaible despite having quite a few battle scars here is a couple of its latest outings http://www.youtube.com/watch?v=U6ygU...e=channel_page http://www.youtube.com/watch?v=hCaIY...eature=channel Anybody thinking about getting a CR-01 I would say go for it

RCCrawler Forums

Thread: Custom Interior for my CR-01