Awesome CC-01 Trailer Hitch

[HDMM]

OK, figured I'd share my latest creation / experiment with everyone.

I've been looking to put a decent hitch on one of my CC-01 rigs and apparently there really isn't anything decent out there and I didn't want something that was obviously home made looking. I also wanted it to be strong as I will actually use it to a trailer.

What I ended up using is a RC4WD hitch that I had just removed from my Ascender. The hitch is part # Z-S1596 and the adjustable ball munt is part # Z-S1095

Basically I just took it apart, did some measuring and lining up of stuff, marked a couple holes on the chassis and drilled them out for mounting bolts. I used the hitch side plates along with some 6mm spacers and through bolted them to the CC-01 chassis with some BH screws, backed up with some flat washers and locknuts inside the chassis.

Theend result is this thing looks like it was made for the CC-01, it is good looking and strong. Also, with the ball mount removed, the hitch doesn't hang down enough to really get caught up on stuff.

So, anyone looking to add a decent hitch to their CC-01, I think think this is a good way to go.