03-27-2014, 08:52 AM | #1 |
Quarry Creeper Join Date: Nov 2008 Location: morristown
Posts: 375
| brushless sistem
I have a lcc my novax goat 3s just craped out on me. I was running there 18.5 motor with 12t also. what is a good system to get. that will get me close to what I was running.
|
Sponsored Links | |
03-27-2014, 11:11 AM | #2 |
Pebble Pounder Join Date: Oct 2012 Location: Plattsmouth
Posts: 184
| Re: brushless sistem
Tekin RS system or either Tekin RS and a Tekin ROC motor or Castle MMP and tekin motor or Holmes motor! IMO!!
|
03-27-2014, 01:03 PM | #3 |
Quarry Creeper Join Date: Nov 2008 Location: morristown
Posts: 375
| Re: brushless sistem
ok so I am going to get a mmp what turn motor should I get will be running on 2s also
Last edited by heminutt; 03-27-2014 at 01:29 PM. |
03-27-2014, 04:40 PM | #4 |
Rock Crawler Join Date: Sep 2011 Location: Richfield
Posts: 737
| Re: brushless sistem
I would keep the 18.5 and 12T pinion Go to a MMP and run 3 or 4S |
03-27-2014, 04:51 PM | #5 |
Pebble Pounder Join Date: Oct 2012 Location: Plattsmouth
Posts: 184
| Re: brushless sistem
Your 18.5 should be fine on. 2s but might need to try a few pinions to get it where you like it! Or you could run 3s like GiJoe said!
|
03-27-2014, 07:10 PM | #6 |
RCC Addict Join Date: Dec 2011 Location: Australia Queensland!
Posts: 1,086
| Re: brushless sistem
4s 13.5t . But 13.5T on 2s goes good.
|
03-27-2014, 07:45 PM | #7 |
Quarry Creeper Join Date: Nov 2008 Location: morristown
Posts: 375
| Re: brushless sistem
Ok just ordered the mmp and a 3s
|
03-27-2014, 11:31 PM | #8 |
Quarry Creeper Join Date: Dec 2013 Location: San Diego county
Posts: 261
|
I'm 18.5 and 3s on mmp and a 20t pinion, works good
|
03-28-2014, 07:09 AM | #9 |
Rock Crawler Join Date: Oct 2009 Location: Knoxville
Posts: 626
| Re: brushless sistem In an Night Crawler, totally agree. In an LCC, 15T pinion max. Of course, depending on driveline efficiency. Speaking from not having tried a 13.5T, I think it's better to have a higher turn motor with more juice (3s-4s). It IS a larger battery you have to deal with, but it works out to be more RPMs while retaining the torque of the higher turn motor, longer runtimes, cooler electronics, and on and on. The MMP is a great ESC that allows amazing adjustability, as well as being stout enough to be able to experiment with battery size (3s, 4s - IMO 5 and 6s will just be insanity). |
03-28-2014, 09:37 AM | #10 |
Quarry Creeper Join Date: Dec 2013 Location: San Diego county
Posts: 261
|
Sounds like its time for a lnc tranny and a flip! I completely agree with the higher turn motor, I'm getting about 20-25min runtime on a 850 mah
|
03-31-2014, 11:42 AM | #11 |
Quarry Creeper Join Date: Nov 2008 Location: morristown
Posts: 375
| Re: brushless sistem
Ok got the mmp today I have never set one up I got the link for it also what do most of you set it at
|
03-31-2014, 12:32 PM | #12 |
Quarry Creeper Join Date: Dec 2013 Location: San Diego county
Posts: 261
|
Il check my settings later when I get home Sent from my Lumia Icon using Tapatalk |
04-05-2014, 08:23 PM | #13 |
Quarry Creeper Join Date: Nov 2008 Location: morristown
Posts: 375
| Re: brushless sistem
Did you ever get to check your settings
|
| |