Go Back   RCCrawler Forums > RCCrawler General Tech > Tires and Wheels
Loading

Notices

Thread: A couple quick questions about glue to cut n shut.

Reply
 
LinkBack Thread Tools Display Modes
Old 09-14-2014, 03:26 PM   #1
Newbie
 
Join Date: Dec 2007
Location: Sacramento
Posts: 28
Default A couple quick questions about glue to cut n shut.

Hey Everyone, I did a search but didn't come up with my answer. I'm about to attempt my first cut and shut job and am ordering the glue. How many tires will a 1 oz. bottle of CA glue together? I'm just curious if I need to order more than one bottle. I'm working on building a tall/narrowed set of HB Rovers (because I have some extras...).

Also, I see a lot of reference to the IC-2000 glue as well as using some other products to get the tire tacked together first. Any input to a good quick glue to get started would also be helpful.

Thanks,

Dustin
Rocknut is offline   Reply With Quote
Sponsored Links
Old 09-14-2014, 11:33 PM   #2
Quarry Creeper
 
Join Date: Nov 2012
Location: Blue Ridge
Posts: 332
Default Re: A couple quick questions about glue to cut n shut.

I cut n shut my 2.2 sedonas and i started with a 2oz bottle of ZAP medium ca glue and used under a half a bottle. Been goin for over a year now
BigSid00 is offline   Reply With Quote
Old 09-15-2014, 12:24 AM   #3
Newbie
 
Join Date: Dec 2007
Location: Sacramento
Posts: 28
Default Re: A couple quick questions about glue to cut n shut.

Quote:
Originally Posted by BigSid00 View Post
I cut n shut my 2.2 sedonas and i started with a 2oz bottle of ZAP medium ca glue and used under a half a bottle. Been goin for over a year now
Thanks for the reply! I didn't want to run out but at $10 an ounce for that IC-2000 stuff I don't want to over buy either...
Rocknut is offline   Reply With Quote
Old 09-15-2014, 09:19 PM   #4
RCC Addict
 
AddictedtoRC1's Avatar
 
Join Date: Apr 2012
Location: Williamsport, PA
Posts: 1,360
Default Re: A couple quick questions about glue to cut n shut.



Been using it on all my cut and shuts.
AddictedtoRC1 is offline   Reply With Quote
Old 09-16-2014, 10:40 AM   #5
psn
Pebble Pounder
 
Join Date: Oct 2004
Location: Central NJ
Posts: 136
Default Re: A couple quick questions about glue to cut n shut.

If I may add...

Wear a respirator or at the very least keep your face to the side (not over the work) during the procedure. The fumes wreak havoc on the nasal membranes and can give a two day long runny nose and burnt hair smell.

If you can smell the glue a lot you are probably too close.
psn is offline   Reply With Quote
Old 09-16-2014, 10:45 AM   #6
E.Y. Designs
 
Join Date: Sep 2011
Location: Springfield, OR
Posts: 3,591
Default Re: A couple quick questions about glue to cut n shut.

If you smell glue a lot than you are probably using too much glue which will than make your gluing harder cause it'll take longer to dry... I can usually do about 15 sets of tires with 1 bottle of glue... You won't need more than 1 bottle for sure


Sent from my iPod touch using Tapatalk
EverettY is offline   Reply With Quote
Old 09-16-2014, 08:40 PM   #7
Newbie
 
Join Date: Dec 2007
Location: Sacramento
Posts: 28
Default Re: A couple quick questions about glue to cut n shut.

Quote:
Originally Posted by AddictedtoRC1 View Post


Been using it on all my cut and shuts.
Thanks for the lead, it's nice to know that I don't need the crazy stuff!

Quote:
Originally Posted by psn View Post
If I may add...

Wear a respirator or at the very least keep your face to the side (not over the work) during the procedure. The fumes wreak havoc on the nasal membranes and can give a two day long runny nose and burnt hair smell.

If you can smell the glue a lot you are probably too close.
Thank you! Good advise.

Quote:
Originally Posted by EverettY View Post
If you smell glue a lot than you are probably using too much glue which will than make your gluing harder cause it'll take longer to dry... I can usually do about 15 sets of tires with 1 bottle of glue... You won't need more than 1 bottle for sure


Sent from my iPod touch using Tapatalk
I wish I had seen your sales thread before I ordered a bunch of tires. I hope mine come out half as nice as yours. I need to get on your wait list for a set of narrowed voodoos.
Rocknut is offline   Reply With Quote
Reply



A couple quick questions about glue to cut n shut. - Similar Threads
Thread Thread Starter Forum Replies Last Post
Cut and shut questions Dezertdirt Tires and Wheels 2 06-16-2014 06:20 PM
Panther Cobra Cut 'n Shut questions monkeyracer Tires and Wheels 23 09-17-2009 06:49 AM
Just a quick couple of questions Stoney0102 Newbie General 5 01-25-2007 02:15 PM
flame away.. but where & what glue for cut&shut? badhoopty Tires and Wheels 19 06-10-2005 11:34 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 07:05 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com