Has anyone got this set?

[madmax22]

I bought these 2 years ago and they have been holding up PERFECT. Not 1 broken tip. If your looking to start a set, i would start with these sizes at least. I really like these driver though.

http://www.amainhobbies.com/product_...-15-20-25-30mm

[wouldrichest]

Originally Posted by dave56bug

I've broken Integy, and Axial tips, 1.5mm is just a thin piece of metal no matter how its made.

that set you linked seems kinda expensive, but thats a lot of tools, remember with these if you do break a tip, just order a new tip from Losi or AE or whatever hardneded ti nitride high quality tip you can get, they are reasonably priced.

Integy tools suck as bad as thier other parts, I've broke two .05" tips UNscrewing LNC beadlock screws, a third on a pinion with very little pressure, a 1.5mm also snapped pretty easy and the 5/64th doesn't fit VP beadlocks very well. I've spent enough on replacement tools at this point to have just got quality tools in the first place.

__________________
watch free movies online

[KNIFE]

I talked to an EDS tool guy hes charging me for a hundred bucks to setup a kit close to integy kit and also comes with tool bag too....

I really want HUDY's but EDS prices are steep enough, HUDY is like snap-on...
Its a tool dammit

Just got my BERG clocker, new welder, new rotary tool, new chargers, batts,
Designated Hobby table. Were having some fun now..
As soon as I get my hand tools, next is my vise so my place is completely setup
with best "all new" so everyone can use here and we can build all sorts of rides.. FREE TO USE
It turned into a helluva cool man cave....it rocks

[TattooKenny]

Originally Posted by KNIFE

so everyone can use here and we can build all sorts of rides.. FREE TO USE

Sweet! When can I come over?

[KNIFE]

HAHAHAHAHA

GOOD ONE, U MUST BE BORED!

[TattooKenny]

Originally Posted by KNIFE

HAHAHAHAHA

GOOD ONE, U MUST BE BORED!

Nope, just haven't talked to ya in a while Are you done with that Berg yet?

[DISTURBIN' tha PEACE]

Originally Posted by KNIFE

I talked to an EDS tool guy hes charging me for a hundred bucks to setup a kit close to integy kit and also comes with tool bag too....

I really want HUDY's but EDS prices are steep enough, HUDY is like snap-on...
Its a tool dammit

Yeah, I'd go with EDS too

[73fordhighboy]

as a mechanic...i use Snap On. the tools that earn my living...work on the toys that make me happy.

[KNIFE]

Originally Posted by TattooKenny

Nope, just haven't talked to ya in a while Are you done with that Berg yet?

HAHAHA GLAD TO HEAR YOU MISSED ME.....I SAW A PICTURE I CAME ACROSS AND IMMEDIATELY THOUGHT OF YOU...SEE IF I CAN FIND..

No Im thinking of building a new couple of parts for Berg axle's.
Anyways no, not even clocked eemm yet.

But RIPPERS parts are in mail, KOH R1 is almost done.

[KNIFE]

Originally Posted by DISTURBIN' tha PEACE

Yeah, I'd go with EDS too

WHOLLY FAWK U KIDDIN

DUDE YOU GOT THE I AINT FN AROUND KIT.....DAAAAAMN
HOW MUCH THAT RUN? SHIZZZZZ

[Skeeno]

That 25 piece EDS kit is $335 with your name on the handles. Seems kinda steep for $12.50 per tool, but they sure are pretty.

http://www.edsracingproductsstore.co...&productId=146

[DISTURBIN' tha PEACE]

Originally Posted by KNIFE

WHOLLY FAWK U KIDDIN

DUDE YOU GOT THE I AINT FN AROUND KIT.....DAAAAAMN
HOW MUCH THAT RUN? SHIZZZZZ

See below, 'round there. Also got the quick release driver set in metric & standard.

Originally Posted by Skeeno

That 25 piece EDS kit is $335 with your name on the handles. Seems kinda steep for $12.50 per tool, but they sure are pretty.

http://www.edsracingproductsstore.co...&productId=146

With as many tools I've been threw in 20+years of RC, I said enough is enough. Had AE, integy, & others, all crap. Get something good that will last.