Re: What RC parts have you 3D Printed???? sweeeeet, thanks for the help! sorry again for hijacking the thread! Sent from my iPhone using Tapatalk |
Re: What RC parts have you 3D Printed???? Quote:
No problem, Cura also has a preview function, after slicing you can watch the extruder follow the path, layer by layers Sorta boring, but can show an issue if something doesn’t print properly, you can see if it’s the file or the printer screwing up. Hang up and Drive |
Re: What RC parts have you 3D Printed???? thanks to everyone who helped, it was that i hadn't sliced, cura is works great! appreciate the feedback and solving my issue! Sent from my iPhone using Tapatalk |
Re: What RC parts have you 3D Printed???? Quote:
https://r.tapatalk.com/shareLink/top...ink_source=app Aluminum flatbed trailer Sent from my SM-G970U using Tapatalk |
Re: What RC parts have you 3D Printed???? Quote:
Ernie |
Re: What RC parts have you 3D Printed???? Quote:
|
Re: What RC parts have you 3D Printed???? Hood latches is the smallest I have ever printed... https://imagizer.imageshack.com/v2/1...922/KUj9k8.jpg |
Re: What RC parts have you 3D Printed???? some beadlocks https://uploads.tapatalk-cdn.com/202...e8478203c8.jpg https://uploads.tapatalk-cdn.com/202...37c0a16172.jpg https://uploads.tapatalk-cdn.com/202...1120e9de98.jpg Sent from my iPhone using Tapatalk |
Re: What RC parts have you 3D Printed???? Quote:
|
Re: What RC parts have you 3D Printed???? Quote:
I'm just finishing a build that the body, everything on it as well as skid plates and such are all 3d printed. FYI not all PLA is the same. Some is strong enough some is not. No version pla thays dark colored deals with being in the sun during the summer though. Here's the project I have going, well finishing up now. First attempt at something this big. Have more planned now.https://uploads.tapatalk-cdn.com/202...7f78228f8f.jpghttps://uploads.tapatalk-cdn.com/202...b05cb953c6.jpghttps://uploads.tapatalk-cdn.com/202...cc3beb2ea2.jpg Sent from my SM-S906U using Tapatalk |
Re: What RC parts have you 3D Printed???? I've 3D printed these portal axles+transfer case <iframe width="560" height="315" src="https://www.youtube.com/embed/R3UPPfrg49k" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe> Plus mudguards, bedsides,fake engine... |
Re: What RC parts have you 3D Printed???? Quote:
Sent from my ONEPLUS A6013 using Tapatalk |
Re: What RC parts have you 3D Printed???? Quote:
Thanks! The video above your reply is the evolution of this first axle... Went all in! If you are curious, please check my Unimog build.. http://www.rccrawler.com/forum/multi...portals-5.html |
Re: What RC parts have you 3D Printed???? 1 Attachment(s) Saw something like this a long time ago and can't find it anymore. These are for Traxxas 4962 big bore shocks I use on an Axial Wraith. Tired of losing spring retainers so copied the idea and created these locking spring retainers. Uses a 2mm screw and nut to clamp to the rod end. Even if the spring retainer pops off the rod end, the screw keeps it from falling off the shock shaft. Haven't designed any for other shocks yet but editing a few dimensions should make it easy to adapt the design to most shocks. |
All times are GMT -6. The time now is 08:10 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com