RCCrawler Forums

TwistedXT · 04-01-2009, 10:46 AM

Post pictures only in this section... mods (if any)
No chit chat

Culetto · 04-01-2009, 03:06 PM

Mine is back to stock at the moment just to bash around. Two 7 cell 4000mah packs. The bumpers were relocated to be closer to the Helios body and the stock radio was replaced by Nomadio.

All photo credits go to Dieselfuel :thumbsup:

Egnix · 05-03-2009, 09:44 AM

Here's mine:

gunatrytocrawl · 05-04-2009, 04:52 PM

]

heres mine!:-P

ninjashadow · 05-13-2009, 09:07 PM

i am not new here i just forgot my super old account bu anyways here is my summit i got a week ago

jamison31 · 05-17-2009, 10:18 PM

heres mine right out of the box and then the body painted. I`ve got losi 4600mah 7 cells.

heminutt · 06-18-2009, 10:25 AM

here's mine

TwistedXT · 10-22-2009, 10:50 AM

Summit!
Jumbo Kongs!
Custom Tire Chains!
Fresh Snow!

J4c03 · 10-23-2009, 04:27 PM

Stock besides tires and body. Running maxxamps 6500mah lipos

Nasty350LT1 · 11-26-2009, 02:09 PM

Here is my "Super Summit"

I just finished converting my Summit to a Kershaw Designs Dual Revolver 700 HO Motor setup.
I installed a cooling fan on the ESC, I did all the "Kershaw Design Mods" to my Summit including
the "Summit Center Dog Bone Kit" the "Summit Heavy Duty Slipper Spring Kit", the
"Summit Suspension Arm Extension Kit" and I decided to rebuild the shocks
with 50WT oil. Now, believe me it "FLY's" ... 30 MPH with a 20t pinion for now.
It "Wheelies" from the front or the back on demand, now.
I use a pair of "7.4V 9000mAh 2 Cell 28C Sport-Max LiPo Battery Pack w/ Deans Connectors"
and I get almost 60 minutes of run time. Also, installed a thermal switch, on the ESC Fan. It's still "Waterproof"
Now, all I need is some 14mm hubs adapters to fit my SUMMIT with the Jumbo Kongs.

himo · 12-14-2009, 03:58 AM

T I N Y · 01-05-2010, 05:47 PM

Here's mine....Just playin' in the fresh snow....

NO GHOST HUNTERS THOSE AREN'T ORBS.....LOL

Broken Summit · 01-06-2010, 06:58 PM

http://i793.photobucket.com/albums/y...summit/005.jpg

Broken Summit · 01-06-2010, 07:01 PM

Broken Summit · 01-06-2010, 07:07 PM

durwank · 03-10-2010, 07:35 PM

Here's mine.

TheDude530 · 03-13-2010, 04:51 PM

RPM Front A-arms, new tires, metal geared steering servo and a bronco body.

fiveo · 05-16-2010, 07:08 AM

Aluminum Turnbuckle and Push Rods
Proline Moab's with stock foam inserts
Axial Narrow Beadlocks (Weighted on inside)
HPI Rubicon Body - Gloss Black
Proline Scale Accessories
Weighted front end (two fishing weights zipped tied to the body mounts to keep the front end down)

Greg Dangerfield · 06-02-2010, 08:17 PM

http://www.youtube.com/watch?v=kNjVBDN7kQY

jaymann · 06-06-2010, 06:48 PM

Summit with crushers

04-01-2009, 10:46 AM	#1
TwistedXT Powered by Awesome Join Date: Sep 2004 Location: Parker, Colorado Posts: 3,622	Traxxas Summit Picture Gallery Post pictures only in this section... mods (if any) No chit chat Attached Images

04-01-2009, 03:06 PM	#2
Culetto RCC Addict Join Date: Jul 2008 Location: Sin City Posts: 1,332	Mine is back to stock at the moment just to bash around. Two 7 cell 4000mah packs. The bumpers were relocated to be closer to the Helios body and the stock radio was replaced by Nomadio. All photo credits go to Dieselfuel :thumbsup: Last edited by Culetto; 04-01-2009 at 03:09 PM.

10-22-2009, 10:50 AM	#8
TwistedXT Powered by Awesome Join Date: Sep 2004 Location: Parker, Colorado Posts: 3,622	Summit! Jumbo Kongs! Custom Tire Chains! Fresh Snow! Attached Images

01-06-2010, 06:58 PM	#13
Broken Summit Newbie Join Date: Jan 2010 Location: wallops island Posts: 3	my summit http://i793.photobucket.com/albums/y...summit/005.jpg

01-06-2010, 07:01 PM	#14
Broken Summit Newbie Join Date: Jan 2010 Location: wallops island Posts: 3	summit with kershaw designs extension kit Last edited by Broken Summit; 01-06-2010 at 07:06 PM. Reason: pic didnt show up

05-03-2009, 09:44 AM	#3
Egnix Rock Stacker Join Date: Nov 2008 Location: Colorado Springs Posts: 60	Here's mine:

05-04-2009, 04:52 PM	#4
gunatrytocrawl Rock Stacker Join Date: May 2009 Location: LI Posts: 98	] heres mine!:-P

05-13-2009, 09:07 PM	#5
ninjashadow Newbie Join Date: May 2009 Location: orlando Posts: 9	i am not new here i just forgot my super old account bu anyways here is my summit i got a week ago

05-17-2009, 10:18 PM	#6
jamison31 Newbie Join Date: Apr 2009 Location: Clinton Posts: 43	heres mine right out of the box and then the body painted. I`ve got losi 4600mah 7 cells.

06-18-2009, 10:25 AM	#7
heminutt Quarry Creeper Join Date: Nov 2008 Location: morristown Posts: 375	here's mine

10-23-2009, 04:27 PM	#9
J4c03 Rock Stacker Join Date: Jun 2009 Location: olympia Posts: 67	Stock besides tires and body. Running maxxamps 6500mah lipos

11-26-2009, 02:09 PM	#10
Nasty350LT1 Newbie Join Date: Nov 2009 Location: Wappingers Falls Posts: 5	Here is my "Super Summit" I just finished converting my Summit to a Kershaw Designs Dual Revolver 700 HO Motor setup. I installed a cooling fan on the ESC, I did all the "Kershaw Design Mods" to my Summit including the "Summit Center Dog Bone Kit" the "Summit Heavy Duty Slipper Spring Kit", the "Summit Suspension Arm Extension Kit" and I decided to rebuild the shocks with 50WT oil. Now, believe me it "FLY's" ... 30 MPH with a 20t pinion for now. It "Wheelies" from the front or the back on demand, now. I use a pair of "7.4V 9000mAh 2 Cell 28C Sport-Max LiPo Battery Pack w/ Deans Connectors" and I get almost 60 minutes of run time. Also, installed a thermal switch, on the ESC Fan. It's still "Waterproof" Now, all I need is some 14mm hubs adapters to fit my SUMMIT with the Jumbo Kongs.

12-14-2009, 03:58 AM	#11
himo Newbie Join Date: Jan 2008 Location: kagawa japan Posts: 32

01-05-2010, 05:47 PM	#12
T I N Y RCC Addict Join Date: May 2008 Location: Southern,WV Posts: 1,135	Here's mine....Just playin' in the fresh snow.... NO GHOST HUNTERS THOSE AREN'T ORBS.....LOL

01-06-2010, 07:07 PM	#15
Broken Summit Newbie Join Date: Jan 2010 Location: wallops island Posts: 3	action shots

Sponsored Links

06-02-2010, 08:17 PM	#19
Greg Dangerfield Newbie Join Date: Jun 2010 Location: Home Posts: 1	My first post, Summit Vid http://www.youtube.com/watch?v=kNjVBDN7kQY

LinkBacks (?) LinkBack to this Thread: http://www.rccrawler.com/forum/traxxas-crawlers/170569-traxxas-summit-picture-gallery.html
Posted By	For	Type	Date
Traxxas Summit 5610 - Страница 2	This thread	Refback	10-05-2011 04:57 AM

03-10-2010, 07:35 PM	#16
durwank Quarry Creeper Join Date: Mar 2010 Location: Reno, NV Posts: 217	Here's mine.

03-13-2010, 04:51 PM	#17
TheDude530 Pebble Pounder Join Date: Jan 2010 Location: Reno Posts: 106	RPM Front A-arms, new tires, metal geared steering servo and a bronco body.

05-16-2010, 07:08 AM	#18
fiveo Quarry Creeper Join Date: May 2009 Location: The Tarheel State Posts: 216	Aluminum Turnbuckle and Push Rods Proline Moab's with stock foam inserts Axial Narrow Beadlocks (Weighted on inside) HPI Rubicon Body - Gloss Black Proline Scale Accessories Weighted front end (two fishing weights zipped tied to the body mounts to keep the front end down)

06-06-2010, 06:48 PM	#20
jaymann Quarry Creeper Join Date: May 2010 Location: Vic B.C Canada Posts: 290	Summit with crushers Last edited by jaymann; 11-17-2010 at 10:20 PM. Reason: fixed pic

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

RCCrawler Forums

Thread: Traxxas Summit Picture Gallery