|
| LinkBack | Thread Tools | Display Modes |
08-17-2017, 08:25 PM | #21 |
Rock Stacker Join Date: Aug 2017 Location: Lost in
Posts: 52
| Re: Bumper Fitment Options Thread Random D110 bumper I went for on Amazon for $25. Mounted on with the universal L brackets trimmed on one end. Not to sure if this was taken before or after I adjusted the mounting posts to max height. |
Sponsored Links | |
08-19-2017, 02:00 PM | #22 |
Newbie Join Date: Oct 2016 Location: Innsbruck, Austria
Posts: 43
| Re: Bumper Fitment Options Thread
New SSD bumper. I love it: I had to cut a bit the front grille and below the lights to get down the body until the inner fenders fitted with the chasis like with the stock bumper Last edited by Sabre8; 08-19-2017 at 02:51 PM. |
08-19-2017, 02:48 PM | #23 |
Newbie Join Date: May 2013 Location: madera,ca
Posts: 21
| Re: Bumper Fitment Options Thread |
08-19-2017, 02:54 PM | #24 |
Newbie Join Date: Oct 2016 Location: Innsbruck, Austria
Posts: 43
| Re: Bumper Fitment Options Thread |
08-20-2017, 04:25 AM | #25 |
Quarry Creeper Join Date: Feb 2017 Location: frothy river
Posts: 219
| Re: Bumper Fitment Options Thread I like it man, it even has the slot for the winch. I really like my SSD bumper too.. hey did you change the rear bumper yet? I still have my stock one I do like the little alignment holes it has for the body but it looks too plastic.
|
08-20-2017, 08:35 AM | #26 | |
Newbie Join Date: Oct 2016 Location: Innsbruck, Austria
Posts: 43
| Re: Bumper Fitment Options Thread Quote:
I still have the stock rear bumper but a bit lifted(cut the body also some mm) and so far I like it. | |
08-20-2017, 10:45 AM | #27 |
RCC Addict Join Date: Aug 2017 Location: Fredericksburg, VA
Posts: 1,912
| Re: Bumper Fitment Options Thread
Update: Here are some more pics of the Integy front and rear bumpers after the winch was mounted and I installed Hot Racing tow shackle mounts and tow shackles. I also mounted a RC4WD Hi-Lift jack just for fun. One thing that I really like about these bumpers is that they provide more ground clearance/approach angle than the stock bumpers without changing the bumper mounts. Last edited by Inspector86; 08-20-2017 at 10:53 AM. |
08-20-2017, 11:02 AM | #28 | |
Newbie Join Date: Oct 2016 Location: Innsbruck, Austria
Posts: 43
| Re: Bumper Fitment Options Thread Quote:
Looks so MASIVE! | |
08-26-2017, 06:49 PM | #29 | |
Pebble Pounder Join Date: Oct 2016 Location: Philly Area
Posts: 137
| Re: Bumper Fitment Options Thread Quote:
Bought myself a gunmetal version after seeing your post. After seeing it on my truck, I decided black looked better on the Grey body (and their anodized black version seemed a bit 'blingy' for my taste), so I painted it black, and like how the results came out: It's funny, I was just today thinking "the only thing missing is tow shackles" Are these the ones you used? https://www.amainhobbies.com/hot-rac...BoCIpoQAvD_BwE | |
08-26-2017, 09:48 PM | #30 |
RCC Addict Join Date: Aug 2013 Location: Calgary - in the Great White North
Posts: 1,373
| Re: Bumper Fitment Options Thread
Got the same bumper. A coat of black paint may be in the offing as well. |
08-26-2017, 11:46 PM | #31 | |
RCC Addict Join Date: Aug 2017 Location: Fredericksburg, VA
Posts: 1,912
| Re: Bumper Fitment Options Thread Quote:
YES those are the mounts, they just replace those two screws. I just lightly sanded the spacers to adjust the thickness as needed to be able to get the mounts oriented straight. I also have scratched my front bumper so down the line paint may be a fix, in the meantime I covered the lower part of the bumpers with electrical tape to protect them. BTW, I think that black looks great on the grey body and I have plans to paint my bumper once it get too scratched! Last edited by Inspector86; 09-13-2017 at 10:29 PM. | |
08-28-2017, 05:31 AM | #32 |
Pebble Pounder Join Date: Aug 2017 Location: US
Posts: 185
| Re: Bumper Fitment Options Thread
I made my bumpers. Used 1/4" steel rod to simulate tube bumpers. Stainless 1/32" diamond plate. Used touch up gun bluing and hand rubbed with oil for the finish. Sent from my XT1064 using Tapatalk Last edited by sammyha; 08-28-2017 at 05:37 AM. |
08-28-2017, 09:37 AM | #33 |
Rock Stacker Join Date: Feb 2017 Location: Canada
Posts: 52
| Re: Bumper Fitment Options Thread Your bumper is the first I have seen that looks like it actually protects the underside/undercarriage/ 2 front end corners/posts of the lexan body. So many bumpers here but almost all of the leave the poor body exposed to damage on approach angles.
|
08-28-2017, 09:49 AM | #34 |
Pebble Pounder Join Date: Aug 2017 Location: US
Posts: 185
| Re: Bumper Fitment Options Thread
The beauty of custom built. Yes, even the angle back on the front bumper still protects the body while giving a steeper approach if you enter a bit sideways. I believe they are a touch higher too. I have noticed steel vs. plastic is noisier tho... Sounds awful dragging on rocks, hehe Sent from my XT1064 using Tapatalk |
09-03-2017, 10:26 AM | #35 |
Pebble Pounder Join Date: Oct 2016 Location: Philly Area
Posts: 137
| Re: Bumper Fitment Options Thread
In case anyone is wondering, for my bumper I used the following primer: https://shop.advanceautoparts.com/p/...licolor+primer and paint: https://shop.advanceautoparts.com/p/...uplicolor+semi It's got a few scratches after a couple of runs, but nothing a yearly touch up coat won't solve. |
09-03-2017, 04:35 PM | #36 | |
Quarry Creeper Join Date: Feb 2017 Location: frothy river
Posts: 219
| Re: Bumper Fitment Options Thread Quote:
Second, I will go ahead and disagree with you mobgma and exclude my rear SSD bumper mounted in the front of my trx in your list there. It works, it protects the body and ive got it on film too :p It works on my Marauder body as well same fitment, there is no way I'm pushing any rocks with the corner or underside the body the bumper does all the work. Last edited by Mountainsofbeer; 09-03-2017 at 04:41 PM. | |
09-07-2017, 07:42 PM | #37 |
Pebble Pounder Join Date: Dec 2007 Location: Cumming
Posts: 104
| Re: Bumper Fitment Options Thread |
09-07-2017, 09:35 PM | #38 |
RCC Addict Join Date: Aug 2013 Location: Calgary - in the Great White North
Posts: 1,373
| Re: Bumper Fitment Options Thread
They're 1.9 GMade SR02 wheels. Gmade 1.9 SR02 beadlock wheels (Gloss white) (2) |
Bumper Fitment Options Thread - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bumper options for XJ | powder4breakfast | Axial SCX10 II | 45 | 12-27-2016 12:52 PM |
SSD SCX10 Bumper Fitment | OurJK | Vaterra Ascender | 2 | 07-15-2016 12:19 PM |
G6 Bumper options | gcm2006 | Axial SCX-10 | 1 | 01-26-2014 01:56 PM |
Gelande winch bumper fitment? | George014 | Axial SCX-10 | 1 | 08-16-2012 08:37 AM |
Jeep Body fitment comparison thread??? | The Real Dogman | Paint and Body | 0 | 05-02-2010 11:16 AM |
| |