Re: JDm74's Blazer Quote:
|
Re: JDm74's Blazer Anybody got any good scale tire suggestions? I was looking at the RC4wd Iroc's because they are the right diameter and pretty dang scale. Seems a little tough to find a 4.65ish tall tire. |
Re: JDm74's Blazer Quote:
|
Re: JDm74's Blazer 4.65 is scale? that seems HUGE to me, but then i just realized the monster tires they put on these TRX4's and now that seems modest haha looking good so far! great idea on those oem chevy beadlocks! |
Re: JDm74's Blazer Quote:
Really just looking for what people are running on their Broncos because I think the wheel wells are about the same size as the Blazer's. |
Re: JDm74's Blazer Finally got the truck today and wasted no time starting the mods. Servo is installed and HW1080 is installed as well. Waiting on a 3" servo wire extension for the ESC. Surprisingly, the servo lead was plenty long to reach the RX box. Don't mind the bullet connectors, they will be heat shrinked before it is turned on for the first time. https://farm8.staticflickr.com/7894/...70667c2a_b.jpgUntitled by JASON MCKIMMEY, on Flickr Servo required no elongating of holes to fit like I have read on here multiple times. https://farm8.staticflickr.com/7856/...120ef969_b.jpgUntitled by JASON MCKIMMEY, on Flickr So I took my wheels and tires off my Ascender and put them on to see how they look. They are Vanquish KMC's with OE rock beasts. I like the smaller size tire and the tuck on the wheels. I also lowered the suspension down by taking all the preload out of the shocks. Might need to see if I can make a slightly shorter panhard bar to center the axle at ride height. It's not off by much but I can tell and it will bother me forever if I don't fix it. So what do you guys think about the tire size and ride height? I have some RC4wd rally wheels that I am going to run. https://farm8.staticflickr.com/7847/...40c8d821_b.jpgUntitled by JASON MCKIMMEY, on Flickr |
Re: JDm74's Blazer Tire and ride height look fine. It’s a pretty subtle change imo. Sent from my iPhone using Tapatalk |
Re: JDm74's Blazer It looks good. Rally wheels would look perfect. |
Re: JDm74's Blazer I'm curious to see how well those RC4WD wheels sit on the TRX-4 axles in regard to their backspacing and overall stance. I just picked up the orange and white K5 last weekend. I'm in the process of yanking the electronics in favor of the same steering servo as yours, as well as a Mamba X and 2400kv sensored brushless motor. I've got a set of regular size Rock Beasts that I want to run on mine but I like the rally style wheels, so I'm glad someone makes them in a beadlock. I kinda dig the stock tires, but I'm also adding some brass portal covers on all four corners, so I figure the added weight will do the stock foams in. |
Re: JDm74's Blazer I think I nailed it.... https://farm8.staticflickr.com/7877/...265bfaaf_b.jpgUntitled by JASON MCKIMMEY, on Flickr https://farm8.staticflickr.com/7864/...339f6ded_b.jpgUntitled by JASON MCKIMMEY, on Flickr https://farm8.staticflickr.com/7857/...3176f4cc_b.jpgUntitled by JASON MCKIMMEY, on Flickr https://farm8.staticflickr.com/7853/...9cfdb5db_b.jpgUntitled by JASON MCKIMMEY, on Flickr |
Re: JDm74's Blazer Yes, Yes you did nail it! Now I know how mine will look when I get it.[emoji106] |
Re: JDm74's Blazer Rally wheels and OG Rock Beast...NICE!"thumbsup" Looks great! |
Re: JDm74's Blazer Quote:
|
Re: JDm74's Blazer +1 the wheels look great. |
Re: JDm74's Blazer Yup, you nailed it alright. The 4.5 tires look perfect in relation to the wheel wells. Nice update! |
Re: JDm74's Blazer Took it out for its maiden voyage and stripped the stock servo horn in about 20 minutes. I can already tell it is more capable than anything I have mostly because of the ground clearance of the portals. I was very surprised where it went with open diffs. On to the pics. https://live.staticflickr.com/7899/3...61e14e35_b.jpgUntitled by JASON MCKIMMEY, on Flickr Carnage: https://live.staticflickr.com/7849/4...0787a2f5_b.jpgUntitled by JASON MCKIMMEY, on Flickr The factory metal arm that comes with the sport kit is actually kinda hard to find in stock right now. I managed to find it on Ebay. The Al horn that came with the servo has 2 positions neither of which line up with the stock horn. |
Re: JDm74's Blazer Metal servo arm installed today. Waiting on rain to go away for testing. |
Re: JDm74's Blazer Quote:
|
Re: JDm74's Blazer Looks GREAT!!!! I seriously love the RC4WD wheels. Keep in mind that Traxxas now sells optional springs for the GTS shocks which allows you to play with spring rates and really dial in the suspension to your driving style and terrain. |
Re: JDm74's Blazer Looks like a tooth on the servo is all bent? Truck looks good. Not sure how the RC4WD center caps mount but definitely wondering if the ones from the stock wheels fit onto them? That would look killer. |
All times are GMT -6. The time now is 06:03 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com