Steve's VS410 Phoenix Build

[Steven McKay]

Originally Posted by indybama

Oooh, look at that! That looks great steve. How much weight did it throw towards the back?

Thanks. Too much, but it didn't sink the shocks as much as I thought. It being my first I thought what the hell something different. The design was for a working tailgate with actual latches much like a 1:1. I was even thinking about one like this, but then I realized it wouldn't survive roll overs. I should have changed the design but I didn't, I could make the same tailgate with very little added weight. These first three builds will give me the experience needed (hopefully) to build a competition level crawler, just don't know what class to do yet. I have no desire to compete I would like to build the best crawler I can. I think I like building more than crawling, but that is fun too. Just need to find some places with good rock around here.

Originally Posted by B-MOW71

Clean look! Nice job!

Thanks. It could have been cleaner if I had changed the design. If done again, I will use a much simpler design, less weight and screws. But I'm happy with it.

[Ballistic17]

The cover and tailgate look good.

[Steven McKay]

Originally Posted by Ballistic17

The cover and tailgate look good.

Thanks.

indybama. Where is the build on this sick creature. I like it, I like it a lot. would like all info possible on that 4WS.

[indybama]

Thanks steve! Its a vs4-10 chassis, the rear servo mount is a VP one that, iirc, came from a vs4 chassis kit. Vfd twin trans, f10 portal front axles, VP red 105 1.9 wheels, PL hyrax 4.75 g8. HK outrunner motor, HK 35kg direct power servo.

Ordered 2 more of those servos last night. Theyre on sale right now for $27, heres the link...

https://hkhobbies.com/

Think im goina run a mamba micro x2 in this one. Waitin on axial to ship the scx10 pro body. Ordered one when they went on pre order. Havent decided if ill lock out the o/d n dig, or get some nsdrc micro servos

[Steven McKay]

Originally Posted by indybama

Thanks steve! Its a vs4-10 chassis, the rear servo mount is a VP one that, iirc, came from a vs4 chassis kit. Vfd twin trans, f10 portal front axles, VP red 105 1.9 wheels, PL hyrax 4.75 g8. HK outrunner motor, HK 35kg direct power servo.

Ordered 2 more of those servos last night. Theyre on sale right now for $27, heres the link...

https://hkhobbies.com/

Think im goina run a mamba micro x2 in this one. Waitin on axial to ship the scx10 pro body. Ordered one when they went on pre order. Havent decided if ill lock out the o/d n dig, or get some nsdrc micro servos

[indybama]

Originally Posted by Steven McKay

I was wrong on the motor thats in it. Its a HH PP 2700kv n ill run a mamba x. The wb is 12.5

[Steven McKay]

Originally Posted by indybama

I was wrong on the motor thats in it. Its a HH PP 2700kv n ill run a mamba x. The wb is 12.5

Thanks, do you have a build thread for this.

[indybama]

Sure dont, it was just somethin i threw together. If u plan to build somethin like it, i can get u measurements if u need them

[Steven McKay]

Originally Posted by indybama

Sure dont, it was just somethin i threw together. If u plan to build somethin like it, i can get u measurements if u need them

Actually I do, after I finish my flatbed I intend to build a comp level truck. Incorporating 4WS, don't need measurements but let me know what problems you run into. Also would like to follow the build, if you want post updates in this thread.

[Steven McKay]

I have tags coming, guess which ones. B-MOW71 sshhhh.

[twade984]

Originally Posted by Steven McKay

I have tags coming, guess which ones. B-MOW71 sshhhh.

PBR LOVER!


Sent from my iPhone using Tapatalk

[Steven McKay]

Close but no cigar.

[B-MOW71]

Originally Posted by Steven McKay

I have tags coming, guess which ones. B-MOW71 sshhhh.

That's funny, I just saw this post on the F-Book earlier today! I see it! Your secret is safe with me!!

I also saw the NATE DOGG plate and thought about our very own @Natedog here on RCC.

I've got an order out with them too, but haven't seen mine posted yet.

[Steven McKay]

Originally Posted by B-MOW71

That's funny, I just saw this post on the F-Book earlier today! I see it! Your secret is safe with me!!

I also saw the NATE DOGG plate and thought about our very own @Natedog here on RCC.

I've got an order out with them too, but haven't seen mine posted yet.

I know you know which ones they are or should. I saw he posted mine yesterday, and received a e-mail conformation at 3:17 am. Working late I guess. Yours should be coming soon I ordered mine the 14th so you can gauge from that. I don't do facebook but I was trying to figure out the status of the order. I decided to click the facebook icon for the hell of it and ended up there. I was able to view what batches were finished and finally saw mine, if I clicked on anything the sign in or make account page popped up.

[Steven McKay]

Plates came today.

[B-MOW71]

Plates look great! Now it's legal. Time to put the water skis on the front and take her for a spin! Maybe someday the rains will stop!!!