RCCrawler Forums

Vp Monkey · 07-27-2009, 10:10 PM

Vanquish Products SLW wheels are now avalible for preorder, they are not quite done but we expect to fill most orders as stated on the site. If they are done earlier shipments will ship in order of placed orders first

I tried to get all info in there, we will update more info as the questions roll in.

Cheers

Thomas

http://www.vanquishproducts.com/vanq...oductsslw.html

Very have added SLW .7 and .5 wide.

and adding SLW-NT .7 and .5 wide

wrightcs77 · 07-28-2009, 04:48 AM

Very nice and better priced then I thought they would be. Considering replacing my VP DH Pro's with these.......or at least 1 set of them

Uroplatus · 07-28-2009, 11:31 AM

Here are some photos...

ROCKINDAVE · 07-31-2009, 02:46 PM

Are these 2.2 wheels?

RPP Hobby · 07-31-2009, 03:08 PM

Nice job guys

tom@vp · 07-31-2009, 06:15 PM

Quote:

Originally Posted by ROCKINDAVE

Are these 2.2 wheels?

yes

tom@vp · 07-31-2009, 06:16 PM

we are adding a fifth smaller offset that will measure 9.5 from wheel to wheel on a berg.

Harley · 07-31-2009, 06:17 PM

Quote:

Originally Posted by tom@vp

we are adding a fifth smaller offset that will measure 9.5 from wheel to wheel on a berg.

Will that work for the front too or is that for the rear with the knuckle arms cut off only?

Stormin2u · 07-31-2009, 06:18 PM

Wow those are nice

are there any specs available?

Harley · 07-31-2009, 06:20 PM

Quote:

Originally Posted by Stormin2u

Wow those are nice

are there any specs available?

Quote:

Originally Posted by Vp Monkey

http://www.vanquishproducts.com/vanq...oductsslw.html

...

Stormin2u · 07-31-2009, 06:24 PM

Thanks I missed those I was so wowed by the photos I just woofed by VP's link.

ROCKCAD · 07-31-2009, 06:52 PM

is that 9.5" from outside beadlock to outside beadlock on a berg and on fornt axles w/vanquish knuckles ?, if so, thats great!

Quote:

Originally Posted by tom@vp

we are adding a fifth smaller offset that will measure 9.5 from wheel to wheel on a berg.

tom@vp · 07-31-2009, 06:54 PM

Quote:

Originally Posted by Harley0706

Will that work for the front too or is that for the rear with the knuckle arms cut off only?

I need to physical check the fits to be 100 percent sure for the 1.3 wide, but i 99 percent sure the 1.0 will be good front and back., I beileve the 1.3 will be good on back.

we are getting finished production wheels off today I will post when I gather up the info, and for those that preordered, you will be able to adjust the order if you want the 225's instead.

tom@vp · 07-31-2009, 06:56 PM

Quote:

Originally Posted by ROCKCAD

is that 9.5" from outside beadlock to outside beadlock on a berg and on fornt axles w/vanquish knuckles ?, if so, thats great!

that is to the wheel, we need to add .1 per side to include the beadlocks, soory for the confusion, so it will be 9.7 on a stock berg.

roksloski · 08-02-2009, 08:53 PM

Those are so F'in sweet.......

i think i need some of those.................

Rockshow · 08-02-2009, 09:37 PM

I've had a set of these for a couple of weeks now and with Worlds right around the corner, I've been on the rocks a lot.
I love them. I'm doing lines so much easier then before, not having to pull all the weight up the rocks have made a big difference.

Thanks VP......

TURBOFEST · 08-03-2009, 07:53 AM

Did you drop your front weight to keep the ratio from front to back the same...or did you just keep the front the same weight?

Rockshow · 08-03-2009, 08:41 AM

Quote:

Originally Posted by TURBOFEST

Did you drop your front weight to keep the ratio from front to back the same...or did you just keep the front the same weight?

I dropped the front weight! I was also able to go to a lighter foam because of the lighter wheel.

constantmotion · 08-03-2009, 09:40 AM

Exactly what is this measurement on the Berg?

1.000 wheel to wheel Inside measurement = 7.76
1.350 wheel to wheel Inside measurement = 7.06

See that the decription says Price Includes the following, 2 Wheels, 4 beadlocks, 2 Hubs, 12EA. 4-40x3/8 SST SHCS, 24EA. M3x6 SST BHCS, but it also says *** BE SURE TO AD A SET OF SLW HUBS TO YOUR ORDER OR YOU CAN NOT MOUNT THE WHEELS***. Which is it?

tom@vp · 08-03-2009, 12:57 PM

Price Includes the following, 2 Wheels, 4 beadlocks, 12EA. 4-40x3/8 SST SHCS, 24EA. M3x6 SST BHCS.

i had a typo, we reconfigured hundreds of things on the web site i had some bugs.

i dont understand your question on the inside wheel measurements, do you need another decimal place ?

Quote:

Originally Posted by constantmotion

Exactly what is this measurement on the Berg?

1.000 wheel to wheel Inside measurement = 7.76
1.350 wheel to wheel Inside measurement = 7.06

See that the decription says Price Includes the following, 2 Wheels, 4 beadlocks, 2 Hubs, 12EA. 4-40x3/8 SST SHCS, 24EA. M3x6 SST BHCS, but it also says *** BE SURE TO AD A SET OF SLW HUBS TO YOUR ORDER OR YOU CAN NOT MOUNT THE WHEELS***. Which is it?

07-27-2009, 10:10 PM	#1
Vp Monkey Rock Crawler Join Date: Jun 2008 Location: sacramento Posts: 510	Vanquish Products SLW Vanquish Products SLW wheels are now avalible for preorder, they are not quite done but we expect to fill most orders as stated on the site. If they are done earlier shipments will ship in order of placed orders first I tried to get all info in there, we will update more info as the questions roll in. Cheers Thomas http://www.vanquishproducts.com/vanq...oductsslw.html Very have added SLW .7 and .5 wide. and adding SLW-NT .7 and .5 wide Attached Images Last edited by Vp Monkey; 10-20-2009 at 07:23 PM.

08-03-2009, 09:40 AM	#19
constantmotion On the lookout for Rocks Join Date: Mar 2006 Location: Monroe, Louisiana Posts: 3,711	Exactly what is this measurement on the Berg? 1.000 wheel to wheel Inside measurement = 7.76 1.350 wheel to wheel Inside measurement = 7.06 See that the decription says Price Includes the following, 2 Wheels, 4 beadlocks, 2 Hubs, 12EA. 4-40x3/8 SST SHCS, 24EA. M3x6 SST BHCS, but it also says * BE SURE TO AD A SET OF SLW HUBS TO YOUR ORDER OR YOU CAN NOT MOUNT THE WHEELS. Which is it? Last edited by constantmotion; 08-03-2009 at 09:43 AM.*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-28-2009, 04:48 AM	#2
wrightcs77 RCC Addict Join Date: Feb 2005 Location: Minneapolis Posts: 1,496	Very nice and better priced then I thought they would be. Considering replacing my VP DH Pro's with these.......or at least 1 set of them

07-28-2009, 11:31 AM	#3
Uroplatus Team T1E/VP Driver Join Date: Feb 2008 Location: High Point Posts: 684	Here are some photos...

07-31-2009, 02:46 PM	#4
ROCKINDAVE Newbie Join Date: Jul 2009 Location: Roseville Posts: 9	Are these 2.2 wheels?

07-31-2009, 03:08 PM	#5
RPP Hobby I wanna be Dave Join Date: Jun 2006 Location: Ukiah Posts: 5,357	Nice job guys

07-31-2009, 06:16 PM	#7
tom@vp I joined the Band! Join Date: Jun 2008 Location: Sacramento Posts: 1,303	we are adding a fifth smaller offset that will measure 9.5 from wheel to wheel on a berg.

07-31-2009, 06:18 PM	#9
Stormin2u I wanna be Dave Join Date: May 2007 Location: Taylors Falls just hanging with the MNRCRC crew. Posts: 7,843	Wow those are nice are there any specs available?

07-31-2009, 06:24 PM	#11
Stormin2u I wanna be Dave Join Date: May 2007 Location: Taylors Falls just hanging with the MNRCRC crew. Posts: 7,843	Thanks I missed those I was so wowed by the photos I just woofed by VP's link.

08-02-2009, 08:53 PM	#15
roksloski I wanna be Dave Join Date: Aug 2008 Location: Deep in Swing Town Posts: 3,011	Those are so F'in sweet....... i think i need some of those.................

08-02-2009, 09:37 PM	#16
Rockshow Rock Crawler Join Date: Mar 2006 Location: North Carolina Posts: 502	I've had a set of these for a couple of weeks now and with Worlds right around the corner, I've been on the rocks a lot. I love them. I'm doing lines so much easier then before, not having to pull all the weight up the rocks have made a big difference. Thanks VP......

08-03-2009, 07:53 AM	#17
TURBOFEST I wanna be Dave Join Date: Aug 2007 Location: JERSEY BOONDOCKS Posts: 3,360	Did you drop your front weight to keep the ratio from front to back the same...or did you just keep the front the same weight?

Sponsored Links

RCCrawler Forums

Thread: Vanquish Products SLW