RCCrawler Forums

douwe · 03-15-2011, 08:02 AM

Axle battery mount for the xr10 in somewhat the same style as the servoguard..!!

And the servoguard for the bigger servo's like the 7980 ;)

samdog · 03-15-2011, 09:59 PM

how about overdrive pinion for the MRC with more than 1 tooth diffrence

CreepyCrawl · 03-15-2011, 11:55 PM

Perhaps a BTA version of your servo armor?

Less coverage around the mounting points, more at the backside of the servo.

needs2hunt · 03-21-2011, 09:38 PM

wideners for the SSZ's... if at all possible...

Duuuuuuuude · 03-22-2011, 08:09 AM

Black anodized outers, anodized yellow inners.

Peaker · 03-22-2011, 11:12 AM

How about a compact garbox ( 1 gear ) but with engange/disengageble power outtakes back and front,i would like a capstan winch like on old land rovers

I think scale semi truckers / construction guys could use somthing like that too,personally i have contemplated a TBM ( tunnel boring machine ) on G-scale track diggin holes here and there in my friends garden

tom@vp · 03-22-2011, 12:03 PM

i was watching the Japanese news last night and they had that symbol on tv and i was thinking something very similar hehe... we are on the same page it seems

Quote:

Originally Posted by Duuuuuuuude

Black anodized outers, anodized yellow inners.

Duuuuuuuude · 03-22-2011, 12:41 PM

Quote:

Originally Posted by tom@vp

i was watching the Japanese news last night and they had that symbol on tv and i was thinking something very similar hehe... we are on the same page it seems

Since I beat you to it, I'll let you make them for a reasonable fee.

Duuuuuuuude · 03-22-2011, 10:31 PM

I'm just gonna keep filling this thread up with wheel ideas.

Aggie01 · 03-22-2011, 11:15 PM

Probably already been said, but I'd like some Berg 0 ackerman knuckles

Peaker · 03-23-2011, 05:08 AM

Duuude ! that last wheel is going to be "hard" to mill/turn,im affraid the machine-time will be too high.

As a 1:1 wheel i see no problems,and it should sell well in the bible belt

Duuuuuuuude · 03-23-2011, 06:22 AM

Quote:

Originally Posted by Peaker

Duuude ! that last wheel is going to be "hard" to mill/turn,im affraid the machine-time will be too high.

Probably, but it might inspire something else.

irok22s · 03-27-2011, 03:07 AM

Quote:

Originally Posted by samdog

how about overdrive pinion for the MRC with more than 1 tooth diffrence

X2, or a under driver gear for the mrc. Either one would sell very well IMO.

samdog · 03-27-2011, 10:33 AM

Quote:

Originally Posted by irok22s

X2, or a under driver gear for the mrc. Either one would sell very well IMO.

Lets get it started

2JSC · 03-29-2011, 01:13 AM

how about some scale SLW's? I love my SLW2's... but there are a fawkton of ideas out there... how about something with a dish?

Or a wheel with more than 6 beadlock bolts?

Arct1k · 03-30-2011, 12:23 PM

Knuckles for Super 300's which take a 12 X 6 bearing....PRETTY PLEASE...

whoodie · 03-30-2011, 12:27 PM

Quote:

Originally Posted by Arct1k

Knuckles for Super 300's which take a 12 X 6 bearing....PRETTY PLEASE...

6x13 bearings have higher load ratings FYI. 5x11 and 6x12 have the same size balls, at least the bearings I use.

Stavin Trucks · 03-30-2011, 06:55 PM

you have xr10 transmission cases and motor plates...how about some Vanquished axle cases

woo I'd love'em
Thanks
-Ryan
P.S. It might be out there but it's just a thought.

dezrik · 03-31-2011, 04:20 AM

How about a Divorced Dig unit? something strong lightweight and uses revo/maxx shafts

Locked Up · 03-31-2011, 10:01 AM

Quote:

Originally Posted by team3six

5. And my all time favorite. HR makes a low profile transmission. I would love to own something like that with better gears and a case that's better built.
even a 2 speed version would be kickass. It would allow 3d interiors and keep the CG low.

YES.

03-22-2011, 10:31 PM	#89
Duuuuuuuude Suck it up! Join Date: Mar 2008 Location: Arkansas Posts: 11,652	I'm just gonna keep filling this thread up with wheel ideas. Last edited by Duuuuuuuude; 03-22-2011 at 10:35 PM.

03-15-2011, 08:02 AM	#81
douwe Rock Crawler Join Date: Jul 2006 Location: The Netherlands Posts: 911	Axle battery mount for the xr10 in somewhat the same style as the servoguard..!! And the servoguard for the bigger servo's like the 7980 ;)

03-15-2011, 09:59 PM	#82
samdog Quarry Creeper Join Date: Oct 2008 Location: Stink Grove Posts: 403	how about overdrive pinion for the MRC with more than 1 tooth diffrence

03-15-2011, 11:55 PM	#83
CreepyCrawl I wanna be Dave Join Date: Oct 2006 Location: Centered Posts: 2,082	Perhaps a BTA version of your servo armor? Less coverage around the mounting points, more at the backside of the servo.

03-21-2011, 09:38 PM	#84
needs2hunt Quarry Creeper Join Date: Dec 2005 Location: Tacoma Posts: 276	wideners for the SSZ's... if at all possible...

03-22-2011, 08:09 AM	#85
Duuuuuuuude Suck it up! Join Date: Mar 2008 Location: Arkansas Posts: 11,652	Black anodized outers, anodized yellow inners.

03-22-2011, 11:12 AM	#86
Peaker Rock Crawler Join Date: Oct 2009 Location: Danish badlands Posts: 761	How about a compact garbox ( 1 gear ) but with engange/disengageble power outtakes back and front,i would like a capstan winch like on old land rovers I think scale semi truckers / construction guys could use somthing like that too,personally i have contemplated a TBM ( tunnel boring machine ) on G-scale track diggin holes here and there in my friends garden

03-22-2011, 11:15 PM	#90
Aggie01 Quarry Creeper Join Date: Jun 2010 Location: NTXRCC Posts: 488	Probably already been said, but I'd like some Berg 0 ackerman knuckles

03-23-2011, 05:08 AM	#91
Peaker Rock Crawler Join Date: Oct 2009 Location: Danish badlands Posts: 761	Duuude ! that last wheel is going to be "hard" to mill/turn,im affraid the machine-time will be too high. As a 1:1 wheel i see no problems,and it should sell well in the bible belt

03-29-2011, 01:13 AM	#95
2JSC I wanna be Dave Join Date: May 2006 Location: FOUR 8 OH Posts: 4,913	how about some scale SLW's? I love my SLW2's... but there are a fawkton of ideas out there... how about something with a dish? Or a wheel with more than 6 beadlock bolts?

03-30-2011, 12:23 PM	#96
Arct1k Quarry Creeper Join Date: Oct 2008 Location: In the basement... Posts: 473	Knuckles for Super 300's which take a 12 X 6 bearing....PRETTY PLEASE...

Sponsored Links

03-30-2011, 06:55 PM	#98
Stavin Trucks Quarry Creeper Join Date: Jan 2011 Location: Augusta Posts: 306	you have xr10 transmission cases and motor plates...how about some Vanquished axle cases woo I'd love'em Thanks -Ryan P.S. It might be out there but it's just a thought.

03-31-2011, 04:20 AM	#99
dezrik Rock Crawler Join Date: Aug 2006 Location: Pinedale, WY Posts: 873	How about a Divorced Dig unit? something strong lightweight and uses revo/maxx shafts

RCCrawler Forums

Thread: New idea thread?