Re: Natedog's Vaterra ASCENDER Ernie, Yes, she is had that ready to cook up as soon as I got changed out of riding gear! Done, she say's hi to and thanks to Marcia for the nice letter. :) YotaDUMP, Nice setup. Thanks, we need 'em hope it all holds out too. Thanks! Nate |
Re: Natedog's Vaterra ASCENDER PICS! Attended MRB Fire and Ice near Reno, Nevada last weekend, they had three courses laid out with about 180 gates each. There was easy, medium and difficult (guaranteed winching) we started on medium and saved difficult for last. http://www.rccrawler.com/forum/compe...st-trails.html Little snowing. http://img.photobucket.com/albums/v2...psjflkye5a.jpg Drive was about 7 hours crazy due to chain checkpoints. http://img.photobucket.com/albums/v2...psczrakef8.jpg Starting intermediate course, Rockhugger's building a scaler Ascender Blazer, but despite a week of late nights including hotel room wrenching it wasn't ready, so he drove my Blazer and I drove my K10 with WB3. http://img.photobucket.com/albums/v2...psj2m2t3l1.jpg http://img.photobucket.com/albums/v2...psdirgyuad.jpg http://img.photobucket.com/albums/v2...psh9yo7db6.jpg Around gate 29 I twisted the ball end off of the left CVD and did an on-course repair. This was on 2S with stock 35T motor, we now have stronger CVDs from Vaterra, thanks! Back on course after repair, pic to come of the broken CVD. http://img.photobucket.com/albums/v2...psozdhdsvx.jpg Sidehill with lots of loose scree and dirt, then a hard rocky, silty covered climb and rock squeeze. http://img.photobucket.com/albums/v2...ps80worqbp.jpg |
Re: Natedog's Vaterra ASCENDER The easy course. http://img.photobucket.com/albums/v2...ps2ujre5ws.jpg http://img.photobucket.com/albums/v2...psx2wt78nw.jpg http://img.photobucket.com/albums/v2...psqebd91hm.jpg Gate 25 into the difficult course. http://img.photobucket.com/albums/v2...ps6w12qg9l.jpg http://img.photobucket.com/albums/v2...psytxyxxlh.jpg http://img.photobucket.com/albums/v2...psivmcscjf.jpg Really cool house made out of old train car, exterior entryway windbreak walls made with cinder block and some old glass window doors. Did I mention how cold and relentlessly windy it was this weekend? http://img.photobucket.com/albums/v2...psreymyljm.jpg http://img.photobucket.com/albums/v2...psqbrhvgja.jpg |
Re: Natedog's Vaterra ASCENDER Hey Nate, it's time to give the uni upgrade a try! Wish I could have made the trip, maybe next time. May be we will make it down sometime this summer, if you guys aren't washed away! "thumbsup" Ernie |
Re: Natedog's Vaterra ASCENDER Uni upgrade? |
Re: Natedog's Vaterra ASCENDER Ernie, might have to do the universal axle mod. Would have been nice, we should be here this summer, but other valley areas might wash away. You're always welcome here! Fyrstormer, might be. :) |
Re: Natedog's Vaterra ASCENDER I was asking what the "uni upgrade" is. |
Re: Natedog's Vaterra ASCENDER Oh, sorry I misunderstood. Codyboy's Axial Universal axle mod for bulletproof Ascender steering: http://www.rccrawler.com/forum/vater...cender-12.html |
Re: Natedog's Vaterra ASCENDER That link takes me to a traxxas thread? Sent from my phone because mail is so 1990 |
Re: Natedog's Vaterra ASCENDER Which link? I just checked Fire and Ice link and Codyboy's bulldog bronco ascender links and they work for me. |
Re: Natedog's Vaterra ASCENDER Quote:
Must be a Tapatalk issue... Sent from my phone because mail is so 1990 |
Re: Natedog's Vaterra ASCENDER Might be, I've never liked or installed most apps because they are usually unnecessary, I've got a smartphone with a web browser. :mrgreen: Try clearing phone/tablet browser cache, close out browser afterwards, re-open and try the link. :) |
Re: Natedog's Vaterra ASCENDER Crawled Sunday at Moonrocks too, group of guys from Mountain Roo came by in their Subarus four-wheeling and hill climbing, some really nicely setup cars! They stopped and chatted a bit, said they were Subaru Brand Ambassadors (Nick driving and forget his buddy's name sorry), before they left gave us each a sweet Subaru coffee mug with matching orange coaster! Thanks guys! Guy in the brand new blue CrossTrek ripped a big piece of plastic aerodynamic under panel off on the steep down and back up through the wash below us, stopped, threw it in the hatchback and kept on wheeling. http://www.mtnroo.com/ http://img.photobucket.com/albums/v2...psabpeiwcu.jpg http://img.photobucket.com/albums/v2...pspghyzdcd.jpg http://img.photobucket.com/albums/v2...psjfbhzjs9.jpg http://img.photobucket.com/albums/v2...pspkrzp2ff.jpg |
Re: Natedog's Vaterra ASCENDER More free crawl and trail riding. http://img.photobucket.com/albums/v2...psa4cny3du.jpg http://img.photobucket.com/albums/v2...ps2wcyulb8.jpg My left front broken CVD, after I cleaned all the grease off. http://img.photobucket.com/albums/v2...psghbzky3r.jpg Not sure which of these two pics I like better, what do you like? http://img.photobucket.com/albums/v2...psehosmhm1.jpg http://img.photobucket.com/albums/v2...psaw6mizsk.jpg Reflections http://img.photobucket.com/albums/v2...psu1qs675z.jpg Getting late, colder and windier http://img.photobucket.com/albums/v2...pstxrs1oyn.jpg Really started snowing on the way home and worried that they might close the pass. http://img.photobucket.com/albums/v2...ps5hurluvk.jpg |
Re: Natedog's Vaterra ASCENDER Quote:
http://i1264.photobucket.com/albums/...s/IMG_7692.jpg http://i1264.photobucket.com/albums/...s/IMG_7687.jpg "thumbsup" Ernie |
Re: Natedog's Vaterra ASCENDER That was loads of fun, cold, but very fun!!! |
Re: Natedog's Vaterra ASCENDER Ernie, thanks for the pics of your brass axle tube weights and SCX10.2 SSD c-hubs, knuckles and Axial universals, looks great! Rockhugger, yes it was! I just received couple sets of spare Vaterra CVDs for spares and they are bigger at the neck down where they've been twisting off! Front CV Shaft Set: ASN (VTR232076) http://www.horizonhobby.com/front-cv...-asn-vtr232076 The newer sets are noticeably thicker, so I measured them with calipers, original CVDs are 0.157", new are 0.195" at the neck down just before the ball end joint, woohoo beefier CVDs! I dont' know if they are as strong as Axial Universals yet, but they look stronger and are thicker, also in the pics you'll see that the stub axle bell area has more taper and thinner at the edge to maintain almost same steering angle with the thicker inner axle. Stub axle bell still looks like good amount of steel around the cross pin holes. Going to install some spare Gunnar Pins and see how they do! 8) "thumbsup" http://www.rccrawler.com/forum/axles...axle-pins.html Edit: Pics added, the CVD with the silver metal ring on it is the old style, without is the new style! http://img.photobucket.com/albums/v2...psq1wzheyo.jpg http://img.photobucket.com/albums/v2...ps1hufneiw.jpg http://img.photobucket.com/albums/v2...psouwqgsbc.jpg |
Re: Natedog's Vaterra ASCENDER Forgot, pics added!!! 8) |
Re: Natedog's Vaterra ASCENDER Nice to see them beefing up the CVDs, though my OG sets have held up great. |
Re: Natedog's Vaterra ASCENDER nice pic of the two cvds |
All times are GMT -6. The time now is 10:28 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com