11-30-2015, 11:52 AM | #1 |
Newbie Join Date: Nov 2015 Location: Boulder
Posts: 3
| TH RTR or Kit?
Hello RCCrawlers, I am new here and newish to RC, but wanting to get back into it... build a Tamiya Montera back in Jr high (20+ years ago).. so not being too mechanically inclined and to be honest a bit intimidated by all the various options out there, i am debating if I should get the Twin Hammers RTR w/ some options (locker, sway bars, etc) or go w/ the kit and build from ground up... Your advice is appreciated, Cheers, Q |
Sponsored Links | |
11-30-2015, 02:37 PM | #2 |
Rock Crawler Join Date: Jul 2005 Location: Playing with toys with my son's
Posts: 616
| Re: TH RTR or Kit?
If you like to build things and have the skill set, then the kit is for you. The kit comes with almost all the hop ups you will want,and the body does not have the funny looking lights on it. It will cost more in the long run if you need a radio but do not add in the price of servos, you will need/want them either way, kit or RTR.
|
11-30-2015, 09:22 PM | #3 |
Pebble Pounder Join Date: Nov 2014 Location: Manchester
Posts: 109
| Re: TH RTR or Kit?
Go with the kit. If the kit was out when I bought my roller used I would have bought the kit.
|
11-30-2015, 09:53 PM | #4 |
I wanna be Dave Join Date: Oct 2010 Location: Caldwell ID.
Posts: 4,328
| Re: TH RTR or Kit?
My vote is kit... Helping my wife build hers currently... The directions and bagging is some of the best I have ever worked on, tons better than the last axial kit I put together. Another advantage is you are intimately familiar with the mechanical bits, when/if something breaks. More advantages, the choice of electronics (cheap or expensive), metal trans gears, sway bars, front locker, and the knowledge it was put together right with enough loctite, and grease. Bad things ... Some screws are difficult to thread, easy to strip. You have to buy electronics, and a pinion. |
12-01-2015, 02:51 PM | #5 |
Rock Crawler Join Date: Jan 2011 Location: Groningen, The Netherlands
Posts: 528
| Re: TH RTR or Kit?
Go for the kit. It has several hop-ups incorporated, among it, sway bars (absulutely needed if You want control at speed) and steel gears for the shifter. I never broke the plastic gears, but better sure than sorry. Added to the hop-ups, building a car, wil get You up to speed with the current state of technology. Remember to grease screws You thread in plastic, and building will be a breeze. A tiiiny dab of Tamiya ceramic grease on every self-tapping screw, is what I have always used. If You go for the kit, I'd recommend the new, and very compact, Hobbywing Quickrun 1060 ESC with a Redcat brushed 15t 550-sized motor(or any other brand, same 15t 550 motor, different sticker on it, there are many). Don't go for the standard 15t 540!! They are pretty quick, but gobble amps, run hot, and burn way too easy for my taste. I tried several combo's, up to a luxurious LRP3300 stock spec sensored brushless, went great, but the weather has been atrocious overhere. More rain than seems natural, and sensored systems and water? Recepy for trouble. The brushed 15t 550 and the quickrun, however kept going and going. The ample torque of the long-can 550 made all the difference too. And it's as cheap as it gets. AFA batteries go, Turnigy 2200 nano's, or zippy's (lipo) are about $10.-, and get You around 25 minutes of running with the 15t 550. A bit less with the traxxas 12t. Much longer if You stay in 1st gear.. but..yeah.. shifting is just too darned much fun, so I only tried that once. Called it quits after half an hour.. Remember to buy a LiPo-charger. Trying to charge a LiPo with an old NiCad charger will only lead to some peculiar hissing, and then an impressive fireball.... Don't ask.. You know what? I got some time. I'll make You a small list. What You'll need:
That'll get You running. Ball-bearings are (unlike most Tamiya kits) already included. Good luck! Last edited by Jay-Em; 12-01-2015 at 03:32 PM. |
12-16-2015, 04:39 PM | #6 | |
I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia
Posts: 12,107
| Re: TH RTR or Kit? Quote:
| |
12-16-2015, 10:16 PM | #7 |
Pebble Pounder Join Date: Nov 2015 Location: Bay Area
Posts: 196
| Re: TH RTR or Kit?
If it's not too late let me offer an alternative view... I've built several RC cars in the past. Most were Tamiya cars. My last build-up was their Wild Dagger dual motor 4x4 Tamiya which originally came with two standard 27t 540's. I did multiple upgrades from standard aftermarket suspension components to creating my own chassis from Aluminum stock, upgrading to an ESC with dual 19t race 540's which resulted in a car that was wickedly fast, barely controllable culminating in a lot of broken steering components without me ever being able to enjoy it. In the end, I downgraded it to the original setup so I could actually enjoy it. So fast forward to today... I also recently bought a Twin Hammers V2 RTR instead of the kit because I want to start with a known reliable setup and enjoy it as I upgrade rather than risk messing it up from the gitgo without ever enjoying it. One thing I should point out as well is the V2 version has what I understand is an RC system that's def. superior to the one that came with the original Twin Hammers which is one area that I've heard makes it worth it over the original. So far I enjoyed it for a couple of weeks while I waiting for the upgraded Hot Racing Aluminum rear suspension arms from Hot Racing to arrive. I installed those last week and continue to enjoy the car as I ordered more upgrades. Recently I received the GCM front aluminum shock towers & GMade 85mm oil shocks that go with it and now quandary is... Do I install it immediately play with it for a while first, or upgrade it first? IMHO, it's a nice problem to have. ;) HTH Pic from the results of running it and rolling over in mud today.... Last edited by Ca. Off Roader; 12-17-2015 at 12:42 AM. |
TH RTR or Kit? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
wraith kit or RTR kit | champ198 | Axial Wraith | 2 | 05-02-2013 02:02 PM |
wraith rtr/builder kit , ax10 ridgecrest or scx10 kit hocho/dingo | xC Pirates | Newbie General | 9 | 06-09-2012 06:54 AM |
AX10 RTR or Kit for a build? Kit seems more popular, but RTR has some nice features. | nukexbi | Axial AX-10 Scorpion | 21 | 05-09-2008 01:27 PM |
| |