Crawl Space Comp Spec LED rock lights

[The Crawl Space]

Crawl Space Comp Spec LED rock lights.
Don't get left out in the dark on those night runs, get the light on the rocks where you need it most!



Light housings are 3D printed in durable ABS plastic and are sandable and paintable. Each housing has 5 holes for mounting, holes are printed slightly small for positive thread engagement. Holes can be drilled out per personal preference.

Waterproof Light strip is rated at 12v with 60 lumen output with 12" whip of 24 ga. wire for easy hook up.





Comp Spec LED rock lights are available in pairs. Each pair includes, 2 Pin male/female pigtails, mini zip ties and stainless steel M3 screws from Team KnK Hardware.



1 pair $29.00 total shipped CONUS. 2 pairs $54 total shiped CONUS. All other please PM for shipping quote.

Send payment via paypal to: thecrawlspaceco@yahoo.com be sure payment is for "goods and services" and check that your mailing address is correct. Be sure to include in the "Notes" your name or screen name and what you are paying for.

[allanon1965]

Originally Posted by The Crawl Space

Attachment 321789

Crawl Space Comp Spec LED rock lights.
Don't get left out in the dark on those night runs, get the light on the rocks where you need it most!

Attachment 321790 Attachment 321791

Light housings are 3D printed in durable ABS plastic and are sandable and paintable. Each housing has 5 holes for mounting, holes are printed slightly small for positive thread engagement. Holes can be drilled out per personal preference.

Waterproof Light strip is rated at 12v with 60 lumen output with 12" whip of 24 ga. wire for easy hook up.

Attachment 321792 Attachment 321793

Attachment 321794 Attachment 321795

Comp Spec LED rock lights are available in pairs. Each pair includes, 2 Pin male/female pigtails, mini zip ties and stainless steel M3 screws from Team KnK Hardware.

Attachment 321796

1 pair $29.00 total shipped CONUS. 2 pairs $54 total shiped CONUS. All other please PM for shipping quote.

We are taking a pre-order count at the moment to gauge demand. Enter your screen name and how many pairs you would like. Cut off is Monday, July 20th. We will contact everyone on July 21st for shipping and payment info.

1. allanon1965 1 set
2.
3.
4.
5.
6.
7.
8.
9.
10...

I will take a set!

[idaho]

I'll take two sets

[Alexander_0_1]

1 pair $29.00 total shipped CONUS. 2 pairs $54 total shiped CONUS. All other please PM for shipping quote.

We are taking a pre-order count at the moment to gauge demand. Enter your screen name and how many pairs you would like. Cut off is Monday, July 20th. We will contact everyone on July 21st for shipping and payment info.

1. allanon1965 (1 set).
2. idaho (2 sets).
3. Alexander_0_1 (3, or more).
4.
5.
6.
7.
8.
9.
10...

[Shinjari]

Any "night" shots? And Overall dimensions? Thanks =)

[The Crawl Space]

Originally Posted by Shinjari

Any "night" shots? And Overall dimensions? Thanks =)

I'll get some posted up later today

[Shinjari]

Originally Posted by The Crawl Space

I'll get some posted up later today

Perfect look forward to pics and dimensions, hopefully these will fit in some of the tight spots I have on some of my rigs

[Turtlejon]

Originally Posted by Alexander_0_1

1 pair $29.00 total shipped CONUS. 2 pairs $54 total shiped CONUS. All other please PM for shipping quote.

We are taking a pre-order count at the moment to gauge demand. Enter your screen name and how many pairs you would like. Cut off is Monday, July 20th. We will contact everyone on July 21st for shipping and payment info.

1. allanon1965 (1 set).
2. idaho (2 sets).
3. Alexander_0_1 (3, or more).
4. Turtlejon (1 set)
5.
6.
7.
8.
9.
10...

Thanks!

[The Crawl Space]

Finally got some time to snap some pics

Dimensions in mm.









Best shots I could get with an iPhone on the rockpile with some residual light from the front of the shop. This is just a pair of rock lights on the front.

[Shinjari]

Nice! That is a lot of light for a pair. I'll have to check my rig to see if theres room for these and I sure hope there is.

Question related to the light bar, is this the same one you use for your Warn Winch fairlead?

[The Crawl Space]

Originally Posted by Shinjari

Nice! That is a lot of light for a pair. I'll have to check my rig to see if theres room for these and I sure hope there is.

Question related to the light bar, is this the same one you use for your Warn Winch fairlead?

Good deal.
Yes, this is the same light strip that is used in the LED fairlead.

[Turtlejon]

Can you show a picture of them mounted on a wraith?

[Sentinel]

I'll take 2 sets. Look good!

[The Crawl Space]

Originally Posted by Turtlejon

Can you show a picture of them mounted on a wraith?

I'll get some pics with the lights mounted on a Wraith this week

[The Crawl Space]

Pre-order list updated 07.12.15

1. allanon1965 (1 set).
2. idaho (2 sets).
3. Alexander_0_1 (3, or more).
4. Turtlejon (1 set)
5. Sentinel (2 sets)
6.
7.
8.
9.
10...

[vwdaveb]

1 set. Can I see a pic of the winch light, light on and light off?

[The Crawl Space]

Originally Posted by vwdaveb

1 set. Can I see a pic of the winch light, light on and light off?

Here's a link to some pics and info

Crawl Space Comp Spec LED Fairlead.

[The Crawl Space]

Alrighty thanks everyone for your patience. Here is a quick over view to run the LED rocklights on the Axial Wraith

Pretty simple actually, we're going to use some 1/4" wire keeps as I call them to attach the the lights to the cage.



This set up will allow almost limitless positioning options. here a quick few I came up with.







This is our shop demo truck so don't hate on how beat it is

[vwdaveb]

I'll take a set of rock lights and a winch light. Any chance you'd share what printer you use? I want to buy one, been looking at the Lulz mini, s
printrbot simple metal and prusa i3

[The Crawl Space]

Originally Posted by vwdaveb

I'll take a set of rock lights and a winch light. Any chance you'd share what printer you use? I want to buy one, been looking at the Lulz mini, s
printrbot simple metal and prusa i3

Gotcha, I will add you to the list.

we run a Makerbot printer.