Go Back   RCCrawler Forums > Vendors > Vendors Market > Vendors Electronics
Loading

Notices

Thread: End point adjuster for two position channel

Reply
 
LinkBack Thread Tools Display Modes
Old 02-21-2018, 02:55 PM   #1
I wanna be Dave
 
Join Date: May 2007
Location: Vancouver, BC
Posts: 2,379
Default End point adjuster for two position channel



Part No. 2EPA

This was built to help out the guys with the TRX-4 rigs as the transmitter that comes with it doesn't have the ability to adjust the amount of servo throw on the diff lockers or on the transmission shifter. If the servo is trying to swing further than the linkage will allow, the servo might overheat and eventually fail. With this controller you can set how far the servo moves and keep your servo safe.

If you have a transmitter with a two position channel and it doesn't have end point adjustment, then this is for you too.

Price $24
Order two or more and the price is $21 each.
Shipping extra.

Last edited by heyok; 02-21-2018 at 02:57 PM.
heyok is offline   Reply With Quote
Sponsored Links
Old 08-26-2018, 05:59 PM   #2
Newbie
 
Join Date: Jul 2018
Location: Mendocino
Posts: 11
Default Re: End point adjuster for two position channel

Hey I have been checking out your stuff and I am possibly gonna need a couple of these. Will they handle 7.4 volts? I am hoping so, let me know. Thanks!
JDXX is offline   Reply With Quote
Old 08-26-2018, 06:00 PM   #3
I wanna be Dave
 
Join Date: May 2007
Location: Vancouver, BC
Posts: 2,379
Default Re: End point adjuster for two position channel

Quote:
Originally Posted by JDXX View Post
Hey I have been checking out your stuff and I am possibly gonna need a couple of these. Will they handle 7.4 volts? I am hoping so, let me know. Thanks!
Yes, they will be just fine with 7.4 volts.
heyok is offline   Reply With Quote
Old 08-26-2018, 06:42 PM   #4
Newbie
 
Join Date: Jul 2018
Location: Mendocino
Posts: 11
Default Re: End point adjuster for two position channel

Thank you very much. Just what I wanted to hear too!
JDXX is offline   Reply With Quote
Reply



End point adjuster for two position channel - Similar Threads
Thread Thread Starter Forum Replies Last Post
End point adjuster for Diff Servos heyok Traxxas TRX-4 21 03-21-2019 05:36 AM
Convert a TWO position channel to a THREE position channel! heyok Vendors Electronics 3 11-24-2015 05:42 AM
Servo EPA end point adjuster / controller / limiter wantAsummit Electronics 15 08-10-2010 03:13 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 10:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com