RCCrawler Forums

Hyde802 · 10-06-2010, 09:08 PM

Id like to get in on a get together.

Hyde802 · 04-30-2011, 09:42 PM

Going to Horn of the moon tomorrow (sunday) afternoon around 3 ish.

Hyde802 · 05-01-2011, 02:42 PM

Crawled for about an hour, then my plastic servo horn broke on a full throttle assault down the rocks. Haha.

And holy bejeebus there is some water there.

Next to the grocery getter

Just ordered an aluminum one. And I have another plastic one to get my by till then.

meatmonkey · 05-18-2011, 02:18 PM

Anyone available this sunday? I'd be game to hit up either Wrightsville resivour or the East Barre Dam.

Hyde802 · 05-24-2011, 09:08 PM

Should have checked this Friday. Did you end up going anywhere? My servo horn came in today, so Im good to go again!

meatmonkey · 05-25-2011, 09:34 AM

I actually ended up at the brook on Shady Rill testing the waterproofness of my SCX.

Works pretty good.

Hyde802 · 06-09-2011, 02:06 PM

This weekends calling for rain, but Im going to try to make it over to Johnson so do some crawling. Need to test out my new front end steup (redesigned the 3 link)

Im also free next weekend if anyones up for anything.

meatmonkey · 06-10-2011, 05:49 AM

Gotta go to my sister's wedding on saturday, but Sunday I'm free.

Would be interested in meeting up at Horn of the Moon or East Barre damn. Or heck, even the parking lot at Black Rock Coal is tons of fun.

themichavo · 06-14-2011, 07:05 AM

Hey it's been awhile since I been on here, heck it's been a while since I crawled with my shitty cliff climber. Got some plans for a new build. Just got back from Afghanistan. It sucked but wish I had my climber prolly would have been fun. I'd be up for a gtg but my blazers altinater decided to stop working so without a truck right now. But east barre Dam I used to crawl all the time and is alot of fun just wish I had a better crawler. Working on a Moa berg build.

meatmonkey · 06-16-2011, 07:37 AM

Anyone up for this weekend on Sunday? Say the East Barre Dam?

themichavo: thankyou for your service. Men and women like you keep this country free. I'm an ASE certified tech, so I you want help putting an alternator in just let me know.

BJK · 06-18-2011, 11:10 PM

what time?

meatmonkey · 06-19-2011, 10:19 AM

Whenever works. I live less than five minutes from the East Barre Damn. My AX-10 and SCX are ready to rock.

Give my cell a call if you'd like to meet up and crawl. 1-802-917-3067

themichavo · 06-20-2011, 05:12 AM

Well I got my blazer fixed finally. Thanks for asking if I needed help with the altinater but I got it. I know most everything to do on my vehicles. But I am looking for a good deal on a tranny flush and filter change. My tranny bucks like a mule when shifting and the fluid looks like shit just haven't had what most shops are asking. There all asking like 200 bucks. For me right now with out a job I can't afford that, 100 is pushing it. A hundred dollar altinater put me in the whole. But anyways sorry I missed the gtg this weekend was my sisters gradutation and we had family come up from southern nh. Just let me know the next time any of you are going to east barre dam. My email is irbfishing13@aim.com. I check that all the time so that's the best way to get a hold if me.

themichavo · 06-20-2011, 02:49 PM

Started building a course in my back yard it's going good but running out of supplys. But getting more soon. Would post pics but my iPhone won't let me.

meatmonkey · 06-21-2011, 07:59 AM

Yeah, don't you just hate it when technology doesn't cooperate.

I was up at the washout on Brook road last weekend, which sucks, but man there is some good crawling left behind.

Jus · 06-21-2011, 08:18 PM

Quote:

Originally Posted by meatmonkey

I was up at the washout on Brook road last weekend, which sucks, but man there is some good crawling left behind.

I'm glad I'm not the only one that has found enjoyment in washed out roads.. I also had a blast on a section of washed out road this spring.. Was just wide enough for 1/10 scale crawling. Unfortunately they fixed it.

It's not like anyone depended on the road or anything, it was just part of a resevoir and nature area so I was hoping they would've left it longer.

Hyde802 · 06-26-2011, 07:04 PM

Found some great spots on rt 12 south of elmore the otherday, Didnt have my crawler, but ill be back some time this week to check them out.

meatmonkey · 06-26-2011, 09:04 PM

Spend about an hour on the East Barre dam yesterday till I chucked a front driveshaft.

Location of broken D-shaft:

Hyde802 · 06-30-2011, 07:59 AM

Found this little spot Monday on Rt12.

Then it cartwheeled a couple times off a rock and broke the plastic knuckle. I have aluminum ones on the way

Ill be going back when my parts come in.

meatmonkey · 07-01-2011, 12:01 AM

Uh, Hyde802, is your body reinforced with digital camo duct tape? Cause that is straight Vermonter right there. "I'll just cover it in camo and noone will even notice!". I'm personally a Goop and layers of lexan on the inside kind of guy, but whatever works.

10-06-2010, 09:08 PM	#61
Hyde802 Quarry Creeper Join Date: Sep 2010 Location: Berlin, VT Posts: 275	Id like to get in on a get together.

04-30-2011, 09:42 PM	#62
Hyde802 Quarry Creeper Join Date: Sep 2010 Location: Berlin, VT Posts: 275	Going to Horn of the moon tomorrow (sunday) afternoon around 3 ish.

05-01-2011, 02:42 PM	#63
Hyde802 Quarry Creeper Join Date: Sep 2010 Location: Berlin, VT Posts: 275	Crawled for about an hour, then my plastic servo horn broke on a full throttle assault down the rocks. Haha. And holy bejeebus there is some water there. Next to the grocery getter Just ordered an aluminum one. And I have another plastic one to get my by till then.

05-18-2011, 02:18 PM	#64
meatmonkey I wanna be Dave Join Date: Aug 2004 Location: central VT Posts: 2,300	Anyone available this sunday? I'd be game to hit up either Wrightsville resivour or the East Barre Dam.

05-24-2011, 09:08 PM	#65
Hyde802 Quarry Creeper Join Date: Sep 2010 Location: Berlin, VT Posts: 275	Should have checked this Friday. Did you end up going anywhere? My servo horn came in today, so Im good to go again!

05-25-2011, 09:34 AM	#66
meatmonkey I wanna be Dave Join Date: Aug 2004 Location: central VT Posts: 2,300	I actually ended up at the brook on Shady Rill testing the waterproofness of my SCX. Works pretty good.

06-09-2011, 02:06 PM	#67
Hyde802 Quarry Creeper Join Date: Sep 2010 Location: Berlin, VT Posts: 275	This weekends calling for rain, but Im going to try to make it over to Johnson so do some crawling. Need to test out my new front end steup (redesigned the 3 link) Im also free next weekend if anyones up for anything.

06-10-2011, 05:49 AM	#68
meatmonkey I wanna be Dave Join Date: Aug 2004 Location: central VT Posts: 2,300	Gotta go to my sister's wedding on saturday, but Sunday I'm free. Would be interested in meeting up at Horn of the Moon or East Barre damn. Or heck, even the parking lot at Black Rock Coal is tons of fun.

06-14-2011, 07:05 AM	#69
themichavo Newbie Join Date: Jul 2009 Location: plainfield,vt Posts: 39	Hey it's been awhile since I been on here, heck it's been a while since I crawled with my shitty cliff climber. Got some plans for a new build. Just got back from Afghanistan. It sucked but wish I had my climber prolly would have been fun. I'd be up for a gtg but my blazers altinater decided to stop working so without a truck right now. But east barre Dam I used to crawl all the time and is alot of fun just wish I had a better crawler. Working on a Moa berg build.

06-16-2011, 07:37 AM	#70
meatmonkey I wanna be Dave Join Date: Aug 2004 Location: central VT Posts: 2,300	Anyone up for this weekend on Sunday? Say the East Barre Dam? themichavo: thankyou for your service. Men and women like you keep this country free. I'm an ASE certified tech, so I you want help putting an alternator in just let me know.

Sponsored Links

06-18-2011, 11:10 PM	#71
BJK Newbie Join Date: Mar 2009 Location: woodbury Posts: 38	what time?

06-19-2011, 10:19 AM	#72
meatmonkey I wanna be Dave Join Date: Aug 2004 Location: central VT Posts: 2,300	Whenever works. I live less than five minutes from the East Barre Damn. My AX-10 and SCX are ready to rock. Give my cell a call if you'd like to meet up and crawl. 1-802-917-3067

06-20-2011, 05:12 AM	#73
themichavo Newbie Join Date: Jul 2009 Location: plainfield,vt Posts: 39	Well I got my blazer fixed finally. Thanks for asking if I needed help with the altinater but I got it. I know most everything to do on my vehicles. But I am looking for a good deal on a tranny flush and filter change. My tranny bucks like a mule when shifting and the fluid looks like shit just haven't had what most shops are asking. There all asking like 200 bucks. For me right now with out a job I can't afford that, 100 is pushing it. A hundred dollar altinater put me in the whole. But anyways sorry I missed the gtg this weekend was my sisters gradutation and we had family come up from southern nh. Just let me know the next time any of you are going to east barre dam. My email is irbfishing13@aim.com. I check that all the time so that's the best way to get a hold if me.

06-20-2011, 02:49 PM	#74
themichavo Newbie Join Date: Jul 2009 Location: plainfield,vt Posts: 39	Started building a course in my back yard it's going good but running out of supplys. But getting more soon. Would post pics but my iPhone won't let me.

06-21-2011, 07:59 AM	#75
meatmonkey I wanna be Dave Join Date: Aug 2004 Location: central VT Posts: 2,300	Yeah, don't you just hate it when technology doesn't cooperate. I was up at the washout on Brook road last weekend, which sucks, but man there is some good crawling left behind.

06-26-2011, 07:04 PM	#77
Hyde802 Quarry Creeper Join Date: Sep 2010 Location: Berlin, VT Posts: 275	Found some great spots on rt 12 south of elmore the otherday, Didnt have my crawler, but ill be back some time this week to check them out.

06-26-2011, 09:04 PM	#78
meatmonkey I wanna be Dave Join Date: Aug 2004 Location: central VT Posts: 2,300	Spend about an hour on the East Barre dam yesterday till I chucked a front driveshaft. Location of broken D-shaft:

06-30-2011, 07:59 AM	#79
Hyde802 Quarry Creeper Join Date: Sep 2010 Location: Berlin, VT Posts: 275	Found this little spot Monday on Rt12. Then it cartwheeled a couple times off a rock and broke the plastic knuckle. I have aluminum ones on the way Ill be going back when my parts come in.

07-01-2011, 12:01 AM	#80
meatmonkey I wanna be Dave Join Date: Aug 2004 Location: central VT Posts: 2,300	Uh, Hyde802, is your body reinforced with digital camo duct tape? Cause that is straight Vermonter right there. "I'll just cover it in camo and noone will even notice!". I'm personally a Goop and layers of lexan on the inside kind of guy, but whatever works.

RCCrawler Forums

Thread: We need to have a green mountain GTG