Go Back   RCCrawler Forums > RCCrawler General Tech > Videos!
Loading

Notices

Thread: Ayala Metal Works YouTube Channel

Reply
 
LinkBack Thread Tools Display Modes
Old 01-29-2019, 11:38 AM   #21
Fabricator
 
Gavin Ayala's Avatar
 
Join Date: Aug 2017
Location: Tyler
Posts: 309
Default Re: Ayala Metal Works YouTube Channel

Footage of the Chuggy out on the C.I rock pile doing some of the hardest trails with the Pitbull Tires - PBX A/T Hardcore 1.9 tire. I enjoy driving with these small tires they make any easy trail for a bigger tire a challenge with these 4.05" size small tires.

Cherokee To Chuggy Build Thread Link:''Cherokee To Chuggy'',a AMW built SCX10 2

Wheel/Tire/foam:
Vanquish Products - 1.9 OMF Bead lock w/ IBTR rings Pitbull Tires - PBX A/T Hardcore Crawler Innovations - Lil Nova 4.0 Standard / Medium Outer CWR-2092 Front Deuce's Wild CWR-3006 Rear

Cherokee To Chuggy" Specs:
Custom tube chassis, running on 4S lipo 1600mah, Castle Creations MMP ESC, Castle 10A BEC, Tekin 13.5 Gen 3 brushless motor, Hitec 7954sh steering servo, Vanquish Products Currie Rock Jock Front/Rear, Proline shocks front/ Vaterra Shocks rear.



Thanks For Watching!
Gavin Ayala is offline   Reply With Quote
Sponsored Links
Old 02-15-2019, 12:50 PM   #22
Newbie
 
Join Date: Aug 2012
Location: Philadelphia
Posts: 30
Default Re: Ayala Metal Works YouTube Channel

Great channel! Thanks for all the content. That Chuggy of yours has a great scale look and looks incredibly capable!
apex is offline   Reply With Quote
Old 02-19-2019, 07:13 PM   #23
Fabricator
 
Gavin Ayala's Avatar
 
Join Date: Aug 2017
Location: Tyler
Posts: 309
Default Re: Ayala Metal Works YouTube Channel

Quote:
Originally Posted by apex View Post
Great channel! Thanks for all the content. That Chuggy of yours has a great scale look and looks incredibly capable!

Thank You for the kind words.
-Gavin
Gavin Ayala is offline   Reply With Quote
Old 02-19-2019, 07:18 PM   #24
Fabricator
 
Gavin Ayala's Avatar
 
Join Date: Aug 2017
Location: Tyler
Posts: 309
Default Re: Ayala Metal Works YouTube Channel

I took Myopic to the C.I Rock Pile and tested the new front servo along with the grooved and sanded tires.
Ready To Run Weight 6 Pounds

Build Thread For "Myopic" Competition Unlimited Super:"Myopic" A Super Agent XR-10 Build by Crawler Innovations

Build Specs:"Myopic" the Y Town Crawlers Super Agent Chassis - Full Carbon Fiber
Both axles are front Axial XR-10 but built up with every aluminum part Vanquish Products made for the XR-10.
Tops, transmissions, motor plates, axle C's, wraith knuckles, upper link mounts,
The axle tops and case bottoms have been machined to fit 3/8" steel tube inside them.
The tube is used to widen the axles for use with Wraith Long Side universals. Both axles have complete Axial Hardened Steel Gear sets and Titanium top shafts.
Custom steering servo mounts front and rear
The 115mm rims are carbon fiber and made by Y Town Crawlers.
Tires were made by Casey C.
Foams are Crawler Innovations Super Nova Comp Cut. 7.75'' Soft Front/ Medium Rear
Traxxas 3.5" Big Bore Shocks with RPM 2-Stage Pistons, Pink Mini T springs Front/Orange Rear, and Dlux big bore cap front/modified big bore shock caps Rear.
Weight holder system by Y Town Crawlers.
Lower Titanium links made by Jeremy Toney.
Upper Titanium links made by Purpmart.
Rowdy Racing Front Battery Tray
Holmes Hobbies 45T Crawlmaster Motors
BWD Delrin Motor Savers
x2 Robinson Racing 17T hardened pinions
x2 Holmes Hobbies Dual Mini BRXL's Castle Creation BEC
x2 Hitec 7980 Front Servo Hitec 7990 Rear Servo Robitronic Servo Horns
x2 Futaba R614FS receiver Futaba 4PK
4 pairs of Micro Deans plugs and 2 pairs of small receiver plugs, everything is wired to be modular so that any piece can be field tested or programmed individually. 3S or 4S lipo, depending on course needs
RTR Weight 6 Pounds



Thanks For watching!

Gavin Ayala is offline   Reply With Quote
Old 02-25-2019, 12:40 PM   #25
Fabricator
 
Gavin Ayala's Avatar
 
Join Date: Aug 2017
Location: Tyler
Posts: 309
Default Re: Ayala Metal Works YouTube Channel

Footage from the First NRRA RC Rock Bouncing Hill climb event that was at Bridgeport TX on February 23 2019. I was late to the start of hill one and missed a couple drivers. I was able to film the rest of hill one and hill 2. The Hill climb was based on fasted time wins, If driver rolls or drives out of bounds the run is over.



Thanks For Watching!
Gavin Ayala is offline   Reply With Quote
Old 02-28-2019, 11:14 AM   #26
Fabricator
 
Gavin Ayala's Avatar
 
Join Date: Aug 2017
Location: Tyler
Posts: 309
Default Re: Ayala Metal Works YouTube Channel

In this video I filmed my first Rock Bouncer event at Northwest OHV Park in Bridgeport Texas for the first race of the Southern Rock Racing Series 2019 Season. I was late to the first hill and missed more than half the drivers but still got a good view of last few drivers of hill 1. I walked around in between hill climbs and filmed some rock bouncers and trail rigs. I got a nice front row spot for hill 2 and filmed all the drivers. The hill climbs where very steep and the top 5 feet of the hills were vertical before the first Rock Bouncers climbed it.



Thanks For Watching!
Gavin Ayala is offline   Reply With Quote
Old 03-04-2019, 09:39 AM   #27
Fabricator
 
Gavin Ayala's Avatar
 
Join Date: Aug 2017
Location: Tyler
Posts: 309
Default Re: Ayala Metal Works YouTube Channel

I (Gavin Ayala) and my Dad Edmundo held a "Activated Outlaw" Get together on March 2nd 2019. We set up three Competition 4X4 courses at Children's park. Course 1 bowl, Course 2 Waterfall, Course 3 Stairway. We used Activated Outlaw Rule set so Start/Finish line, 5 minute time limit, 10 gates, Penalties= Reverse +1, vehicle physically Touched must return to Last Gate Cleared 10+, 44 maximum penalty points allowed per run or DNF minus progress. The weather was very cloudy, light mist and brisks temperature. After running everyone through all three course's we headed to the legrand house just a few minutes down the road from children's park. Edmundo and I set up three course's for Activated Small Tire shortly after arriving to the legrand house. Course 1 Tree Line, Course 2 G-Line, Course 3 Moss Line. We ran everyone that came and wanted to drive.





I would like to say Thank You to everyone that was at the Get Together! The next Activated Outlaw Get Together Will Be on April 6 2019 At White Oak City Park TX 9:30 AM Start. Address: White Oak City Park 500 E. Magnolia St White Oak, TX 75690

Gavin Ayala is offline   Reply With Quote
Old 04-03-2019, 10:28 AM   #28
Fabricator
 
Gavin Ayala's Avatar
 
Join Date: Aug 2017
Location: Tyler
Posts: 309
Default Re: Ayala Metal Works YouTube Channel

New Video of the Chuggy trail bouncing using RC4WD Mickey Thompson 1.9" Single Baja MTZ Scale Tire's that are Really worn! The front pair has been grooved through the center of the tire and the rear has been grooved for deeper lugs. All the tires have the inside lugs cut out for the softest tire.

The foams are Crawler Innovations/ Front Lil' Nova Dual Stage 4.25” Comp Cut Inner / Soft Outer SKU:CWR-2014 / Rear Lil' Nova Dual Stage 4.25” Comp Cut Inner / Medium Outer SKU:CWR-2015

Cherokee To Chuggy Build Thread Link:''Cherokee To Chuggy'',a AMW built SCX10 2

Cherokee To Chuggy" Specs: Custom tube chassis, running on 4S lipo 1600mah, Castle Creations MMP ESC, Castle 10A BEC, Tekin 13.5 Gen 3 brushless motor, Hitec 7954sh steering servo, Vanquish Products Currie Rock Jock Front/Rear, Traxxas Big Bore 3.5' Shocks front&rear with RPM 2 Stage Pistons(Green), Vanquish Products Method 1.9 bead locks,



Thanks For Watching

Last edited by Gavin Ayala; 04-03-2019 at 11:21 AM.
Gavin Ayala is offline   Reply With Quote
Old 04-03-2019, 11:19 AM   #29
Fabricator
 
Gavin Ayala's Avatar
 
Join Date: Aug 2017
Location: Tyler
Posts: 309
Default Re: Ayala Metal Works YouTube Channel

The Chuggy Back At The RedRock Pile Crawl Cut


A great drive with the Chuggy using the RC4WD Mickey Thompson 1.9" Single Baja MTZ Scale tire's.The front pair has been grooved through the center of the tire and the rear has been grooved for deeper lugs. All the tires have the inside lugs cut out for the softest tire which shows in the footage the back left tire was wrinkled. These tires did great and I was able to film/drive some of the hardest lines on the Red rock pile. The drive ended early when a lower link rod end that was worn pulled out of the pivot ball.

The foams are Crawler Innovations/ Front Lil' Nova Dual Stage 4.25 Comp Cut Inner / Soft Outer SKU:CWR-2014 / Rear Lil' Nova Dual Stage 4.25 Comp Cut Inner / Medium Outer SKU:CWR-2015

Cherokee To Chuggy Build Thread Link:''Cherokee To Chuggy'',a AMW built SCX10 2

Cherokee To Chuggy" Specs: Custom tube chassis, running on 4S lipo 1600mah, Castle Creations MMP ESC, Castle 10A BEC, Tekin 13.5 Gen 3 brushless motor, Hitec 7954sh steering servo, Vanquish Products Currie Rock Jock Front/Rear, Traxxas Big Bore 3.5' Shocks front&rear with RPM 2 Stage Pistons(Green), Vanquish Products Method 1.9 bead locks,



Thanks For Watching!
Gavin Ayala is offline   Reply With Quote
Old 04-09-2019, 11:25 AM   #30
Fabricator
 
Gavin Ayala's Avatar
 
Join Date: Aug 2017
Location: Tyler
Posts: 309
Default Re: Ayala Metal Works YouTube Channel

Activated Outlaw Get Together

My Dad Edmundo and I (Gavin Ayala) held a "Activated Outlaw" Get together on April 6 2019 at White Oak City Park. The weather was very gloomy and only a few humans showed up. I set up 3 Competition 4X4 course's that everyone was able to run and a Activated small tire class that we started and got more than half the trucks through before it started raining and everyone left. We cleaned up the course's and waited the rain and it did stop but the weather was still stormy so we called it early an left. Thank you to Jamie, Paul, and Edmundo for helping out with score & time keeping.Thank you Everyone That Came to the 3rd Activated Outlaw Get Together!



Thanks For Watching!

Last edited by Gavin Ayala; 04-09-2019 at 11:27 AM.
Gavin Ayala is offline   Reply With Quote
Old 04-28-2019, 09:29 AM   #31
Fabricator
 
Gavin Ayala's Avatar
 
Join Date: Aug 2017
Location: Tyler
Posts: 309
Default Re: Ayala Metal Works YouTube Channel

Rock Pile Relocation Crawl Cut With Myopic, The Gatekeeper, Blue Iris, and Black Cherry!

These giant Iron Ore red rocks were delivered 10+ years ago and made into the piles on the west side of the yard. You have seen these piles in the C.I. and AMW videos. We recently purchased an additional 36 yards of Iron Ore red rock and delivered it to the east-side of the property. We liked the location so much we rented a tractor and moved all the west-side Iron Ore red rock over to the east-side of our property on a slope creating even harder lines than before! We moved all the non Iron Ore rock over to our ultra4 track. As we moved rocks I took the opportunity to drive and film some of the interesting / difficult lines and share them with you.
Private Property Not Open To Public

Myopic Super Build Thread Link:"Myopic" A Super Agent XR-10 Build by Crawler Innovations

The Gatekeeper Build Thread Link:"The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw

Blue Iris Build Thread Link:"Blue Iris" A AMW Built Enigma Axle'd:Y Town Sporticus Chassis:Activated Outlaw

Black Cherry Build Thread Link:Gavin's Class 2 SORRCA Toyota Truggy reborn - the 3rd & 4th time now




Thanks For Watching!
Gavin Ayala is offline   Reply With Quote
Reply

Tags
#activatedoutlaw, #ayalametalworks, #crawlerinnovations, #doubledeucefoams, #lilnovafoams



Ayala Metal Works YouTube Channel - Similar Threads
Thread Thread Starter Forum Replies Last Post
"Forty One" by Ayala Metal Works for Crawler Innovations; 1.9 Ultra4 Nova's Ark 1.9 Scale Rigs 50 04-29-2019 12:07 PM
YouTube Channel JoeConti Videos! 0 04-17-2016 01:17 PM
my youtube channel Matty221133 Newbie General 0 05-12-2013 04:56 AM
YouTube Channel Lonnie Videos! 10 10-04-2009 06:12 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 06:55 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com