Been working on this for the last 2 months and I'm happy to say it's almost finished. It started off as a F350 warpig project then changed to a 1.9 Chevy and finally this. This is my second attempt at a crawler (first was a TXT super but since the class was cancelled I stopped building it) and my first scaler, I'm usually a monster truck guy.
First I have some folks I'd like to thank:
polyophio - K2-3L frame
Aipohaku - pede tranny
run2jeepn - stickers and "Dirty Deeds" motor
Red Rockcrawler - clocked Cs
pureadrenalin - OG tires, turned down tlt shocks, rectangular light housings, body trim, and other stuff I'm forgetting. Also thanks to Jerry for the advice when I needed it and just someone to shoot ideas off of.
Also to RCC and these folks for their threads which proved invaluable: microgoat, chino63, 1BadJeepBruiser, obijuan, BigBaller(also thanks for the encouragement), young_version, and the countless others I read through for ideas.
And thanks to all the Hawaii guys who have the bar raised so high around here that I had to give up all my free time for 2 months to try and keep up.
Now the specs:
K2-3L modded (~1/2 inch taken out of the center droop section)
pede tranny losked diff and spur w/ dirty deeds 55T motor
tlt axles w/ clocked Cs
Hybrid suspension: highlift leafs in front (chino mod) w/ 4 turned down tlt shocks); 4-link rear with stock tlts
Novak XRS esc
TQ-3 radio receiver, tower pro MG995 steering servos for steering and winch
Axial Rock Lizards narrowed and reduced on 1.9 highlift wheels
Clod body w/ 4x4x4 grille modded to GMC grille
And here's some pics:
First I have some folks I'd like to thank:
polyophio - K2-3L frame
Aipohaku - pede tranny
run2jeepn - stickers and "Dirty Deeds" motor
Red Rockcrawler - clocked Cs
pureadrenalin - OG tires, turned down tlt shocks, rectangular light housings, body trim, and other stuff I'm forgetting. Also thanks to Jerry for the advice when I needed it and just someone to shoot ideas off of.
Also to RCC and these folks for their threads which proved invaluable: microgoat, chino63, 1BadJeepBruiser, obijuan, BigBaller(also thanks for the encouragement), young_version, and the countless others I read through for ideas.
And thanks to all the Hawaii guys who have the bar raised so high around here that I had to give up all my free time for 2 months to try and keep up.
Now the specs:
K2-3L modded (~1/2 inch taken out of the center droop section)
pede tranny losked diff and spur w/ dirty deeds 55T motor
tlt axles w/ clocked Cs
Hybrid suspension: highlift leafs in front (chino mod) w/ 4 turned down tlt shocks); 4-link rear with stock tlts
Novak XRS esc
TQ-3 radio receiver, tower pro MG995 steering servos for steering and winch
Axial Rock Lizards narrowed and reduced on 1.9 highlift wheels
Clod body w/ 4x4x4 grille modded to GMC grille
And here's some pics:






