• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

♦♦♦♦ Project: Kirby (KOH/TTC Buggy) ♦♦♦♦

justinart24

I wanna be Dave
Joined
Feb 26, 2009
Messages
2,784
Location
Cowtown, USA
♦♦♦♦ Project: Kirby (KOH/TTC Buggy) ♦♦♦♦

koh-1.jpg

I have been wanting to build a full tuber for a while now, no more fixing cracks cabs.:oops: This rig will not be having IFS but just Axial axles. I also recently got a DX6i radio, plan on having some other fun channels to do some neat tricks.:mrgreen:This will also be my entry for 2011 Scale Nationals in Montana. Keep me in mind when voting comes up.;-)

My inspiration...
>>>CLICK HERE<<<

  • Axial AX10/SCX10 Axles
    • VP High Steering Knuckles Zero Acker
    • Axial Clocking C-Hubs
    • Super 300 CVDs
    • STRC Alum Axle Lockout
  • Suspension
    • New Era 4-Link Mounts
    • 4-Link Front and Rear
    • Proline Shocks
  • Drivetrain
    • MIP DriveShafts
    • Axial Trans with Alum case and all alum goodies
    • VP Hurtz Shifter 3 Position Dig
  • Electronics
    • Traxxas Velineon Brushless
    • Hitec 7950 Servo (Steering)
    • Hitec 5645 Winch Servo (Winch)
    • CCBEC
  • Body
    • Tube Chassis
  • Wheels and Tires
    • 2.2 RC4WD Rox Loxs
    • VP 2.2 SSZ-11 Clear
    • Nova Foams
 
I'm subscribed and looking forward to the results.
Thanks! "thumbsup"
Where's the build pics? What the F David blain?
There coming, just want to get the tube work just right.:mrgreen:
"thumbsup" THIS IS GOING TO BE SICK!
Thanks, I hope.;-)
can't wait.:flipoff:"thumbsup""thumbsup"
Me either."thumbsup"
I think it needs ifs but im sure that even with out it will still be killer as are all your builds..
Na, IFS is cool, just not fore me. BTW, thanks."thumbsup"
Cool, except that's not Kirby"thumbsup":mrgreen:
Thanks Mr Glassman. This rig is called Kirby because my childhood hero is Kirby Puckett."thumbsup"
You got my vote if you pull this off Justin "thumbsup"
Thanks man! I hope to make this sick enough to get your vote and others too.;-)"thumbsup""thumbsup"
 
I am unfortunately waiting on parts, so no real pics to post. I decided to mock the truck up in CATIA V5 to help with fitting all the electronics and etc. I designed the wheel base at 13” and body spec per the new rules. I am also thinking about running rear steer, just have to do some channel testing with my DX6i. Cool thing mocking it up in CATIA, I can print out the tube bends on paper for templates.:D

buggyrender.png
 
Back
Top