The SCX10 Bully Beast

[pmoss]

Check it out.... I had a lot of extra parts and decided to make something for the trails. "thumbsup" This is what I created. Tell me what you think. Sorry didn't do a build thread but, got as many pics as you need. LOL:mrgreen: I got a friend going to paint it and spruce it up a bit.

 

[pmoss]

Parts list is::shock:

-SCX10 Chassis
-Wraith Shocks
-Bully Axles w/ 12T pinion
-Axial 27t motors
-AE-2 ESC running 2s
-AJS Machine AJS3004 ESC mount
-Hitec 7954SH
-CCBEC
-Punk Dig
-Hobby King Receiver
-JR Battery tray
-Hilux Cab Doved w/ pinched front bumper/ w diamondplated lower cab guards
-Steel stinger front bumper
-Custom hilux fuel line cage
-Radio Shack electronics box turned in to a fuel tank
-custom rear shock tower/ spare tire mount
-Using Vanquish upper/ lower links
- riding on OTTSIX Shisms on Mayhem Rims (I love these things) I call them the "ShizNiks"
Next plan is to mount a WP/ BRXL and run 3s for a little more speed:twisted:

 

[OFFROADRCKOREA]

PMOSS,

Great build brother! Got that video up I took the other day!! Check it out!

<iframe width="560" height="315" src="//www.youtube.com/embed/Dswt01YgKfo" frameborder="0" allowfullscreen></iframe>

ORK

 

[pmoss]

Thanks...OffroadRCKorea for the video....and thanks for taking my orders for....Yep....the WP/BRXL with two Holmes Hobbies Crawler Master Experts 13T's. I got these things on my wraith running 4s runs good. VERY Low end control!"thumbsup"

 

[pmoss]

OK...first thing to break was the front of the cab at the lights. No big deal.
Can do.. Will take this time to start sanding down the cab too.....

 

[Postclanker]

The lace is a nice touch....:mrgreen:

Turned out nice...."thumbsup"

 

[pmoss]

LOL....it just sweetened the deal is all.....LOL No it is the wives dresser....threw it up there and snapped pictures. But yes it looks pretty....LOL:lmao:

 

[Postclanker]

LOL....it just sweetened the deal is all.....LOL No it is the wives dresser....threw it up there and snapped pictures. But yes it looks pretty....LOL:lmao:

Ha, I wasn't going to mention the perfume...but did wonder how the truck smells...:mrgreen:

 

[tjcj]

Sweet looking truggy what's the wheel base

 

[pmoss]

This thing is 15 1'/2in upright and 16in Squated.:mrgreen: It's got reach....LOL

 

[pmoss]

Ok..worked on the cab today. Putting the front clip back on. Dam wish i could just melt it back on. Lol Here is some of my glue work. First of only use Shoo Goo. Cement glue SUCK!

Sent from my SHV-E250S using Tapatalk

 

[pmoss]

Now i will let it harden then sand.

Sent from my SHV-E250S using Tapatalk

 

[pmoss]

Whoops! Almost forgot to post the other pics. This thing, as you can see flexes very good."thumbsup" Now that I'm looking at my pics....I think after the WP BRXL comes in I'll stick it all in a water tight fixture!

 

[pmoss]

Well.... while im waiting for my parts to come in....lets mount this motor up front.... :sly:



Ok' just need to cut a whole in the cab roof......


Sent from my SHV-E250S using Tapatalk

 

[pmoss]

Well among other things i went and got a small Rubber-maid Lock-its. Did a test fit and yet it will all fit. Also seen the videos of the never wet so i ordered me some of that too. Well see.



Sent from my SHV-E250S using Tapatalk

 

[OFFROADRCKOREA]

Lookin good brother, let me know if you want some beauty work done bud, 50 bucks! Haha! But seriously you know I want to make that thing pretty Goahead and drop it off at the ORK shop.

B