-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Let's see some MUD TRUCKS
- Thread starter jcsaxial
- Start date
Bogncrawl
Rock Crawler
Here's my 57' chevy
FATBOYrs10
RCC Addict
here's one I built
specs.....first off I will say this rig was built more so for looks than actual speed.
aluminum scale chassis rails
loaded and locked TLT axles
leaf sprung rear with traction links, radius armed front with coils and empty hightlift shocks
rc4wd r2 trans
1.9 cut boggers on 1.9 axial beadlocks w/MTHead rings
cheap servo for steering
cheap Tamiya silver can 540, AE2 esc, on 2s
and like I said, it was built more for looks than busting a mudhole WFO!
specs.....first off I will say this rig was built more so for looks than actual speed.
aluminum scale chassis rails
loaded and locked TLT axles
leaf sprung rear with traction links, radius armed front with coils and empty hightlift shocks
rc4wd r2 trans
1.9 cut boggers on 1.9 axial beadlocks w/MTHead rings
cheap servo for steering
cheap Tamiya silver can 540, AE2 esc, on 2s
and like I said, it was built more for looks than busting a mudhole WFO!
Last edited by a moderator:
lonleycreeper
I wanna be Dave
My outlaw, turned into more of a mega mud truck.
Running od/ud, gears in stock scx axles, bulletproof trans, VP housing, 80\20 gearing, 2or3s lipos w a 4000 kV hpi brush less system. No slipper. Build thread is under the pic.
http://www.rccrawler.com/forum/general-scale-talk/414982-outlaw-mud-truck.html
Running od/ud, gears in stock scx axles, bulletproof trans, VP housing, 80\20 gearing, 2or3s lipos w a 4000 kV hpi brush less system. No slipper. Build thread is under the pic.
http://www.rccrawler.com/forum/general-scale-talk/414982-outlaw-mud-truck.html
Last edited:
Calderwood
I wanna be Dave
I like that you asked everyone to post what running gear they have and not one person has. ;-)
Old one. Wish I never sold it.
Wheely King based. 3s. Cheapo brushed xl5 with cheapo closed can motors. The little guy flew (and was surprisingly indestructible).
Cool lookin truck! Which closed motors
HPI Fireballs 15T. You can buy them for under $15. If you smoke one... just throw it away.
On 3s they flew!
thisdougsforu
Quarry Creeper
Here's my mega. It's Crawford Performance Engineering (CPE) Barbarian based using Axial AR60 axials and an SCX10 transmission. I'm running Billings Custom Workz chopped clodbuster tires and CPE axial to tamiya adapters to run them. I'm currently running both open diffs by using HPI wheelie king internals. For power I have a Castle 4600kv system.
And how it's currently sitting.
Here's a few shots of other trucks from our first mud race:
And how it's currently sitting.
Here's a few shots of other trucks from our first mud race:
Last edited:
FATBOYrs10
RCC Addict
well, edited my og post, don't think it would be a setup that someone building a purpose built mud truck would use, but I posted the specs up for ya anyhow"thumbsup"
Bogncrawl
Rock Crawler
I was running a 7t puller and brxl but then swapped out for a vxl, drive train is bullet proof. But it has since been remolded to a trail truck.
How did you like the rc4wd tractor tires?
I'm on the hunt for some tractor style tires that will fit on 2.2 beadlocks. My thought is to run Vxl and titan motor but seems price wise the hpi may be the way to go!
pardonmyn00b
I wanna be Dave
Axial ESC and 20t motor
Cut 2.2 Boggers
Custom chassis with SCX-10 running gear
Last edited:
ROWDY RACING
I wanna be Dave
^^^Hey that's mine. :mrgreen:
WHITE-TRASH
I wanna be Dave
And I like that while you have a mega truck you posted without bothering to actually talk about it or include a pic.
My mega blazer.
As it sits now till I get the right 14mm adapters to run the above pictured tire/wheel combo.
Neither pic is current as I've changed the rear link/shock setup but it flat out works.
It's running a solar 772, SV3/5700 4 pole Castle setup with an all metal geared ax trans, MIP's, AR60's with craptastic alloy axial knuckles and C hubs and universal shafts. It's a fawking HOOT to drive, my absolute favorite rig to go bash on since the exo has taken to eating ring & pinions every damned run with the new motor & esc setup. :mrgreen:
