RC4WD Gelande II D110 Truck Kit w/Hard Body build/review

[HARDRIVE]

Damn twin turbo porsche
I can easily get one of that
Rc porsche hahahah

Not in to real cars
Much safer driving an rc lol
Altho i have a couple vehicle
Clk500
Tacoma
H2 sut
Good enough for having fun

Ey
Do you kniw any good hex tool set
I want to replace my tools
Its striping the heads lol

 

[-SCXD90-]

Damn twin turbo porsche
I can easily get one of that
Rc porsche hahahah

Not in to real cars
Much safer driving an rc lol
Altho i have a couple vehicle
Clk500
Tacoma
H2 sut
Good enough for having fun

Ey
Do you kniw any good hex tool set
I want to replace my tools
Its striping the heads lol

Wait you have a Benz, a Tacoma, and a hummer???????? Insurance and gas must be a pain in the patooty..... I mean I have a BMW 528i but it's a POS and hasn't moved under it's own power since August.... And it needs a new e39 (throttle body), a new starter, and a new alternator. And we pay full insurance for it.........


Look no further than MIP. I've heard nothing but greatness about MIP, quality tools, quality parts.

 

[HARDRIVE]

Yeah i have a benz hummer tacoma

Mip great i need a complete hex set

 

[-SCXD90-]

Yeah i have a benz hummer tacoma

I'm sorry, but can you give me your a street address and the location of the keys for the Benz? I'll post a pic when it's next to my '02 528i bimmer :lmao:

Mip great i need a complete hex set

They come in packs of 3 drivers I think. Should be a 1.0mm, a 1.5mm, and a 2.0mm. If you need a 2.5 or higher for the kit, just get a cheap set from a hardware store. I've rebuilt my scx10 over 50 times using a 1$ hex kit from Harbor Freight with no issues. I mean I cracked a 1.0 trying to take out a 3mmx16mm traxxas bolt out of 1/16" titanium sheet because I was trying to make a lower battery plate for my scx10 (I ended up using a popcorn bin and the stock battery plate lol)

 

[HARDRIVE]

No set of hex from mip? That sucks
I wanted a complete set with bag or something

 

[-SCXD90-]

What do you mean by "complete set"? Like a set of bolts and screws the the chassis or a complete set of drivers?

1.0, 1.5, and 2.0 IS a complete set..........it's all you'll need as far as I know....

 

[HARDRIVE]

Complete set of hex drives
I dont like buying piece by piece

 

[-SCXD90-]

Wth are you talking about?????

MIP Hex Driver Wrench Set, Metric (3) #9502

When I said "they come in 1.5, 2.0 and 2.5", I meant in a pack of 3 for $45 after tax

 

[HARDRIVE]

When i say set i meant all sizes lol
All hex drives they have in a set is what i meant

 

[-SCXD90-]

Like 1.0, 1.5, 2.0. 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5?


You'll only ever use 1.5, 2.0, and 2.5. Trust me, unless you get a fifth scale, 2.5 is the largest you'll ever need. When you say you want to get a "full set", 1.5, 2.0, and 2.5 is a full set. There is no need for anything larger or smaller. The only thing that would need anything smaller on a scale rig should be for scale accessories, and there is no need for anything larger, and MIP has a 1.0 if you need it......

 

[HARDRIVE]

Now that you put it that way
You are right i dont need any of those
Thanks
Im going to make my order today
Mip tools

 

[-SCXD90-]

Awesome. I've decided to get a spawn kit instead of a D110. I've always wanted a ar60 rig and $320 for the new kit is hard to beat. I told the guy at my lhs that I'm gunna buy it using 30,000 pennies and he said "ok but you're gunna sit there and count them all out before me so I know you're not missing any money."

LOOOOOOOL :lmao: "thumbsup"

 

[HARDRIVE]

Wahahahahahha lol that funny

Eh do you know where i can order a ln led lights i can directly plugged in on my reciever so i can turn it on and off from my controller

Im currently working on my bristolbay boat
Im going to use 12v 12ahh gelcell battery

 

[-SCXD90-]

Post up a picture of the whole boat dude! Looks pretty cool from that pic...

For the lights, get a 3channel radio and an Axial light kit. They're like $20 on eBay and they're pretty bright at 6.0V.

Now about those pennies....

 

[HARDRIVE]

Whahahahah you wasnt kidding when you said penny's lol

I remember this guy on youtube
They towed away his car and he paid pennys for it the lady didnt want to take so he called the cops
And she was forced to accept it since pennys are legal

 

[HARDRIVE]

Heres a bristolbay Aquacraft its an rtr 200 bucks
Im going to look for lights i can directly plugged in on my reciever

 

[-SCXD90-]

Whahahahah you wasnt kidding when you said penny's lol

No sir, I'm not kidding, just stretching the truth a bit. I'll throw in a few nickels or maybe a dime or 2 if he's lucky. LMAO

.....forced to accept it since pennys are legal currency...

I told him that, and he was like "hey man, the law's the law. If you want to give me 30,000 pennies, be my guest. But I'm sure as hell not counting them. I'll give you some room to count..."

 

[-SCXD90-]

Im going to look for lights i can directly plugged in on my receiver

Like I said, use an axial kit, or custom make one with your own bulbs. If you plug it into the 3rd channel and you don't have a switch to the 3rd channel, you'll have the lights remain on the whole time the receiver has power. That's how I run my lights on my Jeep, but on my Ram I'm going to put a toggle switch in the toolbox (the one that goes in the bed behind the cab, like this: https://www.google.com/search?q=beh...toolbox.com%2Fsaddle%2Fsaddle_box.htm;504;365 ) to turn the lights, So when I want the lights on I just hit the switch and they go on. I'm assuming you want the lights on the boat, so yes. A 3 channel radio will be your best bet, if you want a cheap one, I'm sure a noob to RC is selling a traxxas 3ch for $25 on fleabay.....

 

[HARDRIVE]

Ill be using a 6 channel radio
Thats why im looking for lights i can plugged in on the reciever
So i can turn it on and off with a flick of the switch

So far i didnt find any hahahah

 

[-SCXD90-]

If you have a 6 channel radio, your receiver should have 7 ports for different jtx plugs or whatever they're called. The first plug is for the servo. The second one is for the ESC. The 3rd, 4th, 5th, and 6th ports are for lights, winches, sound kits, and the like. The last one is for a BEC, which I'm sure you have one installed because you always should "thumbsup"

If you use a dual stick radio, there should be a 2 position switch for one of the channels. Find the corresponding plug for the 2 position switch. Then, you want to plug in a light kit to that channel. When the switch is in the off position, the lights will be, get ready for this, off! *audience applauds* :lol:
When the switch is in the on position, the lights will be- get this- on! LMAO.

Just buy a simple light kit or make your own, plug it in and have fun. When you hit that switch, the electric current stops traveling to the lights, which will turn off all power to them and they'll stay off. When you hit the switch, the current is completed, the lights go on. Simple concept, lengthy explanation.