• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

What did you do to/with your Ascender today

Took a sick day
eb536669b34a70aa59414e4cef7e8c0c.jpg
8ab5978d6abd822bd4f3808dfdbab2aa.jpg
c8f52f837c3fd8ffa070d1ee5790cb44.jpg
ae70e21219f6a1862d05fe855972bd7e.jpg



Sent from my iPhone using Tapatalk
 
That sucks man, it’s been low 70’s until yesterday. Today was low 50’s but I braved the weather and still got some play time


Sent from my iPhone using Tapatalk
 
a5e55c22d2d833f213c39a81c93267ff.jpg
c864d1175712fa5f65f786656341a27c.jpg
92194961fdbebf396beb3df9a816dfce.jpg


Finally got my Scalerfab rock sliders in. Look great on the truck. Going to have to clearance them so the tires don’t rub and full lock and compression. Thinking cutting them at the red line.


Sent from my iPhone using Tapatalk
 
BrokeBob said:
a5e55c22d2d833f213c39a81c93267ff.jpg
c864d1175712fa5f65f786656341a27c.jpg
92194961fdbebf396beb3df9a816dfce.jpg


Finally got my Scalerfab rock sliders in. Look great on the truck. Going to have to clearance them so the tires don’t rub and full lock and compression. Thinking cutting them at the red line.


Sent from my iPhone using Tapatalk
Click to expand...
Can you swap them side to side? Looks like you can avoid cutting them that way.

Sent from my SM-G930V using Tapatalk
 
Ascender'nMN84 said:
Can you swap them side to side? Looks like you can avoid cutting them that way.

Sent from my SM-G930V using Tapatalk
Click to expand...



I could. But then they don’t line up with the body well and can’t use the front and rear holes for the battery and upper link mounts.


Sent from my iPhone using Tapatalk
 
I'm not a pinch guy, but your nose/hood pinch turned out very nicely, bed bob looks great! I was going to say swap the sliders side to side too, I ran my Codyboy sliders forward on my K10, but soon found better to have little more clearance up front and the extra slider under the cage/bed sides really helps. That way rocks don't catch between slider and rear tires, while allowing steering/flex clearance. Weird they don't line up proper when swapped. Build is coming along very nicely! :)
 
I broke the pin on my driveshaft and didn’t feel like spending $60 for mips so had some traxxas ones laying around and they are a little to thick. Found some arrma ones and they are just about perfect. I had to grind a mm or 2 off the end. It fit through the barrel just fine but had to drill out the cup just a hair and it fits perfect. I think the arrma ones were about $5.
b4ddeadff72381b72bf3c42102254fe8.jpg
fb4eccbbac8ced2c5612c42d2efa1949.jpg



Sent from my iPhone using Tapatalk
 
I outboarded my shocks using Traxxas longer bolts p/n 2592 and some 3mm flat washers.
9838b34967e2df229dca35f3653868b2.jpg


Sent from my SM-G955U using Tapatalk
 
Had some of these laying around that I never used and they look pretty close in length as the stock shock shafts. Does anyone know if they will work. I won’t be able to use the Ascender pistons unless I drill the center out and use a clip to hold it in place. I guess the only benefit would be they have the nitrate coating so less stiction and they would look cool with the gold coating.


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.

Similar threads

P
PileDriver's H10 Kit
Replies
5
Views
770
B-MOW71
B-MOW71
Thloftus
Thloftus' Phoenix Rising
Replies
19
Views
1K
Thloftus
Thloftus
high plains drifter
Tow rig conversion and trailer build
2
Replies
21
Views
3K
Goro Majima
G
T
Perfect for me Capra without new transmission
Replies
0
Views
1K
TopperMcFly
T
J
What did you do to your TRX-6 today?
2 3
Replies
48
Views
13K
Jeff6x6
J
Back
Top