2 speed with 2wd\4wd?

[hnoroian]

It would be squishy with available room on the frame on 1.9’s (2.2’s have just a bit more room to play with) but a double dig unit similar to a doubler on 1:1.

 

[Fallen]

Axial SCX10 III Bronco + SSD Manual Locking Hubs.

It includes everything needed to make the transmission 2 speed. And it already has the axles that the locking hubs fit in.

2 speed with selectable 2WD / 4WD.

I've seriously been considering upgrading mine to brushless / sensored because it's that much fun at speed. Or maybe I'll just gear up... probably cheaper.

 

[DRED805]

Axial SCX10 III Bronco + SSD Manual Locking Hubs.

It includes everything needed to make the transmission 2 speed. And it already has the axles that the locking hubs fit in.

2 speed with selectable 2WD / 4WD.

I've seriously been considering upgrading mine to brushless / sensored because it's that much fun at speed. Or maybe I'll just gear up... probably cheaper.

Are you sure they work with 10.3 straight axles?... I was under the impression they only worked with the offset ssd axle housings. the 10.3 axles are more offset than the ssd's. I would love to be able to use them with my VFD twins, to make 2wd work better, but ssd axles aren't offset enough.

 

[Fallen]

Oh yeah, my Bronco has the stock 10.3 straight axles.

I put the SSD Manual Locking hubs in mine, and they work great.

These are what I used:

PARTS FOR SCX10 IIIManual Locking Hubs for SCX10 III Straight Axle

 

[DRED805]

Oh yeah, my Bronco has the stock 10.3 straight axles.

I put the SSD Manual Locking hubs in mine, and they work great.

These are what I used:

PARTS FOR SCX10 IIIManual Locking Hubs for SCX10 III Straight Axle

Noted. Thanks!

Anyone know if they'll work in Vanquish offset axles?

 

[Kapti]

I think I have what you need if you want a TRX with 2WD 4WD t-case. Check out Ampro Engineering's install video. https://youtu.be/IvJH1Fw5dPM.

 

[TooOldForThis]

I think I have what you need if you want a TRX with 2WD 4WD t-case. Check out Ampro Engineering's install video. https://youtu.be/IvJH1Fw5dPM.

Yes! It looks like he has a website coming soon for it. This is something I've been interested in for years, remote selectable 4WD in a TRX4. Very excited that something will be available.

https://kaptimachine.zohosites.com/

 

[Rcflyer40t]

There's a discord with photos too. Trx4 transfer case upgrade. https://discord.gg/eRrdUwuxVa

Following. I’d love to have this setup in my current & next scale build.

And to go 1 step farther, I think it’s be cool to have Remote locking rear diff, 2WD/4WD AND a 2speed. Probably asking too much but it would definitely be cool. I’m not even sure if you could fit that all in one transmission readily available on the market right now.

[mention]Panther6834 [/mention] how do you do 2WD/4WD on a TRX4 trans? I need to know for research purposes…lol
__________________
Amain Addict

For your research, we have solution for you. :ror:

 

[Goro Majima]

^ I can't wait til those are available!

 

[ScaleLifeNewbie]

There's a discord with photos too. Trx4 transfer case upgrade.



For your research, we have solution for you. :ror:

Now that is a legitimate 2WD/4WD trx4 trans! unlike what Mr. Whiskers tried to say was….


Sent from my iPhone using Tapatalk

 

[mulchman]

This is one of the options I like the most about my Traction Hobby Cragsman.

 

[ussprinceton2004]

4x4 doesn't do well in doing donuts. My attempt

<iframe width="560" height="315" src="https://www.youtube.com/embed/0ykfb2xWH_A" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

 

[ussprinceton2004]

another attempt at doing donuts w/ a 4x4

<iframe width="560" height="315" src="https://www.youtube.com/embed/YGU5ZM5pOII" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

 

[AK KRAWLER]

This is one of the options I like the most about my Traction Hobby Cragsman.

I still think the Cragsman looks like a fine machine, just cant sustain the cost, yet...

 

[ussprinceton2004]

doing donuts, but its 2WD

<iframe width="560" height="315" src="https://www.youtube.com/embed/cFQH-1qnSwU" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>