Axial AX-10 Picture archive - No talking

[BC Racing]

The latest incarnation of my rig.....

 

[fallin apart]

fallin aparts ax10

ax10 with novak 55t motor and esc, bent lower links, hb rover tires, hi tech steering servo, vw body and traxxas 3ch. radio

 

[tatt2guy]

I have only owned this truck about 4 days, won it in a contest from the LHS, RTR, not ready to crawl.... I am making changes as quickly as I can, the first to get replaced was all that plastic crap, and the POS motor......Diff lock, Tranny mirror, Foams cut, Wheels drilled, All aluminum Kit, plus new servo gears, and horn......

 

[JustinThyme]

I started out with an ARTR AX-10 and did a couple minor upgrades:

Then I upgraded to Underground Crawlers Fastback chassis:

and after a few more upgrades, this is where I stand now:

Semper Fi!

 

[JSinAlaska]

 

[TedBull]

Here is my AX10 and a list of mods. (Some mods not pictured)


Axial AX10 scorpion ARTR kit.
Gatekeeper chassis kit.
integy aluminum wheels
integy aluminum transmission housing
VF/DNA dig unit with Steel internals
All robinson racing metal gears with plastic spur
MIP drive shafts CVD
MIP axle shafts CVD
Aluminum C hubs and knuckles
Aluminum Rear axle lockouts and steel driveshafts
Integy HD pinion and bevel gears.
Titanuim lockers
HItec digital steering servo with titanum gears(ultra tourge)
Hitec might mini dig servo
axial aluminum steering links
Slick sleeves
spektrum DX3R and receiver
Losi aluminum 4" comp shocks
Novak crawler motor 18.5
Novak crawler goat ESC
Motor mount with cooling fins
Novak fan on esc
2 Max Amps 2S LIPO's 2000 Mah
carbon fiber battery mount with REI strap.
Losi Grappler body
HB Rover tires (White)
HR slipper clutch removal kit.
Losi Night Crawler LED Light kit.
Aluminum steering servo horn

 

[axialchevy]

my ax10 ive had since march its my first crawler build

 

[tech126]

Soon to have a bronco body:

soon to have a t runner body and upgraded electronics

Soon to have a hi Lux or Cherokee body

All purchased off of the local craigslist for cheap

 

[Yama86]

Here's mine so far:
AX10 kit
SWX chassis
Losi Shocks
Losi tires (Now swapped to Panther Leopards)
VP DH Comps
VP Hurst Dig with Mighty Mini Servo
4-link rear
Bug Body
Mamba Max
CC Bec set to 6V
Hitec 7955
HH 45T Motor
1300 Mah 11.1v 3s LiPo
DX3R

 

[mowgli420]

here are some great pics of my ax10 scorpion rtc with 55t moter and 90t spur as well a 13t pinion. the tires are imex all-t dawg tires and are 5.5" tall and 3" wide hope you enjoy my pics "thumbsup"

 

[irok22s]

My 2 axial based rigs

 

[crfnick56]

Here she is "thumbsup"

 

[fourxlow]

My ax10 ARTR
Complete budget build mod list:
Homemade dig
Stick on wheel weights in all wheels (18oz front & 10oz rear)
Proline chisel tires
Center skid plate modified to move lower links inboard
Shock limiters inside & outside shockbodies (team associated plastic shock internal spacers)
Team associated rear shock springs (blue front & red left rear gold right rear)
Tekin FXR & Tekin 55 turn
Hi tech mg servo

Front axle aluminum upgrades to come.
Not a full blown comp rig, but gets the job done. Lots of fun! "thumbsup"

 

[jeffmhopkins]

Just put on my JConcepts Gate Crasher Body on, as well as some bent linkages.... the paint is actually black with gold flecks, it really shines in the sunlight. Raining outside right now hence quilt pic.

 

[drgrcr74]

Heres my rig, and all the essential information.

Gatekeeper Chassis, with custom made links
CKRC behind axle steering
CKRC high steer knuckles
DNA Dig
TCS boomerang 4 link mount
CCBEC
Tekin FX-R ESC
Hand wound motor
Airtronics 94780 steering servo
Hitec hs-645 dig servo
Spektrum DX3-R
Spektrum S3300T

 

[PhantomRS10]

Trail ready:ror:.... Bronco with all scale proline stuff. Diff wheel package as well

It takes about 20-30 mins to change everything back to this setup Lol

 

[RCchomp]

Scorpion with entire collection: E-Revo (MMM), Slash (MMM), Rally XLT, & Micro-T

 

[charleshermanpipesjr]

my ax10 rtc

started out as a rtc but ive modded with longer shocks it gets more the 100 degrees of flex when twisted by hand but will flex about 75-80 on its own with all four on the ground, four wheel steering costom high clearance steering in the front,traxxas half shafts which are stronger,xl5 speed control, 27 turn epic silver can motor geared 13/87 and a tower hobbies 7/8 channel receiver for the rear steer and future front and rear dig unit. 5 oz. of 3/8" airsoft bbs in each front tire,star cut foams in rear with grooved hammers,every other lug all the way across in rear and every other outer lug in the front, 10th scale bolink baja bug body painted pearl purple with silver backing stock servos for now as im still in the testing phase of my build

 

[creepr69]

ax10

my latest ax10.all blue links. bent lower links. 4 link uppers.dynamite blue chassis side plates.flipped blue aluminum shocks.intergy 55 turn motor mounted to a clodbuster adjustable motor mount with 10 tooth pinion.hot racing dig unit.traxxas 2.4ghz 3 channel rx&tx.new proline bug body.hb rovers.hitec 645 dig servo.200 in oz. steering servo. "thumbsup"

 

[Wicked Klown]

Mayham double phattys, rears are delrin, Double Deuce Nova foams, Rover white dots, MIP CVDs, MIP Driveshafts, Sportwerks shocks. CC BEC, CC Mamba Max, Hitec HS-7955MG, HH 7t Colbalt Puller motor, VP Zero Ackermann knuckles, Jones'N BTA, Spektrum DX3E. Runnnig a DNA SlingShot chassis with Delrin lower and upper links.