Axial AX-10 Picture archive - No talking

[mjsjeep]

AX-10 jeep...8)

 

[mjsjeep]

AX-10 jeep..I think it turned out really cool...8)

 

[bunson70]

Need help!! How do I add pictures?:roll:

 

[waggaclint]

Need help!! How do I add pictures?:roll:

Try imageshack or photobucket

 

[C*H*U*D]

Need help!! How do I add pictures?:roll:

http://www.rccrawler.com/forum/comments-suggestions-help/28164-posting-pics-dummies.html

 

[bunson70]

Thank you C*H*U*D! I read a little here on my break. I will finish later when I can get on my laptop.

 

[C*H*U*D]

Thank you C*H*U*D! I read a little here on my break. I will finish later when I can get on my laptop.

Of course now we expect pictures "thumbsup"

 

[custom scorpion]

my girl, loaded with upgrades, and changing every day...
Stock Chassis
30 degree lower links
venom aluminum battery tray mounts
VP hurtz 3 position dig
GH racing aluminum solid axles
integy drive shafts
HR piggyback shocks
integy y arms
axial 2.2 rockster beadlocks(x2) one set of HB rovers, one set of proline flatirons
GH aluminum skid plate
55t axial
12mm aluminum hubs
dynamite ECX 1070 esc
spektrum DX3E receiver and controller
airtronics servos
So much more, just can't remember it all right now...

 

[IndyHobbies.com]

Here's my Axial Scorpion. Picked it up off of ebay a few years ago, just about new. I've had more fun with this R/C than just about any including planes, boats and on/off road vehicles!

Same chassis, different body. I have my "go" body and my "show" body.

 

[Huggy Bear]

Here is my AX-10. Going to build a nice carbon fiber chassis at work when I get a chance!

 

[Huggy Bear]

Updated picture of my junk beast!

 

[R_2]

My sportman comp rig
-Tomy`s/ Nordic Crawler Desing chassis ( me like8) )
-Tekin FXR / 35T handwound
-Hitec 7954
-OD/UD
-Stock drivesafts, wheels (narrowed), tranny
-bunch of bits and pieces made with file and hacksaw, knuckle/axle weights (from lead), servo/batteryplates, 4-link etc...

 

[Robinator]

Hello all, first post here and here are the details.
Stock chassis, Novak goat esc and brushed motor, four wheel steer with Axial BTA front and rear, internal springs in standard shocks and locked diffs. Upgrades to come fitting a CC BEC to keep the power up to both servos and fitting a set of Sedonas. Cheers Rob

 

[Jgraser1]

My First RC Crawler

First crawler ive ever built, Axial AX10
TCS XTRAIL Scale Chassis Kit
Axial 27t
Savox SC0251
Tekin ESC
Losi Spektrum

Its a little goofy looking with the cage in the back and the 50's chevy body but i like it because its different

 

[CabooseWa]

 

[xibriz]

My electric Axial monster

 

[K-Note72]

I got this one used just recently and it's not the most unique ax-10, but it's just what I was looking for in it.

-35A esc
-1200kv motor
-compact 2s 1300mah lipo
-all at a great price!

 

[Robinator]

Well got the upgrades, now sporting Sedonas, got the BEC running both servos. Now fitted with a custom DMG ALT top chassis (thanks Gerry) side plates are very high tech; made from a 5 litre oil container. Bits on order are 20kg servo and Junfac 13mm wide hubs. Cheers.

 

[RootBreaker]

mostly stock....

except RTR Plastic links replaced with all thread and brake line..
4 link front by Carbon fiber front servo mount - re-drilled to shift servo to side to make room for eventual lipo up front
Axial 4 link plate in rear
ae-2 esc upgrade to gain a brake
27T motor (got this RTR used and had a 19T in it)
drilled a hole in each rim to get air out
radio shack box between back shocks for electronics - limits rear flex some when rear shifts and hits box against rear shocsk.. backyard basher so this is ok with me....

not so great flexing..
drilled hole in each inner part of rim.. just one small hole... made a world of difference....
also cut body up... height wise and made new holes in the body
cut front fenders, bumper and rear out more to allow flex..

Dolls (1 of 4) by TeleFragger / RootBreaker, on Flickr


Dolls (2 of 4) by TeleFragger / RootBreaker, on Flickr



crew arguing over who is going to take "Red Dawg" out next


Dolls (3 of 4) by TeleFragger / RootBreaker, on Flickr


has a little more flex than this still left....

Dolls (4 of 4) by TeleFragger / RootBreaker, on Flickr

 

[Cpt Nemo]

TCS X-Trail