-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Harley's TCS X-Trail
- Thread starter Harley
- Start date
countryboy4life
Quarry Creeper
awesome. which chassis is that long or short. i'm planning on getting a ax10 for x-mas. i guess i need to get some money and get me one."thumbsup"
Scooteracing
Quarry Creeper
If your using the X-Trail, mount a plate across the frame by the trans and mount the electronics there. Look at the pic on page 11. thanks
They should be ready any day now guys.
I believe the first available units will be natural aluminum and the black anodized ones will follow shortly after. I think this is the case anyway.
I believe the first available units will be natural aluminum and the black anodized ones will follow shortly after. I think this is the case anyway.
Scooteracing
Quarry Creeper
Come on guys there are more prototypes for sale at The Crawler Store. Lets get more builds going."thumbsup"
Definately!!
I want to see more of your build though... What body are you going to run?
GreenRiver
Quarry Creeper
Waiting on mine to build! Nluvwithxlr8ing, how is your Delrin chassis holding up?
Awesome so far!
Scooteracing
Quarry Creeper
I'm wanting some rock claws the RL stink. I have some M2K's right now and I plan on running a yota cab once I get the aluminum version. Right now I will most likely run a jeep body.
72Blazer
Rock Crawler
I'm always a day late.They are gone now.I would like to have gotten one of those X-Trails protos for my sons scale build.Going to use a Pede tranny with TLT axles.
Looks like a great chassis.May ending getting a production version when thay are available.
countryboy4life
Quarry Creeper
this sucks.:evil: tcs is out of the short and long and i was gonna get one this thursday or friday. someone pm me when either one of them comes in please thanks.
Scooteracing
Quarry Creeper
Well, I'm glad to see all the prototype sold out. I believe we should see the real deal soon guys. I myself can't wait for the aluminum one. The prototype is awesome, I just want to see the aluminum version.
'04 Rubicon
Rock Crawler
Here is what I came up with for now, and the link to the build - http://www.rccrawler.com/forum/showthread.php?t=85910&highlight=tcs .
Attachments
Last edited:
wshipley
Pebble Pounder
Here are a few shot of my X-Trail Prototype:
AX-10 Kit
Novak Rooster Crawler Ed. ESC
Spektrum RX
Hitec 645mg Servo w/ Alum. Horn
55 Turn Brushed Crawler Motor
Elite 1500 6 Cell Battery
Duratrax EVBX Front Shocks w/ Extra Soft Springs
Tamiya Rock Crusher M/T Tires
Tamiya High Lift Rims
Alum. Spacers
1/8" Alum. Sheet for the Electronics Tray
Still waiting on:
1.9 Mudslinger Tires
HPI Stock Car Rims
TSS 1.9 Rock Rings
ClodBuster Body
TSS Clod Bumper w/ Fairlead
Servo Wench.
AX-10 Kit
Novak Rooster Crawler Ed. ESC
Spektrum RX
Hitec 645mg Servo w/ Alum. Horn
55 Turn Brushed Crawler Motor
Elite 1500 6 Cell Battery
Duratrax EVBX Front Shocks w/ Extra Soft Springs
Tamiya Rock Crusher M/T Tires
Tamiya High Lift Rims
Alum. Spacers
1/8" Alum. Sheet for the Electronics Tray
Still waiting on:
1.9 Mudslinger Tires
HPI Stock Car Rims
TSS 1.9 Rock Rings
ClodBuster Body
TSS Clod Bumper w/ Fairlead
Servo Wench.
Attachments
Looks great! What shocks did you end up using?
wshipley
Pebble Pounder
Here is the Link:
Shocks:
http://www2.towerhobbies.com/cgi-bin...?&I=LXCXS3&P=7
SPECS: Length: 3.36" (85.36mm)
Springs:
http://www2.towerhobbies.com/cgi-bin...I=DTXC9261&P=K
SPECS: Length: 2.52" (64.11mm)
w/ the extra soft springs they come out to 2 7/8" installed.
Shocks:
http://www2.towerhobbies.com/cgi-bin...?&I=LXCXS3&P=7
SPECS: Length: 3.36" (85.36mm)
Springs:
http://www2.towerhobbies.com/cgi-bin...I=DTXC9261&P=K
SPECS: Length: 2.52" (64.11mm)
w/ the extra soft springs they come out to 2 7/8" installed.
kevinlongisland
The Wheels Keep Turning
Scooteracing, looking good. Nice build.
Full aluminum release of un-finished (not anodized) will be soon. I hope I get them before I leave for the Mid-West event this weekend.
I just put a few XTS proto's up on the store. Don't know why I had two laying around and they weren't in inventory! :shock:
'04 Rubicon, trucks looking good!
Wes, nice clean build.
A local friend is making up a servo mount that installs up in the chassis for a more scale look. We might do production of these as well. But I'm not sure yet.
Full aluminum release of un-finished (not anodized) will be soon. I hope I get them before I leave for the Mid-West event this weekend.
I just put a few XTS proto's up on the store. Don't know why I had two laying around and they weren't in inventory! :shock:
'04 Rubicon, trucks looking good!
Wes, nice clean build.
A local friend is making up a servo mount that installs up in the chassis for a more scale look. We might do production of these as well. But I'm not sure yet.
