GreenRiver
Quarry Creeper
I am slowly building up my prototype... Very impressed so far though I am at a stand-still without any axles and tranny.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Harley's TCS X-Trail
- Thread starter Harley
- Start date
moparmuscleman
Newbie
?
hi is this chassi really good for scale looking rigs but would it look good with 2.2 wheels and tires on i don't like the 1.9s they look too small and the axles look huge compared to them.
i like how the rigs look and who it make the rig more scaler to me.
does the chassi have good articliation?
hi is this chassi really good for scale looking rigs but would it look good with 2.2 wheels and tires on i don't like the 1.9s they look too small and the axles look huge compared to them.
i like how the rigs look and who it make the rig more scaler to me.
does the chassi have good articliation?
The chassis can be setup with whatever rims and tires you want. The 1.9s are just used because they are more to scale then 2.2 rims on most all bodies we run. Articulation is based on whatever shocks you use and how you have them placed.
moparmuscleman
Newbie
thanks when would the real chassi not prototype be out on the market because i'm thinking aboyut buying one and what would the cost be . thanks
Chassis' have come in, they are being anodized right now. The bare aluminum just wasn't up to TCS standards. The anodizing will make them look extra sharp for all of you.
Final cost will be in as soon as the they are back from anodizing.
Soon guys, thanks everyone for being patient. These will be worth the wait, and they perform as good as they look.
Final cost will be in as soon as the they are back from anodizing.
Soon guys, thanks everyone for being patient. These will be worth the wait, and they perform as good as they look.
moparmuscleman
Newbie
thanks is there a way i could buy it for you because tcs site won't let me do email or even sign in because of some cookies thing?
That is just a problem with your internet browser. Don't worry though, if you want one you will get one "thumbsup"
I will try and post as soon as I know when they will be back from the coater.
I will try and post as soon as I know when they will be back from the coater.
moparmuscleman
Newbie
ok thanks harley "thumbsup"
'04 Rubicon
Rock Crawler
Thanks for keeping us updated on the aluminum chassis. I'll fall in line for it when the ordering starts.
Still no clues or hints on what kind of chassis parts are coming, give us something.;-) A servo mount maybe? What else??
A hardware kit will be available soon too. The kit will include some some longer bolts that can be used on the shock mounts and some various other hardware pieces. Details on the hardware will come later.
The ETA as of right now is 11/06/07, this is an estimate of course though. The first batch is already at the coaters and more have been ordered.
Order yours now so you can get in on the first batch"thumbsup"
Everyone has been great with the positive comments and we hope that you will all be very happy with your new TCS X-Trail.
Any questions feel free to PM me with your question and e-mail address. I can respond much faster to e-mails then I can PM's.
Thanks again!
The ETA as of right now is 11/06/07, this is an estimate of course though. The first batch is already at the coaters and more have been ordered.
Order yours now so you can get in on the first batch"thumbsup"
Everyone has been great with the positive comments and we hope that you will all be very happy with your new TCS X-Trail.
Any questions feel free to PM me with your question and e-mail address. I can respond much faster to e-mails then I can PM's.
Thanks again!
Juan Cortez
Newbie
Thanks for the information, I went ahead and got me one. 
Got my aluminum version (unfinished) Friday :twisted: The rebuild starts tonight. Keep an eye on my build thread to be the first to see the completed X Trail "thumbsup"
http://www.rccrawler.com/forum/showthread.php?t=86124
http://www.rccrawler.com/forum/showthread.php?t=86124
We are are in the early stages on some pretty cool parts for the X-Trail and the Axial in general.
And someone said something earlier about a servo mount, yes one will be available soon. It was in prototyping last I checked. I do not know the details on it yet other then it is for chassis mounting the servo (I was not the designer on this piece). As soon as I do know I will update all of you.
Glad to see you guys pre-ordering, it should not be a long wait.
And someone said something earlier about a servo mount, yes one will be available soon. It was in prototyping last I checked. I do not know the details on it yet other then it is for chassis mounting the servo (I was not the designer on this piece). As soon as I do know I will update all of you.
Glad to see you guys pre-ordering, it should not be a long wait.
muddzillatx
Newbie
im really likin the look of this frame..im already makin christmas lists lol..its a mile long
Juan Cortez
Newbie
I understand that there are 2 ore 3 different frame sizes,
I pre order mine, but there was nothing to let them know which one I want.
How will you guys be working the specifics ?
I pre order mine, but there was nothing to let them know which one I want.
How will you guys be working the specifics ?
AMorgan
Rock Stacker
Thats freaking sweet. I've been considering an AX10 for a while and this may be just enough to push me over the edge.
Juan, there are two different lengths. The X-Trail is the one available for pre-order right now, the XTS (shorter version) is not available yet except in prototype.
AX-10's are in stock still, just get the whole package :lol:
