• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

motor and esc for a xl kit

First off let me start off by saying I am new to the RC world and am about to buy a Yeti XL kit. I am considering three motors and esc's. 1. Mamba monster 1/8 2200kv. 2. Tekin TT2325 2250kv with the RX8. 3. Novak Activ8 2200kv with the V2/HD8 esc. (The Novak is not releasing until March.) With that said I plan on running 4s batteries and like the Mamba and Novak versions because the esc's are sealed. I really want the Tekin but I would have to be careful to keep it dry. What I am hoping for is feedback from other would be XL kit builders/owners to chime in on what they plan on installing. Im also interested in hearing about servo considerations.
 
ednerin said:
The Vanguard 2200kv set up with the RTR is good however if I had to choose I'd run the CC MM2 due to the adjustable BEC with the 1515 2200kv motor which is the same as the RTR just a better ESC IMO."thumbsup"

Mamba-Monster-2-ESC-on-metal-2-325.jpg
Click to expand...


Can the BEC on the MM2 deliver enough current to support a high torque servo (like a Hitec HSB 9380TH) without an external BEC? Thanks
 
You will need a external BEC regardless of the ESC you use. The Tekin RX8 will support 7.4v I believe but it's still recommended to run an external BEC.
 
sanny that 1900kv is a buggy motor...recommend a truggy or 4038 style from tekin .... I actually purchased the 4038 motor in 1700kv and plan to run double 5s lipos...."thumbsup"
 
Cafeful, I just got blasted for suggesting this ESC a few days ago lol.

Seems folks on this forum have made their mind up and will not try Hobbywing.

Up until a year ago I was a Castle fanboy and I had a reason. Because they work great. I was a little tight last year and tried a Hobbywing Xerun 150a and all I can say is wow! It blew me away with its powerful internal BEC and smooth powerband on even sensorless motors. I had to fine tune my Mamba Monster 2 to run without cogging, but the Xerun 150 worked great right out of the box. Ran cooler too!

Only time will tell if the Hobbywing stuff will hold up long term,but for now I am planning to install the motor combo below in my Axial Yeti XL kit.

Free SHIP Neucastle 1515 1 8 Brushless Motor 2200KV Hobbywing Quicrun WP 8BL150 | eBay

my rc fleet
Losi xxxscb - Castle SCT 3800kv
Losi scte2.0 - Castle MMP 2400kv
Ofna GTP2e - Castle MM2 2650kv
Associated RC8.2e - Castle MM2 2200kv
Associated Rival Monster truck - Hobbywing Xerun 150a with Ripper 2000kv
Associted SC8.2E - Hobbywing Xerun 150a with Castle 2200kv
Soon to own Axial yeti XL kit - Hobbywing Quicrun with Castle 2200kv
 
Last edited:
twin trunigy 3000mah 5s 30-40c burst thru gen2 esc powering Tekin 4038 1700kv .... Robinson gen3 slipper 56T with 18 19 20 21 22 23 and 24T spurs...idk what gearing ill use but it should be strong
 
i got a new used viper esc the vx8 i think it called what viper motor to pick up for a 4 s pack running
 
i got a new used viper esc the vx8 i think it called what viper motor to pick up for a 4 s pack running
 
You must log in or register to reply here.

Similar threads

A
Anybody have experience with the meus ifs kit?
Replies
3
Views
141
NWCT24CRAWL
N
J
External bec on axial yeti xl
Replies
4
Views
242
ferp420
F
M
ESC question
Replies
1
Views
136
ferp420
F
P
PileDriver's H10 Kit
Replies
5
Views
678
B-MOW71
B-MOW71
Q
Vanquish Phoenix Portal Kit Came With Wrong Wheels!
Replies
12
Views
449
OutLore
OutLore
Back
Top