Highlucks
Try to Bend it
They are 2.2 BFG's so tyre specs will be easily found.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
New Axial "working on something fast"
- Thread starter STANG KILLA SS
- Start date
JohnB
Quarry Creeper
2.2" x 5.5" (56mm x 140mm), 1.95" width (50mm)
Twiztid Metal
Rock Crawler
Harley has them on his fb page.
Sent from my XT1031 using Tapatalk
Sent from my XT1031 using Tapatalk
Calderwood
I wanna be Dave
Where did you see that?
Dusty_G
Newbie
FYI - The Moderators have made a thread for the Yeti -- Let the fun begin.
Scale Rigs Brand Specific Tech - Axial Yeti at RCCrawler.com
Scale Rigs Brand Specific Tech - Axial Yeti at RCCrawler.com
Yep. "thumbsup" And check out my review of the Yeti posted on the home page in case you haven't already seen it.
http://www.rccrawler.com/forum/axial-yeti/499050-exclusive-review-axial-yeti-ax90026.html
monkeyracer
I wanna be Dave
So this is exactly what I posted up a while back that they would do:
Back in early April:
Called it almost to a T... was only wrong on the trans and motor.
The tacon cage only needs two body clips and the cage flips up to access everything below it:
Coincidence? Maybe.
So... do I get one for free for calling it right? 8)
On another note, it looks like all EXO front end (especially with Badgers comment about the dog-bones popping out all the time...) so that means I need to look at the EXO parts to start thinking up some cool new products.
- On it...
Back in early April:
Called it almost to a T... was only wrong on the trans and motor.
I have a theory... stick with me though...
This:
Looks like a smaller version of the exo...
...
I think that with the hobbico aquisition, there's been a lot of shared engineering between these manufacturers...
This leads me to think that the new "go fast" will be something along the lines of something that Tacon / Exceed / Mad Gear / etc makes. It won't be a direct copy, I'm sure, but I would not be surprised if they shared some similar parts at least.
The tacon cage only needs two body clips and the cage flips up to access everything below it:
Coincidence? Maybe.
So... do I get one for free for calling it right? 8)
On another note, it looks like all EXO front end (especially with Badgers comment about the dog-bones popping out all the time...) so that means I need to look at the EXO parts to start thinking up some cool new products.
- On it...
Highmark
I wanna be Dave
RPP has some new pics up:
Axial AX90026 YETI™ 1/10th Scale Electric 4WD – RTR **PRE ORDER**
Axial AX90026 YETI™ 1/10th Scale Electric 4WD – RTR **PRE ORDER**
:lmao: :lmao: It might be just me but that rig looks stupid the way it flips up! That is NOTHING like the YETI.So this is exactly what I posted up a while back that they would do:
Back in early April:
Called it almost to a T... was only wrong on the trans and motor.
The tacon cage only needs two body clips and the cage flips up to access everything below it:
Coincidence? Maybe.
So... do I get one for free for calling it right? 8)
On another note, it looks like all EXO front end (especially with Badgers comment about the dog-bones popping out all the time...) so that means I need to look at the EXO parts to start thinking up some cool new products.
- On it...
Oh, and I did NOT say "the dog-bones popping out all the time", I said it was a couple times which means twice, and it literarily was at the END of the day where we picked up the rig after the second time it happened and left so I can get to the airport in time. :roll:
C*H*U*D
No idea what I'm doing
rockhugger
RCC Addict
"After having a little pow wow in the boardroom one of the Axial minions (they all look the same to me wearing skinny jeans and baby T’s that would look like a belly shirt (cropped top, half shirt, midriff shirt, tummy top) on me)"
owe my eyes :mrgreen:
The dog bone issue is not that big a deal, just means their is tons of travel which is muy bien!!! Or the location of the upper link needs some tweaking to where their is less plunging.
nice write up.
"thumbsup"
owe my eyes :mrgreen:
The dog bone issue is not that big a deal, just means their is tons of travel which is muy bien!!! Or the location of the upper link needs some tweaking to where their is less plunging.
nice write up.
"thumbsup"
Last edited:
turboed13b
Rock Stacker
So this is exactly what I posted up a while back that they would do:
Back in early April:
Called it almost to a T... was only wrong on the trans and motor.
The tacon cage only needs two body clips and the cage flips up to access everything below it:
Coincidence? Maybe.
So... do I get one for free for calling it right? 8)
On another note, it looks like all EXO front end (especially with Badgers comment about the dog-bones popping out all the time...) so that means I need to look at the EXO parts to start thinking up some cool new products.
- On it...
That Tacon is a rebranded lc racing there is no affiliation with madgear/exceed or any other nitrorcx stuff. It is a1/14 scale which is based like the Losi mini 8ight.
Calderwood
I wanna be Dave
"thumbsup"
All I know is that my wife is going to be pissed... I had told her there was going to be a new 2 speed 2.2 adult toy on the market soon. This is not at all what she was thinking.
rockhugger
RCC Addict
what I want to say is inappropriate :evil: so I'll just say shame on you for misleading her.. :lmao:
Why?? You think he isn't good enough? Last I checked he has fun. Does he do stuff that is questionable?... Yes. So... We all do lol. Like I already said he has fun and at the end of the day that is why we all do it. Your comment makes you less deserving then anyone else. Grow up.
Welcome to the site RC Sparks
