I've had good luck with these tazer escs. I hav the 15t which i got wet numerous times and eventually goes back to normal and this one I haven't had any problems and I accidently drag it across the rocks when it fell out on my previous rig one time.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Pro mod Bronco buggy chassis
- Thread starter super mud
- Start date
I've had good luck with these tazer escs. I hav the 15t which i got wet numerous times and eventually goes back to normal and this one I haven't had any problems and I accidently drag it across the rocks when it fell out on my previous rig one time.
XSRCdesign
I wanna be Dave
I like where this is going, nice job!
Its hard to be different, but you are going a good job at it right now.
Keep it up "thumbsup"
Its hard to be different, but you are going a good job at it right now.
Keep it up "thumbsup"
Thanks
More updates.
ax10 tranny was bigger than expected i dont know if i can get it to fit with out cutting into the inside of the gear box :!: I'm also trying to run a bolt up shaft instead a driveshaft since im workin with tight space. I'm thinkin of spending the extra cash on a cold case or something which is alot smaller.
getting everything to clear is getting very hard on this build I also got to worry about if my batteries are going to fit too.
Still more brazing to do, these 2-56 nuts take forever and need 100% concentration.
- shock and link mounts (with some dimple dies
) - front- reverse 4 link (may become a dual triangulated 4 link)
- rear- pan hard bar with triangulated bottoms
- still moving around the suspension
ax10 tranny was bigger than expected i dont know if i can get it to fit with out cutting into the inside of the gear box :!: I'm also trying to run a bolt up shaft instead a driveshaft since im workin with tight space. I'm thinkin of spending the extra cash on a cold case or something which is alot smaller.
getting everything to clear is getting very hard on this build I also got to worry about if my batteries are going to fit too.
Still more brazing to do, these 2-56 nuts take forever and need 100% concentration.
Colby
WOOPOOW!!
This things pretty darn sick! Nice work buddy! "thumbsup"
Thanks, I'm dying to get it finished but It takes forever even though I'm workin on it all the time. If I didn't spend so much time mocking up and measuring then it would come along faster but then the ocd would kick in and I'd be like "fu#% sh%$! I should have done that differently!." lol, so it's alot of thinkin and staring.
edwalsh18
Rock Stacker
sounds like you and I have a lot in common! :mrgreen: just spend a few hours looking at some awesome builds on here for inspiration before you go to work on it. like Metal Masher's builds. or War Pig's, check this out. it should help inspire you.
http://www.rccrawler.com/forum/showthread.php?t=161172
Actually I get all my inspiration from 1:1 rigs on pirate4x4 and stuff. Also I'm tired of all the freakin toyotas cause they pretty much make up the 1.9 forum. I wish people would do more "creative" builds with more tube frames and stuff. (I really like Robbob's fun buggy even though it is a model, it actually gave me some inspiration)
dieselfuel
I wanna be Dave
shit thats some awesome work! the upper shock mounts are fawkin cool!
Colby
WOOPOOW!!
Dude, how do you build something like that with OCD? I have ADD and can hardly stand to build the links on my crawlers.
I don't kno if OCD is a "mental disorder" (which I don't have) I just kno people who are really obsesivley organized say they do and stuff like that. But alot of times for me it's hard to accept something or to be happy with it unless it's absolutley perfect which is annoying. I think I'll grow out of it.
War Pig
I wanna be Dave
That IS a cool pic.
Shouldn't you be done with this by now? I thought we had a competition to see who finished their Bronco first? Mine's been done since May, and I've already completely re-painted it once :mrgreen:.
Last edited:
I did finish it lol. This is just the build for my 2010 rig 8)
I got alot done in the first couple days on this one, now its just little bits at a time. I also moved the brazing equipment into my room so I can get more done a little easier, and I switched to an old mapp torch head for a better flame. (still want to get a oxy/acet setup with a jewlers torch or something lol)
Back to school today but I'll try not to let that slow anything down.
Heres my schedule: A day: jazz band, AP us history, physics, english
B day: Symphonic band, Music technology, AP music theory, Trigonometry. Pretty cool
Still not finished the frame yet, :|. Though I brazed on the majority of nuts to the frame and started trimming the panels and such to fit. And made a fuel cell which will hold the receiver and crap.
Counter sunk 2mm screws will hold the skid plates on
not finished, Though I started using plastic cement which works wonders "thumbsup"
more flex
Counter sunk 2mm screws will hold the skid plates on
not finished, Though I started using plastic cement which works wonders "thumbsup"
more flex
93 FORD BRONCO
Rock Crawler
that thing is bad dude cant wait to see some action pics
Haven't gotten much done lately, been going really slow. School has been taking up all my time too which sucks cause I thought this year was gonna be easy. I got some used 2/3a packs I disassembled and will solder together once I get the battery bars I ordered. Instead I'll be putting the batteries in the fuel cell, which I made a new one. Also brazed the rear servo mount. I cut out a grill out of stainless sheet metal instead of the styrene. Made a tranny cooler/radiator. And I got a bunch of 2-56 button head hex screws which look clean as anything. (Mcmaster for like $6 for 100) Also I need a TRANSFER CASE. anybody selling one cheap?
fine sand and polish
3mm on the right
fine sand and polish
3mm on the right
Last edited:
I got a little more done- started figuring out my wiring.
Batteries soldered- kinda nasty
brass rec. tube frame for fuel cell. (looks like 1 peice:mrgreen
esc leads
still need to finish details on the fuel cell
Motor leads
finished suspension links with aluminium tube
Batteries soldered- kinda nasty
brass rec. tube frame for fuel cell. (looks like 1 peice:mrgreen
esc leads
still need to finish details on the fuel cell
Motor leads
finished suspension links with aluminium tube
Colby
WOOPOOW!!
Just keeps getting better! Keep it up bro! "thumbsup""thumbsup"
