Purple Sudu Mod 3d for Motoj550 FTW!

[motoj550]

I guess it's time to go ahead and do a build thread on this. While waiting on chassis to get here i ordered up some Dlux links and XR10 brass knuckles. Man these knuckles are the bomb (thanks Dlux) they are so smooth. The axles are from my BWD Mantis an d have the RC4WD gears and runnin' Team Brood 35T Intensity's that i've been using for last 3 years and still run great and smooth as hell. Runnin' all plastic housings for lightness and purple GPM alum. chub's, gonna try the lightweight thing on this build and see what all the hype is.

 

[winnerone23]

Wwwhhhhaaaatttttt!?!?!?!?

That's not a BWD chassis! Lol..
Is this going to be ready for ECC, in a week!?

 

[motoj550]

i'm hoping so man, i'm pumped! also got a brand new set of SCX10 shocks with ti-nitrate shafts and machined pistons, Rcbros shock springs.

 

[motoj550]

Shocks built with 25 wt. front and 50 wt. rear and 4mm internal limiting and 89mm eye to eye with the new Fish's crawler parts shock cups in candy purple.

 

[motoj550]

Tires n wheels done, Losi red Boss Claws (using Winnerone23's cut) using De Racing 1/10 buggy wheels 1" wide dyed purple and Vanquish slw hubs, C.I. DD 5.25 narrow soft front and 5.25 narrow medium rear.

 

[winnerone23]

You'll probably want to finishing shaving them side lugs.
The carcass bites Great, with the BC's!
You think they might help but can hinder, just as much, if not more.
Say, the carcass bites and then the lug pops that bite. Now you fall down.
The perfection in the BC's, is they are constant and in constant contact.
Break that contact and you might not like it.

 

[motoj550]

i'm workin' on dremeling them off later winner, too much else to do and sooooo little time, but now the chassis. And Dlux links after 3 tries trying to get the lengths right, thanks Eric for everything and getting it done for me.

 

[Billy D]

That looks awesome. Can't wait to see it skinned.

 

[motoj550]

Got it all together and electronics installed. Smashed micro sidewinders, bec, and purple wiring.

 

[winnerone23]

It'll never work! It doesn't have tires!

 

[motoj550]

Yes it does, i've got your favorite tires

 

[motoj550]

Also got a Barry's RC electronics mount (Thanks Barry)

 

[motoj550]

Things are moving right along, got a Fish's Crawler parts purple battery mount (thanks Fish)

 

[motoj550]

And the panels are done, time to rock n roll at ECC

 

[Zarizi Tech]

Stunning looking rig man! Nice work! "thumbsup""thumbsup"

 

[motoj550]

Stunning looking rig man! Nice work! "thumbsup""thumbsup"

Thanks man.

 

[motoj550]

Well i got the weight down to 4lbs. 5.9oz. last rig was weighing in at 5lbs. 8.5oz. big difference, now to start tuning, only got 2 days to ECC but already feels pretty dialed as it sits. i did exchange out the 4mm limiters in the shocks for 2mm and changed eye to eye to 90mm and seemed to work great.

 

[motoj550]

And i also switched over to the Airtronics MT4s radio, now just to get used to it. I applied a Freakskins skin on it too, of course it had to be purple. Now to get at least a couple batteries through it before ECC Saturday.

 

[winnerone23]

Best remote on the market! You'll get use to it

 

[motoj550]

Also got my sporty all rebuilt with bunch new items, and weight down to 4lbs. 2.4oz. Body is a LC Racing 1/14 scale MT truck and fits all specs perfectly. Tires are panther leopards narrowed by me, and you know me i'm still old school, just can't give them up, they just work too good.